Alimentatori e regolatori di potenza

The Schneider Electric Altivar Machine ATV340 is a robust variable speed drive designed for heavy-duty applications. This drive can handle 3-phase synchronous and asynchronous motors in open and…

The SINAMICS G120C is a robust motor controller designed to deliver a rated power of 18.5KW with an impressive overload capacity of 150% for up to 3 seconds. This high-performance device operates at…

This Altivar Process ATV900 variable speed drive can feed 3-phase synchronous and asynchronous power motors. It is suitable for motors with power rating up to 18.5kW/25hp for applications requiring…

The SINAMICS g120c is a robust motor control center designed for industrial applications. It boasts a rated power of 5.5KW with an impressive overload capacity of 150% for up to 3 seconds. This…

The SINAMICS V20 is a high-performance AC drive designed for industrial automation applications. With a rated power of 3kW, it offers a 150% overload capability for up to 60 seconds. This unfiltered…

Rack ET200MP - si trova sul bus U-connector al centro del rack per alimentare le schede alla sua destra - NON alimenta la CPU. Se desideri un modulo alimentatore standard S7-1500, che si trova a…

Altivar Machine ATV12 is an offer of variable speed drives for commercial equipment and simple machines. It works at a rated power up to 0.75kW / 1hp and a rated voltage from 100V to 120V AC. It is…

The Variable Speed Drive ATV950D30N4 is effective for managing both synchronous and asynchronous motors, supporting applications that require slight overloads of up to 120% for motors rated at 30 kW…

The SINAMICS G120X is a high-performance motor starter with a rated power of 4 kW. This starter is designed to handle the demands of category C2 applications, providing reliable operation under…

The SINAMICS G120C is a high-performance motor drive with a rated power of 7.5kW and a maximum overload capacity of 150% for up to 3 seconds. This drive operates at a voltage range of 3AC380-480V…

Modulo di potenza SINAMICS G120 PM250 con filtro incorporato cl. A, possibilità di rigenerazione, 3AC 380-480V +10/-10% 47-63Hz uscita alta sovraccarico 37kW per 200% 3s, 150% 57s, 100% 240s…

The SIRIUS soft starter is a versatile device that operates at 400V. It comes in two configurations: standard and inside-delta. The standard configuration has a maximum current of 551A and power of…

The PacDrive 3 Power Supply Module is a robust and essential component within the PacDrive 3 range, specifically designed to provide power for integrated servo drives in advanced automation…

TeSys U control and diagnostic unit to be inserted in advanced power bases LUB120, LUB320, LUB380 to form a TeSys U starter controller, for 3-phase motor applications up to 1.5kW@400V. It provides…

The SINAMICS G120X is designed with a rated power of 37 kW . It operates efficiently within the voltage range of 380-480 V, 3 AC. This product is capable of handling up to 110% load for 60 seconds…

Introducing the Schneider Electric TeSys Deca Manual Starter and Protector, a versatile solution that combines manual isolation, manual motor control, and thermal overcurrent protection in a single…

TeSys GV motor circuit breaker, 3 poles (3P), 0.16A/690V, for 3-phase motor applications less than 0.06kW@400V. It provides a thermal-magnetic protection with a thermal setting range 0.1-0.16A…

TeSys GB circuit breaker, 2 poles (2P), 2A/415V, for the protection of industrial equipment control circuits. It provides thermal magnetic protection with a magnetic tripping level at 26A (13 In) and…

Modulo di potenza SINAMICS G120 PM240-2 con filtro integrato classe A e chopper di frenata incorporato, adatto per tensioni di rete 1/3AC 200-240V +10/-10% 47-63Hz. Sovraccarico elevato: 1,5 kW per…

This Altivar 212 variable speed drive can feed 3-phase asynchronous motors. Its protection index is IP21 and it has a built-in EMC filter. It works at a rated power up to 1.5kW / 2hp and a rated…