Azionamenti e motori

The SINAMICS G120 Control Unit CU240E-2 PN E-TYPE Safety Integrated STO PROFINET 6DI, 3DO, 2AI, 2AO, MAX 1F-DI PTC/KTY Interface USB- and SD/MMC-Interface Protection IP20 Ambient Temp 0 to +50 Deg C is a robust solution designed for industrial automation. It features a comprehensive set of interfaces including USB and SD/MMC, providing versatile connectivity options. The unit is equipped with safety features and operates within an ambient temperature range of 0 to +50 degrees Celsius without the need for a power module or panel.

The TeSys island SIL motor starter is designed for reliable control, protection, and monitoring of loads up to 65A and motors up to 30kW@400V / 40hp@480V. It features a 3-phase design with a rating of 65A/690V and is compatible with TPRBC bus coupler for seamless integration. This starter offers a range of motor protection functions including thermal overload (setting 3.35-65A, tripping class 5-30), phase loss, phase unbalance and reversal, long start (stall), locked rotor (jam), rapid cycle lockout, and ground current detection. It also provides monitoring capabilities such as max/average voltages and currents, number of switching cycles, number of faults, active and reactive power/energy when associated with a TPRVM001 voltage module. The TeSys island SIL motor starter is designed for easy mounting on DIN rail along with other modules of the TeSys island configuration. It is multi-standard certified (IEC, UL, CSA, CCC, EAC) and complies with Green Premium standards (RoHS/REACh).

Hybrid motor starter for reversing 3~ AC motors up to 500 V AC and 0.6 A output current, with 24 V DC control voltage, adjustable overload shutdown and emergency stop function to SIL 3/PL e and push-in connection

This product is part of the Lexium 28 range, an offer of motion servo drives for machines from 0.05 to 4.5kW. The brushless servo motor features a high moment of inertia with maximum mechanical speed of 3000RPM and IP65 parallel keyed shaft without holding brake. It is equipped with a 20bit single-turn absolute encoder, optimized in terms of torque and speed of rotation (2000RPM). It is a second generation servo motors suitable for a wide variety of applications due to the different levels of motor inertia offered. It has a rated supply voltage of 220V, a continuous stall current of 6.18A and a continuous power of 1500W. The shaft dimensions are 22mm (Diameter) x 55mm (Length). It is furnished with MIL connector for electrical connection. It is an IP50 (IM V3) and IP65 (IM B5, IM V1) rated product. Its dimensions are 167mm (Length) x 130mm (Width), centring collar dimensions are 8mm (Depth) x 110mm (Diameter) with 145mm circle diameter of the mounting hole. It weighs 7.6kg. This product is compatible with Lexium 28 and Lexium 26D servo drives. It supports Asian standard 130mm flange mount with a natural convection cooling system. Lexium 28 and Lexium BCH2, the optimized servo bundle for all motion control solutions are cost effective, energy efficient and embedded safety. Lexium 28 servo drives and Lexium BCH2 servo motors, optimized servo bundles for compact machines.

PSR softstarter - The compact rangeThe PSR softstarter range is a simple yet reliable starting solution that utilizes only the most basic of soft starting features: soft start and stop. It performs well in applications requiring many starts per hour and is perfect for installations where you need to save space.Main benefits* Small and compact starting solution* Can perform many starts per hour* Reduce energy loss at full speed with built-in bypass.Main features* Rated operational current: 3 to 105 A* Operational voltage: 208–600 V AC* Control supply voltage: 24 V AC/DC or 100–240 V AC.

The PSR3-600-70 softstarter boasts a maximum operational current of 3.9 A, with an operating voltage range spanning from 208 to 600 V AC. The control voltage is set between 100 and 240 V AC at 50/60 Hz. PSR features a two-phase control soft start and stop via a voltage ramp, with built-in bypass for easy installation and energy efficiency. A RUN signal is available from a relay output in NO (normally open state). The start/stop ramp and time can be easily adjusted using three potentiometers on the front. This softstarter is often used in combination with a manual motor starter (MMS) from ABB, and mechanical connection kits are available. Fieldbus communication is another popular option, enabled by an external adaptor and a Fieldbus plug. PSR is part of our compact range of softstarters, offering basic functionality and values. They are suitable for small three-phase motors with nominal currents from 3 to 105 A and can handle up to 100 starts per hour. Common applications include pumps, fans, compressors, and conveyors.

The ABB PSR SSTR is a versatile softstarter designed to cater to a wide range of industrial applications. It boasts a compact design, making it an ideal choice for installations where space is at a premium.This softstarter is equipped with advanced features such as soft start and stop, which ensure smooth transitions between on and off states. Its robust construction allows it to handle multiple starts per hour without compromising on performance.The PSR SSTR also comes with an energy-saving feature that reduces energy loss at full speed by incorporating a built-in bypass. This not only enhances its efficiency but also contributes to cost savings in the long run.With a rated operational current ranging from 3 to 105 A and an operational voltage of 208–600 V AC, this softstarter is capable of handling high-power applications. It can be powered by either 24 V AC/DC or 100–240 V AC, providing flexibility in installation.

The Schneider Electric Lexium 52 Servo Motor, Model MH3 070 2,2Nm, is an integral part of the Lexium 52 & Motors range. This servo motor is designed for PacDrive 3 systems and offers a maximum mechanical speed of 8000RPM. It features a parallel key shaft end without holding brake and is equipped with a single-turn SinCos Hiperface® encoder with 128 periods speed feedback resolution. The servo motor has a rated supply voltage of 115V to 480V, a continuous stall current of 2.94A and a continuous power of 1380W. The shaft dimensions are 11mm (diameter) x 23mm (length). It is furnished with rotatable right angled connectors for electrical connection. The product is IP65 rated and has a length of 154mm. The centering collar dimensions are 2.5mm (depth) x 60mm (diameter) with 82mm mounting hole. It weighs 2.3kg. This range is compatible with PacDrive 3 for motion centric machines and supports 70mm international standard flange mount with a natural convection cooling system. The Lexium 52 provides an ideal counterbalance to the Lexium 62 multi-axis servo system, making the PacDrive system one of the most flexible motion control solutions. Lexium Stand alone servo drives from 0.4kW and 7kW for PacDrive based automation solutions.

Experience the convenience of a fuseless load feeder with Siemens' FB S00 series. This direct-on-line starting device is designed for 400 V AC and 24 V DC screw terminal connections in busbar systems. With a size range of S00 1.4 to 2.0 A, it offers a coordination type 2 and an Iq rating of 150 kA. It's also compatible with Type of coordination 1.The FB S00 series is perfect for applications requiring a reliable and efficient power distribution solution. Its 1 NO contactor ensures seamless operation, making it an ideal choice for busbar systems that require both safety and performance.

This product is part of the Lexium 32 & Motors range, an offer of servo motors from 0.4kW to 6kW. The 6-pole AC servo motor features a low moment of inertia with a maximum mechanical speed of 8000RPM and keyed shaft without holding brake. It is an equipped with a single-turn (1,31,072 points/turn) SinCos Hiperface® high resolution absolute encoder. It is a synchronous servo motor with a supply voltage of 480V, a continuous stall current of 4.1A and a maximum continuous power of 1.7W. The shaft dimensions are 14mm (diameter) x 30mm (length). It is furnished with rotatable right angled connectors for electrical connection. It is an IP65 and IP67 rated product. The length of this product is 220mm and the centering collar dimensions are 2.5mm (depth) x 60mm (diameter) with 82mm mounting hole. It weighs 3.62kg. This range is compatible with Lexium 32, Lexium 15 and Lexium 05 servo drives. This product is compatible with LXM05AD17M2 at 200V to 240V single phase. It supports 70mm international standard flange mount with a natural convection cooling system. Lexium 32 is a servo drive range provides drive and motor combination that has exactly the right power, performance and functionality. The Lexium 32 range of servo drives includes four servo drive models with power ratings from 0.15kW to 11kW and the servo motor ranges BMH and BSH series.

Experience the power of our High Feature Reversing Starter, designed for optimal performance in demanding industrial applications. This starter boasts electronic switching and overload protection up to 0.09 kW / 400 V, ensuring reliable operation under heavy loads. The adjustment range of 0.1 to 0.4 A allows for precise control over your system's power consumption. With PROFIenergy technology, you can trust in our starter's energy efficiency and long-term reliability.Enhance your automation capabilities with the option of a 3DI/LC module. This optional feature provides additional functionality and compatibility for seamless integration into your existing systems.

The PSR9-600-70 softstarter boasts a maximum operational current rating of 9 A, with a voltage range from 208 V to 600 V AC. It is designed for a control voltage between 100 and 240 V AC at 50/60 Hz. The device features a two-phase control soft start and stop through a voltage ramp. It also includes built-in bypass for easy installation and energy savings. A RUN signal is available from a relay output in NO (normally open state).The start/stop ramp and time can be easily set using three potentiometers on the front of the device. This softstarter is often used in combination with a manual motor starter (MMS) from ABB, for which mechanical connection kits are available. Another popular option is Fieldbus communication, which can be enabled by an external adaptor and a Fieldbus plug. The PSR range is our most compact softstarters with basic functionality and values.These softstarters are suitable for small three-phase motors with nominal currents from 3 to 105 A and can handle up to 100 starts per hour. Common applications include pumps, fans, compressors, and conveyors.

This product is part of the Lexium 32 range, an offer of motion servo drives for machines from 0.15kW to 7kW. The AC motion servo drive for one axis, features with an integrated EMC filter, compact drive with analogue inputs and pulse train. It provides 1 capture, 2 safety, 4 logic discrete inputs and 2 discrete outputs. Thanks to its compact design this servo drive enables to save on cabinet space and size, reduces the machine footprint and decreases costs. It is a motion servo drive with a rated supply voltage of 200V to 240V, 380V to 480V (three phase), a continuous output current of 3A at 8kHz and a continuous power of 1600W at 400V. It is furnished with terminal for electrical connection and three RJ45 connectors for CANmotion, CANopen, and Modbus, integrated communication interfaces. It is an IP20 rated product. Its dimensions are 48mm (Width) x 237mm (Depth) x 270mm (Height). It weighs 1.8kg. This product is certified by CE, CSA, RoHS, TUV and UL. It meets EN/IEC 61800-3 and EN/IEC 61800-5-1 standards. This product is compatible with servo motors BMH and BSH. Servo drive range with four servo drive models and two servo motor families plus an intelligent selection of options. It provides you with the drive and motor combination that has exactly the right power, performance and functionality.

This Altistart 22 soft starter can feed 3-phase asynchronous motors in supply line or delta connection. It has a rating of 250A and 230V to 440V, a rated power up to 132kW (400V to 440V in supply line) and up to 220kW (400V to 440V in motor delta connection). It is designed for simple and complex machines such as centrifugal and piston pumps, fans, screw compressors and material handling equipment. Slim form factor improves versatility; allows mounting in frames of any kind of machines. It features an Integrated bypass, this reduces noise and decreases heat dissipation. Compatibility with SoMove software allows configurations and settings to be easily transferred, meaning spares can be quickly installed. It provides smooth starting for your machinery, avoiding mechanical stresses and extending their service life.

The TeSys U control and diagnostic unit is designed to be integrated into advanced power bases such as LUB120, LUB320, and LUB380, forming a comprehensive starter controller for 1-phase motor applications up to 2.2kW at 400V.This control unit provides robust protection to motors with adjustable rated current from 3A to 12A, overload tripping class 10, short circuit protection at 13 times the maximum current, and overcurrent protection at 14.2 times the rated current. It also includes features such as phase loss detection and insulation fault protection (equipment only).The unit offers a thermal overload alarm that can be used locally with a LUFDA module or remotely with a LULC module, along with a test push button for simulating overload conditions. It requires a 24V DC voltage for the control of the starter through its control terminals A1/A2 located in the power base.Certified for use with LUB power bases (IEC, UL, CSA, CCC, EAC, Marine), this product is also Green Premium compliant (RoHS/REACh).

The SIRIUS motor starter M200D AS-i is designed as a basic electronic reversing starter, featuring AS-Interface communication for seamless integration into your system. Key Features: Suitable for switching AC-3 at 0.75KW / 400V with a current range of 0.15A to 2.00A Electronic overload protection using Thermistor: THERMOCLICK / PTC with brake contact DC voltage of 180V for reliable operation Compatible with Han Q4/2 - Han Q8/0 connectors for easy installation and maintenance

The softstarter PSR60-600-70 has a rated maximum operational current of 60 A with an operating voltage span from 208...600 V AC. The rated control voltage is between 100...240 V AC at 50/60 Hz. PSR features a two-phase control soft start and stop through a voltage ramp. It has built-in bypass for easy installation and energy saving. A RUN and a TOR signal is available from a relay output in NO (normally open state). The start/stop ramp and time is easy to set by three potentiometers on the front. PSR is often used in combination with a manual motor starter (MMS) from ABB, so mechanical connection kits are available. Another popular option is Fieldbus communication, which can be enabled by an external adaptor and a Fieldbus plug. The PSR range is our most compact softstarters with basic functionality and values. They are suitable for small three-phase motors with nominal currents from 3...105 A and can manage up to 100 starts per hour. Common applications are, for example, pumps, fans, compressors, and conveyors.

TeSys U control and diagnostic unit to be inserted in advanced power bases LUB120, LUB320, LUB380 to form a TeSys U starter controller, for 1-phase motor applications up to 0.09kW@400V. It provides full protection to motors with a rated current Ir 0.35-1.4A (Ir adjustable), overload tripping class 10, short circuit at 13 x Irmax, overcurrent at 14.2 x Ir, phase loss, insulation fault (protection of equipment only). It provides a thermal overload alarm to be used locally using a LUFDA module or remotely using a LULC module, and a test push button for overload simulation. To be used with a 24V DC voltage for the control of the starter (through the control terminals A1/A2 located in the power base). Certified when used in conjunction with a LUB power base (IEC, UL, CSA, CCC, EAC, Marine), Green Premium compliant (RoHS/REACh).

TeSys island direct SIL starter, 3 poles, 38A/690V. Connected to a TPRBC bus coupler it controls, protects and monitors loads up to 38A and motors up to 18,5kW@400V / 20hp@480V. In association with a TPRSM001 module and an external safety device, it can be used for safety related systems conforming to IEC 61508. It provides motor protection functions including thermal overload (setting 0.76-38A, tripping class 5-30), phase loss, phase unbalance and reversal, long start (stall), locked rotor (jam), rapid cycle lockout, ground current detection. Monitoring of the load includes max/average voltages and currents, number of switching cycles, number of faults, active and reactive power/energy when associated to a TPRVM001 voltage module. Mounting on DIN rail together with the other modules of the TeSys island configuration. Multi standards certified (IEC, UL, CSA, CCC, EAC), Green Premium compliant (RoHS/REACh).

The PSTX300-600-70 Softstarter is designed to provide smooth and reliable motor starting for medium to large-sized three-phase motors. With a rated maximum operational current of 300 A and an operating voltage range of 208 to 600 V AC, this softstarter ensures efficient and controlled motor operation.The PSTX300-600-70 features a three-phase control soft start and stop through a voltage or torque ramp, making it ideal for applications requiring precise motor control. It includes a built-in bypass for easy installation and energy saving, as well as a detachable full graphic display with IP66 and 4x outdoor rating for user-friendly interaction.Key Features:Rated operational current: 300 AOperating voltage: 208...600 V ACControl voltage: 100...250 V AC at 50/60 HzThree-phase control soft start and stopBuilt-in bypass for energy savingDetachable full graphic display with IP66 and 4x outdoor ratingCurrent limit, kickstart, analog output, EOL, motor heating, and pump cleaning functionsJog, braking, stand-still brake, diagnostics, sequence start, and emergency/fire pump modeFieldbus communication options including Modbus RTU, Profinet, Profibus, Modbus TCP, Ethernet IP, and othersApplications:The PSTX300-600-70 is suitable for a wide range of applications, including:PumpsFansCompressorsConveyors