Azionamenti e motori

TeSys U standard control unit to be inserted in power bases LUB12, LUB32, LUB38 to form a TeSys U starter controller, for 3-phase motor applications up to 0.25kW@400V. It provides full protection to motors with a rated current Ir 0.35-1.4A (Ir adjustable), overload tripping class 10, short circuit at 13 x Irmax, overcurrent at 14.2 x Ir, phase loss, insulation fault (protection of equipment only). To be used with a 24V DC voltage for the control of the starter (through the control terminals A1/A2 located in the power base). Certified when used in conjunction with a LUB power base (IEC, UL, CSA, CCC, EAC, Marine), Green Premium compliant (RoHS/REACh).

TeSys U control and diagnostic unit to be inserted in advanced power bases LUB120, LUB320, LUB380 to form a TeSys U starter controller, for 1-phase motor applications up to 0.09kW@400V. It provides full protection to motors with a rated current Ir 0.35-1.4A (Ir adjustable), overload tripping class 10, short circuit at 13 x Irmax, overcurrent at 14.2 x Ir, phase loss, insulation fault (protection of equipment only). It provides a thermal overload alarm to be used locally using a LUFDA module or remotely using a LULC module, and a test push button for overload simulation. To be used with a 24V AC voltage for the control of the starter (through the control terminals A1/A2 located in the power base). Certified when used in conjunction with a LUB power base (IEC, UL, CSA, CCC, EAC, Marine), Green Premium compliant (RoHS/REACh).

The SINAMICS g120c is a robust, high-performance drive system designed for industrial applications. With a rated power of 1.5KW and an overload capacity of 150% for up to 3 seconds, it delivers reliable performance under demanding conditions.The integrated filter class A I/O-interface provides six digital inputs (6DI), two digital outputs (2DO), one analog input (1AI), and one analog output (1AO). This ensures seamless communication and control in your industrial setup.Safety is a key feature of the SINAMICS g120c. It incorporates Safe Torque Off technology for enhanced safety, and it's equipped with integrated fieldbus PROFINET-pn protection. The IP20/UL open type design ensures durability and reliability in various environments.The SINAMICS g120c is compact, with dimensions of 173x73x178mm (HxWxD), making it suitable for a wide range of industrial applications. It's also designed to operate on external 24V power supply.

The Schneider Electric Altistart 48 is a sophisticated soft starter controller that utilizes six thyristors to facilitate torque-controlled soft starting and stopping of three-phase asynchronous motors. This device provides a range of functionalities including soft start, deceleration, machine protection, motor protection, and communication with control systems.Operating at a rated supply voltage ranging from 208V to 690V AC with an 88A rating, the Altistart 48 ensures smooth transitions and reduced mechanical stress. Its torque control system enables single acceleration ramps for easy adjustments regardless of the load.Suitable for motors with power ratings up to 75hp (at 575V) / 75kW (at 690V) for standard applications and 60hp (at 575V) / 55kW (at 690V) for severe applications, the Altistart 48 is designed to cater to a wide range of industrial needs. It boasts a compact design with dimensions of 190mm width, 290mm height, and 235mm depth, weighing 8.3kg.The Altistart 48 is ideal for centrifugal machines, pumps, fans, compressors, and conveyors, commonly found in construction, food and beverage, and chemical industries. It adheres to the IEC/EN 60947-4-2 standard and is certified with CE, UL, CSA, DNV, C-Tick, GOST, CCC, NOM, SEPRO, and TCF.Connecting directly to the Modbus bus via its RJ45 connector port, the Altistart 48 can also be linked to Ethernet, Fipio, Profibus DP, and DeviceNet networks through a separate module. It is designed for vertical mounting on a panel with four fixing holes.With its Torque Control System (TCS) for controlled starting and deceleration, the Altistart 48 offers seamless integration into enclosures and control systems. This range provides continuous improvement in machine operation by reducing mechanical or hydraulic stress and limiting energy loss and temperature rise.

The RSGD4037E0VX20 from Carlo Gavazzi is a highly advanced industrial automation product that is designed to meet the demands of modern industrial processes. This component is a solid-state relay that is capable of controlling various types of loads such as resistive and inductive loads, making it a versatile solution for a wide range of applications. It is equipped with a high switching capacity of 37A and a voltage rating of 20-280VAC, making it suitable for use in high-power applications. The RSGD4037E0VX20 also features a built-in overvoltage protection system that ensures reliable and safe operation in harsh industrial environments. With its compact size, the RSGD4037E0VX20 can be easily integrated into existing systems, making it an ideal choice for upgrading and improving industrial automation processes.

This Altistart 22 soft starter can feed 3-phase asynchronous motors in supply line connection. It has a rating of 110A, a rated power from 30HP to 100HP and a rated voltage from 230V to 575V AC. It is designed for simple and complex machines such as centrifugal and piston pumps, fans, screw compressors and material handling equipment. Slim form factor improves versatility; allows mounting in frames of any kind of machines. It features an Integrated bypass, this reduces noise and decreases heat dissipation. Compatibility with SoMove software allows configurations and settings to be easily transferred, meaning spares can be quickly installed. It provides smooth starting for your machinery, avoiding mechanical stresses and extending their service life.

Hybrid motor starter for starting 3~ AC motors up to 500 V AC and 9 A output current, with 24 V DC control voltage, adjustable overload shutdown and emergency stop function to SIL3 /PL e, and screw connection.

TeSys U control and diagnostic unit to be inserted in advanced power bases LUB320, LUB380, LUB380 to form a TeSys U starter controller, for 3-phase motor applications up to 7.5kW@400V. It provides full protection to motors with a rated current Ir 4.5-18A (Ir adjustable), overload tripping class 10, short circuit at 13 x Irmax, overcurrent at 14.2 x Ir, phase loss, insulation fault (protection of equipment only). It provides a thermal overload alarm to be used locally using a LUFDA module or remotely using a LULC module, and a test push button for overload simulation. To be used with a 24V DC voltage for the control of the starter (through the control terminals A1/A2 located in the power base). Certified when used in conjunction with a LUB power base (IEC, UL, CSA, CCC, EAC, Marine), Green Premium compliant (RoHS/REACh).

TeSys U control and diagnostic unit to be inserted in advanced power bases LUB320, LUB380, LUB380 to form a TeSys U starter controller, for 3-phase motor applications up to 15kW@400V. It provides full protection to motors with a rated current Ir 8-32A (Ir adjustable), overload tripping class 10, short circuit at 13 x Irmax, overcurrent at 14.2 x Ir, phase loss, insulation fault (protection of equipment only). It provides a thermal overload alarm to be used locally using a LUFDA module or remotely using a LULC module, and a test push button for overload simulation. To be used with a 24V DC voltage for the control of the starter (through the control terminals A1/A2 located in the power base). Certified when used in conjunction with a LUB power base (IEC, UL, CSA, CCC, EAC, Marine), Green Premium compliant (RoHS/REACh).

The TeSys U control and diagnostic unit is designed to be inserted in advanced power bases such as LUB320, LUB380, or LUB380 to form a TeSys U starter controller for 3-phase motor applications up to 15kW@400V. It offers full protection to motors with a rated current of 8-32A (Ir adjustable), overload tripping class 10, short circuit at 13 x Irmax, and overcurrent at 14.2 x Ir. It also includes features such as phase loss, insulation fault (protection of equipment only), a thermal overload alarm, and a test push button for overload simulation.This unit is compatible with a 110-240V AC / 110-220V DC voltage for the control of the starter through the control terminals A1/A2 located in the power base. It is certified when used in conjunction with a LUB power base (IEC, UL, CSA, CCC, EAC, Marine), and Green Premium compliant (RoHS/REACh).

This product is part of the PacDrive 3 range, an offer of integrated servo motors for machines from 0.31kW to 1.91kW. The 8-pole integrated servo motor features 3 stacks with a maximum mechanical speed of 3000RPM, a continuous rated stall torque of 5.8Nm, and a parallel keyed shaft. It is equipped with a single-turn SinCos Hiperface® absolute encoder (128 periods per revolution) without a holding brake. It is an integrated servo motor with a supply voltage of 250V to 700V, a continuous stall current of 3.6A, and a maximum continuous power of 1.1kW. The shaft dimensions are 19mm (diameter) x 40mm (length). It is an IP54 rated product. The length of this product is 285mm and the centering collar dimensions are 3.5mm (depth) x 95mm (diameter) with 115mm mounting hole. It weighs 8.1kg. It is suitable for use in general machine control, packaging machine automation, and material handling applications. It supports international standard 100mm flange mount with a natural convection cooling system. Lexium 62 ILM integrated servo modules can be controlled with all PacDrive LMC Eco and Pro/Pro 2 series motion controllers via SERCOS communication. Multiaxis integrated servo drives from 0.31kW to 1.91kW for automation solutions based on PacDrive 3.

This product is part of the Lexium 52 & Motors range, an offer of servo motors for PacDrive 3. The 3-pole servo motor features maximum mechanical speed of 9000RPM and parallel key shaft end without holding brake. It is an equipped with an absolute multi-turn SinCos Hiperface® encoder with 128 periods speed feedback resolution. It is a servo motor with a rated supply voltage of 115V to 480V, a continuous stall current of 0.73A and a continuous power of 290W. The shaft dimensions are 9mm (diameter) x 20mm (length). It is furnished with rotatable right angled connectors for electrical connection. It is an IP65 rated product. The length of this product is 132.5mm and the centering collar dimensions are 2mm (depth) x 40mm (diameter) with 63mm mounting hole. It weighs 1.2kg. This range is compatible with PacDrive 3 for motion centric machines. It supports 55mm international standard flange mount with a natural convection cooling system. Lexium 52 provides an ideal counterbalance to the Lexium 62 multi-axis servo system, making the PacDrive system one of the most flexible motion control solutions. Lexium Stand alone servo drives from 0.4kW and 7kW for PacDrive based automation solutions.

SIMATIC hmi, ktp700 basic, pannello base, comando key/touch, display 7 tft, 65536 colori, interfaccia PROFINET, configurabile da WinCC basic v13/ step 7 basic v13, contiene software open-source, fornito gratuitamente vedi cd allegato

The ABB PSR72-600-11 is a versatile softstarter designed for three-phase motors with nominal currents ranging from 3 to 105 A. It boasts a rated maximum operational current of 72A and operates at voltages spanning from 208V to 600V AC, making it suitable for a wide range of applications. Key Features: Rated control voltage: 24 V AC/DC Two-phase control soft start and stop through a voltage ramp Built-in bypass for easy installation and energy saving RUN and TOR signal available from relay output in NO (normally open state) Easy to set start/stop ramp and time with three potentiometers on the front Compatible with manual motor starters (MMS) for mechanical connection kits Fieldbus communication enabled by external adaptor and Fieldbus plug The PSR72-600-11 is a compact softstarter that can manage up to 100 starts per hour, making it an ideal choice for applications such as pumps, fans, compressors, and conveyors.

This head for selector switch is a separate component of the range of pendant control stations Harmony XAC. It has a dark grey plastic bezel. It is supplied with key operated knob (key n° 455). It features 2 positions maintained, at 90°. Its wide range of operating temperatures from -25°C to 70°C allows versatility in usage of product. It is easily installed and replaced on XAC pendant control stations in diameter 22.5mm cut-out. It is impact resistant, dust resistant, water resistant and vibration resistant thanks to its IP65. It weighs 20g. It is IEC 60947-5-1, UL 508 and CSA C22.2 n° 14 compliant.

The softstarter PSR3-600-11 has a rated maximum operational current of 3 A with an operating voltage span from 208...600 V AC. The rated control voltage is 24 V AC/DC. PSR features a two-phase control soft start and stop through a voltage ramp. It has built-in bypass for easy installation and energy saving. A RUN signal is available from a relay output in NO (normally open state). The start/stop ramp and time is easy to set by three potentiometers on the front. PSR is often used in combination with a manual motor starter (MMS) from ABB, so mechanical connection kits are available. Another popular option is Fieldbus communication, which can be enabled by an external adaptor and a Fieldbus plug. The PSR range is our most compact softstarters with basic functionality and values. They are suitable for small three-phase motors with nominal currents from 3...105 A and can manage up to 100 starts per hour. Common applications are, for example, pumps, fans, compressors, and conveyors.

The softstarter PSE37-600-70 has a rated maximum operational current of 37 A with an operating voltage span from 208...600 V AC. The rated control voltage is between 100...250 V AC at 50/60 Hz. PSE features a two-phase control with a soft start and stop through a voltage or a torque ramp. It has built-in bypass for easy installation and energy saving. A RUN, TOR, and Event signal is available from a relay output in NO (normally open state). The PSE has functions such as current limit, kickstart, analog output, EOL, underload, and locked rotor protection. To interact with PSE, it has an Illuminated display that uses symbols to become language neutral. As an option, you can add an identical external keypad with a rating of IP66. There are three ways to communicate with PSE. It can be done by hardwire inputs Start/Stop or by Reset of fault. Another popular option is the built-in fieldbus communication Modbus RTU. You can also use an external adaptor and a Fieldbus plug. PSE is a true general pur­pose softstarter. It’s a perfect balance be­tween high starting capacity and cost effi­ciency. Very suitable for small to medium-sized three-phase motors with nominal currents from 18...370 A. Typical applications are, for example, pumps, fans, compressors, and conveyors.

Questo soft starter Altistart 22 può alimentare motori asincroni trifase in linea di alimentazione o collegamento a triangolo. Ha una potenza nominale di 140 A e da 230 V a 440 V, una potenza nominale fino a 75 kW (da 400 V a 440 V nella linea di alimentazione) e fino a 110 kW (da 400 V a 440 V nel collegamento a triangolo del motore). È progettato per macchine semplici e complesse come pompe centrifughe e a pistoni, ventilatori, compressori a vite e attrezzature per la movimentazione dei materiali. Il fattore di forma sottile migliora la versatilità; Consente il montaggio nei telai di qualsiasi tipo di macchina. È dotato di un bypass integrato, che riduce il rumore e diminuisce la dissipazione del calore. La compatibilità con il software SoMove consente di trasferire facilmente le configurazioni e le impostazioni, il che significa che i pezzi di ricambio possono essere installati rapidamente. Fornisce un avviamento regolare dei macchinari, evitando sollecitazioni meccaniche e prolungandone la durata.

The SIRIUS soft starter is designed to provide reliable and efficient motor control across various industrial applications. With a rating of 12.5A and a capacity of 5.5 kW at 400V, this device ensures smooth operation while maintaining optimal performance.Key Features:AC voltage range: 200-480VTemperature rating: 40°CScrew terminal connections for easy installationThermistor motor protection to safeguard against overheating

TeSys U control and diagnostic unit to be inserted in advanced power bases LUB320, LUB380 to form a TeSys U starter controller, for 3-phase motor applications up to 15kW@400V. It provides full protection to motors with a rated current Ir 8-32A (Ir adjustable), overload tripping class 20, short circuit at 13 x Irmax, overcurrent at 14.2 x Ir, phase loss, insulation fault (protection of equipment only). It provides a thermal overload alarm to be used locally using a LUFDA module or remotely using a LULC module, and a test push button for overload simulation. To be used with a 110-240V AC / 110-220V DC voltage for the control of the starter (through the control terminals A1/A2 located in the power base). Certified when used in conjunction with a LUB power base (IEC, UL, CSA, CCC, EAC, Marine), Green Premium compliant (RoHS/REACh).