Contattori e relè

2 x 1 co + 1 no, width 45 mm, 24 v to 240 V AC/DC, (sensor-dependent), -99 degrees c to 1800 degrees c 2 thresholds, digital, thermocouple j,k,t,e,n,s,r,b, in accordance with din 3440, temperature sensor/limiter

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 4 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactor has two normally open and two normally closed power contacts. Power contacts have a 60A resistive load rating. Contactor is supplied with a 110 VAC 50/60 Hz coil. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 5.00 inches tall, 3.35 inches wide and 4.92 inches deep. It weighs 3.17 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

The DC Solenoid System is an innovative solution designed to meet the specific needs of railway applications. It features a 4NO+4NC Contactor Relay, which ensures reliable and efficient operation in demanding environments. The relay is equipped with screw terminals for easy installation and connection.The system operates at 24V DC, making it compatible with a wide range of applications. It also incorporates a varistor to protect against voltage surges and ensure stable operation within the operating range of 0.7 to 1.25xUS.This system is compliant with DIN EN 50011, ensuring it meets the highest standards for safety and reliability in railway applications. Its compact design and robust construction make it an ideal choice for any railway environment.

The SIRIUS Safety Relay is a robust and reliable solution designed for safety-oriented speed monitoring in industrial automation systems. It operates at 24 V DC, making it compatible with a wide range of devices. The relay features a screw terminal design for easy installation and maintenance, with an overall width of 45 mm. This model offers two EC instantaneous outputs (2 NO) and EC delayed output (0 SC), along with electrical auto-start/manual start capabilities. As a basic device, it adheres to the highest safety standards, including EN 13849-1: e and IEC 61508: 3, ensuring maximum achievable performance levels.

This safety relay is designed for monitoring Emergency stop, Guard switch, Magnetic switch, Proximity safety switch, PNP sensor, RFID safety switch or safety light curtain. The safety relay is powered with 24V AC/DC, and equipped with a screw removable terminal block. This universal safety module embeds pre-defined safety functions, or selectable safety functions via rotary selectors. This safety relay embeds 6 safety inputs, 7 ON/OFF configurable pulsed outputs, 3 NO, 1 NC safety outputs, and 1 solid-state diagnostic output with complete status information. The maximum safety level achieved by this safety relay is PLe/Category 4 conforming to ISO 13849-1, SILCL 3 conforming to IEC 62061, SIL 3 conforming to IEC 61508. This safety relay weighs 0,350kg. Its dimensions are 45mm (Width) x 120mm (Depth) x 100mm (Height). This safety relay weighs 0,350kg. Its dimensions are 45mm (Width) x 120mm (Depth) x 100mm (Height). This safety relays is suitable for applications such as Food and Beverage, Hoisting, Material Handling, Material Working, Packaging. This safe relay conforms to IEC60947-5-1, IEC61508-1/2/3, ISO13849-1, IEC62061 functional safety standards, is certified by cULus, TÜV, EAC, CCC and KC marking. Harmony safety relays are compatible with Modicon logic controllers. This relay is mounted on a 35mm symmetrical DIN rail. Harmony XPS Basic and Universal safety relays are the first choice for managing single safety functions easily, typically in machines of simple to medium complexity. Harmony XPS Universal is the first choice for a broad range of simple to mid-complex machines.

Safety relay for emergency stop and safety door up to SIL 1, SIL CL 1, Cat. 1, PL c, depending on the application up to SIL 3, SIL CL 3, Cat. 4, PL e, single-channel operation, 4 enabling current paths, US = 24 V AC/DC, plug-in screw terminal blocks

The CM-MPN.52S is a multifunctional relay from the CM three-phase monitors range. It operates with a rated control supply voltage / three-phase measuring voltage of 350-580 V AC 50/60 Hz and has a 2 c/o (SPDT) output with contacts rated at 250 V / 4 A. This relay monitors all phase parameters such as over/undervoltage, phase unbalance and phase failure. The corresponding threshold values are adjustable. The CM-MPN.52S also offers selection of phase sequence monitoring, automatic phase sequence correction as well as an ON or OFF tripping delay. The output contacts can be configured as 1x2 c/o (SPDT) contacts (common signal) or 2x1 c/o (SPDT) contact (separate signal for over- and undervoltage thresholds) operation. The tripping delay is adjustable over a range of instantaneous to 30 s (0, 0.1-30 s). A sealable transparent cover for protection against unauthorized changes is available as accessory. The device offers screw connection technology with double-chamber cage connection terminals.

The TMP MON REL is a temperature monitoring relay designed for overshoot protection. It features a PT100 sensor that measures temperatures ranging from -50°C to 50°C. This relay operates on a control voltage of 24V AC/DC, providing a 1 NO (Normally Open) and 1 NC (Normally Closed) output. The quiescent current principle ensures efficient operation while the spring-loaded terminal ensures reliable connection.It's important to note that this product is phased out. The preferred successor is the 3RS2500-2AA30, which offers enhanced features and improved performance.

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 80A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 25HP at 200 to 208VAC, 30HP at 240VAC, 60HP at 480VAC and 60HP at 600VAC three phase. Contactor is also rated for 7.5HP at 115VAC and 15HP at 240VAC single phase. Contactor is supplied with a 24 VDC coil with transient suppressor module. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Ring-lug screw terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 5.00 inches tall, 3.35 inches wide and 7.32 inches deep. It weighs 5.71 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

This digital monitoring relay is designed to automatically correct the phase sequence and detect and correct voltage failures in three-phase power systems. It operates within a voltage range of 160-690 V AC at frequencies of 50 to 60 Hz, providing undervoltage and overvoltage protection with a hysteresis of 160-690 V. The relay also features a switch-off delay of 0-20 s and an asymmetry tolerance of 0-20%. It includes two control outputs (CO) for phase correction and line supply faults, as well as screw terminals for easy installation.Key Features:Automatic phase sequence correctionVoltage failure detection and correctionUndervoltage and overvoltage protectionSwitch-off delay of 0-20 sAsymmetry tolerance of 0-20%Two control outputs (CO) for phase correction and line supply faultsScrew terminal connections

The Digital Monitoring Relay, designed for fault current monitoring, offers a setting range from 0.03A to 40A. This relay is equipped with separate settings for warning threshold and switch-off value. It supports supply voltages ranging from 24V to 240V AC/DC at frequencies of 50 to 60Hz.The relay features a startup delay and tripping delay of 0.1 to 20 seconds, with shutdown hysteresis up to 50% and warning hysteresis of 5%. It has a fixed width of 22.5mm and includes two change-over contacts. The relay can be configured with or without an error log and comes with screw terminals for easy installation.

TeSys GV auxiliary contact block, for motor circuit breakers GV2 and GV3. 1NO fault signaling contact + 1NO instantaneous auxiliary contact. Instantaneous auxiliary contact rated for operation up to 6A/690V AC and 6A/240V DC. Fault signaling contact rated for operation up to 2A/240V AC and 1A/60V DC. To be installed on left-hand side of the circuit breaker (1 block mounting maximum), connection by screw clamp terminals. Multi standards certified (IEC, UL, CSA, CCC, EAC), Green Premium compliant (RoHS/REACh).

The CT-ERS.22P is a single-function electronic time relay from the CT-S timer range. It provides an ON-delay (delay on make) function with 10 time ranges from 0.05 s to 300 h. This time relay operates with a rated control supply voltage of 24 - 48 V DC / 24 - 240 V AC and has a 2 c/o (SPDT) output with contacts rated at 250 V / 4 A. A sealable transparent cover for protection against unauthorized changes is available as accessory. The device offers maintenance free Easy Connect Technology with push-in terminals.

The AF12-30-01-13 is a robust contactor designed for controlling motors up to 5.5 kW / 400 V AC (AC-3) or 7-1/2 hp / 480 V UL and switching power circuits up to 28 A (AC-1) or 28 A UL general use. This contactor features a wide control voltage range of 100-250V 50/60 Hz and DC, enabling it to manage large control voltage variations effectively. The AF technology ensures distinct operations in unstable networks, reducing panel energy consumptions. Additionally, the contactor comes with built-in surge protection for a compact solution. With a block type design, the AF12-30-01-13 can be easily extended with add-on auxiliary contact blocks and a wide range of accessories. Its robust construction and versatile features make it an ideal choice for various industrial applications.

SIRIUS, modulo centrale avanzato 3RK3 per sistema di sicurezza modulare 3RK3 4/8 f-di, 1f-ro, 1 f-do, 24VDC monitor schiavi asi, controllo delle uscite sicure su bus as-i configurabile tramite software mss es larghezza 45mm terminale a vite fino alla categoria 4 (en954-1) fino a sil3 (iec 61508) fino al livello di prestazione e (iso 13849-1)

The AC-3 power contactor is designed for high power applications with a rating of 95 A and a maximum power handling capacity of 45 kW / 400 V. This industrial-grade contactor features 1 normally open (NO) and 1 normally closed (NC) contacts, making it suitable for a wide range of applications.The AC-3 contactor is designed to operate at 24 V DC, providing reliable and efficient power control in your system. It also comes with screw terminals for easy installation and an integrated varistor for surge protection.This contactor is available in size S3 and is suitable for 2 A PLC outputs, making it a versatile choice for various industrial automation applications.

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 95A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 25HP at 200 to 208VAC, 30HP at 240VAC, 60HP at 480VAC and 60HP at 600VAC three phase. Contactor is also rated for 7.5HP at 115VAC and 15HP at 240VAC single phase. Contactor is supplied with a 48 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 5.00 inches tall, 3.35 inches wide and 5.12 inches deep. It weighs 3.55 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

Il Siemens CONTACTOR S00 7A 24VDC 1NC SCRW è un contattore di potenza robusto ed efficiente progettato per applicazioni di controllo industriale. Con una corrente nominale di 7 A e una potenza nominale di 3 kW a 400 V, questo contattore a 3 poli garantisce prestazioni affidabili in ambienti difficili. Il dispositivo è dotato di una bobina da 24 V c.c. e include un contatto ausiliario da 1 NC, che lo rende adatto a vari circuiti di controllo.Progettato per durare nel tempo, il contattore vanta una durata meccanica fino a 30 milioni di cicli di funzionamento, garantendo un'affidabilità a lungo termine. Le dimensioni compatte S00 e i collegamenti con morsetti a vite facilitano l'installazione e l'integrazione nei pannelli di controllo. Inoltre, il contattore è conforme agli standard IEC 60947-4-1 e IEC 60947-5-1, garantendo sicurezza e prestazioni in ambienti industriali.Il contattore è progettato per applicazioni di spegnimento di sicurezza ed è dotato di protezione tattile a prova di dita sulla parte anteriore secondo IEC 60529 con classe di protezione IP20. È inoltre conforme alle direttive RoHS e REACH, a testimonianza dell'impegno di Siemens per la responsabilità ambientale.Applicazioni: Il Siemens CONTACTOR S00 è ideale per l'uso in centri di controllo motori, sistemi di automazione e altre applicazioni di controllo industriale in cui la commutazione e il controllo affidabili sono fondamentali.

TeSys Giga high power contactor, 3 poles (3 NO) for category AC-3 applications up to 185A 110kW@440V. It provides a 200-500V AC/DC wide band low consumption electronic coil, PLC output control and embedded highly reliability 1NO+1NC auxiliary contact block (17V 1mA). Designed for demanding applications with maximum operating rates up to 600 cycles per hour and environments until 60°C. It procures high reliability and durability with 5 Mcycles mechanical durability. Local and Remote Contact Wear Diagnosis (CWD) as standard function, continuous monitoring with healthy and alarm indicators. It is possibility to replace switching module (main contacts), enhancement contactor life. Contactor can be fixed in all quadrants, maintenance without removing cables/busbars, and OLR could be directly mounted below contactor. To be used with power connection by bolted connection with cable memory kit and control connections by spring terminals, accessible from front for easy and quick replacement. It provides IP2x protection in Front face with shrouds conforming to IEC 60529 and VDE 0106. It can cover -25°C to 60°C operation ambient air temperature and directly mounted on plate, No derating up to 3000m altitude. The dimension is 255mm x 108mm x 175mm (H x W x D), compact size enables panel space savings. Multi standards certified(CE,CB,CCC,cULus,EAC,KC,RCM,Marine) and Green Premium compliant (RoHs/Reach). Unique QR code provides quick access to complete product data.

The SENTRY BSR10 24VDC is a robust safety relay designed to monitor the status of safety devices. It features relay outputs, including 3 normally open (3NO) and 1 normally closed (1NC), with a +24 VDC supply voltage. The relay comes equipped with screw terminals for easy installation.This safety relay is ideal for direct integration into the voltage supply circuit of the relay, making it suitable for monitoring emergency stops or other safety-critical applications. Additionally, it can be used as an expansion relay in conjunction with a safety relay or safety PLC to increase the number of safe outputs.