Contattori e relè

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 150A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 40HP at 200 to 208VAC, 50HP at 240VAC, 100HP at 480VAC and 125HP at 600VAC three phase. When used with a 480VAC up to 250A circuit breaker, this contactor can have a SCCR up to 100kA. When used with up to a 600VAC 300A Class J or CC fuse, this contactor can have a SCCR up to 100kA. Contactor is supplied with a 230 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 6.22 inches tall, 4.72 inches wide and 5.35 inches deep. It weighs 5.51 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

TeSys Giga high power contactor, 3 poles (3 NO) for category AC-3 applications up to 225A 132kW@440V. It provides a 48-130V AC/DC wide band low consumption electronic coil and embedded highly reliability 1NO+1NC auxiliary contact block (17V 1mA). Designed for demanding applications with maximum operating rates up to 600 cycles per hour and environments until 60°C. It procures high reliability and durability with 5 Mcycles mechanical durability. Local Contact Wear Diagnosis (CWD) as standard function, continuous monitoring with healthy and alarm indicators. It is possibility to replace switching module (main contacts), enhancement contactor life. Contactor can be fixed in all quadrants, maintenance without removing cables/busbars, and OLR could be directly mounted below contactor. To be used with power connection by bolted connection and control connections by spring terminals, accessible from front for easy and quick replacement. It provides IP2x protection in Front face with shrouds conforming to IEC 60529 and VDE 0106. It can cover -25°C to 60°C operation ambient air temperature and directly mounted on plate, No derating up to 3000m altitude. The dimension is 255mm x 108mm x 175mm (H x W x D), compact size enables panel space savings. Multi standards certified(CE,CB,CCC,cULus,EAC,KC,RCM,Marine) and Green Premium compliant (RoHs/Reach). Unique QR code provides quick access to complete product data.

This safety relay is designed for monitoring Emergency stop, Guard switch, Magnetic switch, RFID safety switch and Safety light curtain. The safety relay is powered with 24V AC/DC, and equipped with a screw removable terminal block. This universal safety module embeds pre-defined safety functions, or selectable safety functions via rotary selectors. This safety relay embeds 2 safety inputs, 3 control outputs, 2 NO immediate, 3 NO configurable and 1 NC configurable safety output, 1 diagnostic output. The maximum safety level achieved by this safety relay is PLe/Category 4 conforming to ISO 13849-1, SILCL 3 conforming to IEC 62061, SIL 3 conforming to IEC 61508. This safety relay weighs 0,200kg. Its dimensions are 22,5mm (Width) x 120mm (Depth) x 100mm (Height). This safety relays is suitable for applications such as Food and Beverage, Hoisting, Material Handling, Material Working, Packaging. This safe relay conforms to IEC 60947-5-1, IEC 61508-1, IEC 61508-2/-3, ISO 13849-1, IEC 62061 functional safety standards, is certified by cULus, TÜV. Harmony safety relays are compatible with Modicon logic controllers. This relay is mounted on a 35mm symmetrical DIN rail. Harmony XPS Basic and Universal safety relays are the first choice for managing single safety functions easily, typically in machines of simple to medium complexity. Harmony XPS Basic offers the most optimised solution for applications with hardwired safety modules.

Solid State Contactor,SIRIUS SC 1 Pole 20 Amps at 24 VAC to 230 VAC 24 VDC Coil DIN Rail or Panel Mount Screw Terminals 22.5 mm Relay Width 22.5mm Heat Sink Width Short Circuit Resistant Switch UL File E143112 in Vol.1 Sec.8

The SIRIUS Safety Relay Basic Unit Advanced Series is a state-of-the-art relay designed to provide advanced safety features in various applications. This series offers time delay functionality ranging from 0.5 to 30 seconds, ensuring precise control over your system's operations. The relay enabling circuits are equipped with 2 instantaneous no contacts and 2 delayed no contacts, providing versatile options for different operational requirements. This unit operates at a voltage of 24 V DC and features screw terminals for easy installation.The SIRIUS Safety Relay Basic Unit Advanced Series is an ideal choice for applications where safety and reliability are paramount. Its advanced features and robust design make it suitable for a wide range of industrial and automation systems. Whether you need to control power distribution, manage machine operations, or ensure safety in your system, this relay offers the performance and flexibility you require.

The AF65-30-00-13 is a versatile contactor designed to manage large control voltage variations. It features a wide control voltage range of 100-250V 50/60 Hz and DC, making it suitable for unstable networks. This contactor is capable of controlling motors up to 30 kW / 400 V AC (AC-3) or 50 hp / 480 V UL and switching power circuits up to 105 A (AC-1) or 90 A UL general use. It has a block type design, allowing for easy extension with add-on auxiliary contact blocks and a wide range of accessories. Key Features: Wide control voltage range: 100-250V 50/60 Hz and DC Suitable for unstable networks Can control motors up to 30 kW / 400 V AC (AC-3) or 50 hp / 480 V UL Switching power circuits up to 105 A (AC-1) or 90 A UL general use Compact design with built-in surge protection

The SIRIUS advanced safety relay is a high-quality electronic device designed for enabling circuits in various applications. It features three normally open contacts and one normally closed contact, along with a relay signaling circuit. This unit operates at 24V DC and is equipped with a spring-loaded terminal for easy connection.

The Siemens Power Contactor S10 is designed for AC-3 operation, offering a rating of 225A and a power capacity of 110kW at 400V. This contactor features auxiliary contacts with 2 NO + 2 NC, making it suitable for a wide range of applications. It comes with a frame size of S10 and busbar connections for conventional operation. The operating mechanism is spring-loaded, ensuring reliable and efficient performance.

Il relè contattore NF22E-13 100-250V50/60HZ-DC di ABB è progettato per la commutazione efficiente di circuiti ausiliari e di controllo. Dotato di un'interfaccia bobina elettronica, accetta un'ampia gamma di tensioni di controllo da 24 a 500 V 50/60 Hz o da 20 a 500 V c.c., il che lo rende adattabile a varie tensioni di controllo in tutto il mondo senza la necessità di sostituire la bobina. Questo relè è dotato di protezione contro le sovratensioni incorporata, eliminando la necessità di soppressori di sovratensioni aggiuntivi.Caratteristiche principali: Relè contattori a 4 poli con contatti ausiliari collegati meccanicamente conformi all'allegato L della norma IEC 60947-5-1 Circuito dicontrollo azionato da CA o CCAmpio intervallo di tensione di controllo (24-500 V 50/60 Hz o 20-500 V CC)Protezione contro le sovratensioni integrataCompatibile con un'ampia gamma di accessoriApplicazioni:Ideale per la commutazione di circuiti ausiliari e di controllo in varie applicazioni industriali, garantendo prestazioni affidabili e adattabilità a diverse tensioni di controllo a livello globale.

The CM-PAS.41S relay is from the CM three-phase monitors range. This relay operates with a rated control supply voltage / three-phase measuring voltage of 300-500 V AC and has a 2 c/o output with contacts rated at 250 V / 4 A. The CM-PAS.41S monitors the phase parameters phase failure, phase sequence and phase unbalance. An ON-delay is adjustable over a range of instantaneous to 30 s (0, 0.1-30 s). A sealable transparent cover for protection against unauthorized changes is available as accessory. The device offers screw connection technology with double-chamber cage connection terminals.

The AC Power Contactor, model AC-3, is designed to handle high power applications, with a rating of 7.5kW at 400V. This contactor features 2 normally open (NO) and 2 normally closed (NC) contacts, making it suitable for various switching tasks. It operates at 230V AC, 50Hz, with a 3-pole design, ensuring reliable performance in diverse environments.The contactor comes with a removable auxiliary switch, enhancing its versatility. It is available in Size S0, offering flexibility in installation and use. The screw terminal design allows for easy connection of wires, further simplifying the installation process.

The CT-ARE is a single-function electronic time relay from the CT-E timer range. It provides an OFF-delay (true delay on break) function without auxiliary voltage and with a time range from 0.1 s to 10 s. This time relay operates with a rated control supply voltage of 110 - 130 V AC and has a 1 c/o (SPDT) output rated at 250 V / 4 A.

The SE Relays 750R series, plug-in general purpose relay offeres robust and historically proven octal style mounting relay platform that provides excellent structural support with hermetically sealed for wash down conditions cover compliant with UL Class I Division 2 for Hazardous Locations Groups A, B, C, and D. Contacts rated as 12A resistive at 120VAC/240VAC, 1/3hp at 120VAC, 1hp at 277VAC with nominal coil voltage 120VAC , make relay to be an ideal choice for automation panels and controls. Silver alloy contact 3PDT configuration reduces oxidation and increases shelf life, gives simultaneous control of separate circuits. Socket-mounting option simplified installation and maintenance and using of protection modules, hold-down clips, and other accessories. Mechanical standard flag indicator displays the relay status during testing or operation.

Temperature Monitoring Relay SIMIREL Conversion Type= Digital deg. C Number of Sensors = 2 Sensor Type = (Sel-PT100/1000;KTY83/84;NTC) Function = (Sel-Over/Under/Window Monitor) Measurinng Range = -50+750 Control Voltage = 24VUC Spring

The Siemens S6 Contactors are designed for a wide range of applications in the power industry. With a rating of 115A and an operating voltage of 200-220V AC/DC, these contactors can handle high power loads up to 55 kW at 400 V AC (50-60 Hz) / DC operation.The Siemens S6 Contactors feature auxiliary contacts with 2 NO + 2 NC for added functionality and flexibility. These contactors are available in a 3-pole configuration, making them suitable for various applications where multiple phases or circuits need to be controlled.The Siemens S6 Contactors come with box terminals for easy installation and maintenance. The conventional operating mechanism ensures reliable and efficient operation of the contactor, while the screw terminal design allows for quick and secure connection of wires.

The Complete Unit 24VDC Plug-in Relay is designed to provide efficient and reliable control of your electrical systems. This unit features a 3W output at 24V DC, ensuring that it can handle the demands of even the most power-intensive applications.The relay also comes equipped with an LED module in red color. This not only allows for easy identification but also provides a clear visual indication of the relay's status. The LED module is standard and screw terminal, making it easy to install and maintain.This unit is compatible with a standard plug-in socket, which measures 3.5 mm in pinning. This ensures that it can be easily integrated into your existing electrical systems.

Il Siemens SIMATIC DS1-X avviatore diretto per ET 200S è progettato per applicazioni di controllo motori industriali in cui è richiesta un'integrazione compatta e una prestazione di commutazione affidabile. Supporta l'avviamento diretto ed è adatto per applicazioni modulo di controllo del freno, rendendolo una scelta pratica per sistemi di automazione che necessitano di funzioni coordinate di motore e frenata. Il design elettromeccanico espandibile aiuta ad adattare la soluzione ai requisiti della macchina mantenendo un concetto di installazione semplice. Questo avviatore offre protezione da cortocircuito ed è destinato all’uso in ambienti industriali esigenti con alte aspettative EMC. La sua categoria di coordinazione e la costruzione robusta supportano un funzionamento affidabile in armadi di controllo e impianti di automazione distribuita. L’unità è progettata per un’operatività di manutenzione-friendly e prestazioni stabili nei circuiti motore AC, aiutando ingegneri e integratori a implementare soluzioni compatte di avviatori di motore con la qualità Siemens.

Temperature monitoring relay CM-TCS.13S: temperature range 0..+200°C, width 25 mm, adjustable by potentiometer, 1 temperature sensor, 2 thresholds, overtemperature, undertemperature, window monitoring, rated control supply voltage 24-240 V AC / DC, 2 c/o, screw connection terminals

TeSys LRD thermal overload relay, 4A/690V, thermal setting range 2.5-4A, tripping class 10A, for protection of 3-phase motors 1.1-1.5kW@400V. Differential device with phase failure and load unbalance detection. It provides a thermal adjustement dial, a manual-automatic reset selector, a test selector for simulation of a tripping, reset and stop buttons, a flag indicator and 2 auxiliary contacts 1NO+1NC for fault signalling. Settings are protected by a transparent cover lockable by sealing. Connection by screw clamp terminals, it connects directly to the bottom terminals of 3-pole contactors LC1D09-D38. Mounting on DIN rail or screw fixing, separated from the contactor, with use of a terminal block LAD7B106 (to be ordered separately). Multi standards certified (IEC, UL, CSA, CCC, EAC, ATEX, Marine), Green Premium compliant (RoHs/Reach).

The TeSys Giga high power contactor is designed for demanding applications, offering a maximum operating rate of up to 600 cycles per hour and an operating ambient air temperature range from -25°C to 60°C. This compact device measures 255mm x 108mm x 175mm (H x W x D) and is certified under multiple standards, including CE, CB, CCC, cULus, EAC, KC, RCM, and Marine. It also complies with the Green Premium standard for RoHS/Reach. The contactor features a 100-250V AC/DC wide band low consumption electronic coil and an embedded highly reliable 1NO+1NC auxiliary contact block, providing continuous monitoring with healthy and alarm indicators. It also includes a local Contact Wear Diagnosis (CWD) as a standard function. The TeSys Giga high power contactor can be fixed in all quadrants, allowing for maintenance without removing cables/busbars. It is designed to replace the switching module (main contacts), enhancing the contactor's life. The device provides IP2x protection in Front face with shrouds conforming to IEC 60529 and VDE 0106. The contactor can be used with power connection by bolted connection and control connections by spring terminals, accessible from the front for easy and quick replacement. It is also possible to mount the OLR directly below the contactor. The device is Green Premium compliant (RoHS/Reach) and features a unique QR code for quick access to complete product data.