Ricerca prodotti

Auxiliary Contact, 1 NO, Side Mounting, With Sequence Numbering Designations, Screw Terminals, For 100-C Contactors

Bulletin 1756 ControlLogix® I/O modules provide a full range of digital, diagnostic digital, analog, motion control, and specialty I/O to meet your application needs. You can use any of the I/O modules in the local chassis of a ControlLogix controller or in a chassis linked to a ControlLogix controller across ControlNet™ or EtherNet/IP™ networks.

EtherNet 10-100M Interface Module (supports 128 TCP/IP connections)

SIMATIC NET, CP 343-1 LEAN COMMUNICATION PROCESSOR FOR CONNECTING SIMATIC S7-300 TO IND. ETHERNET VIA TCP/IP AND UDP, MULTICAST, SEND/RECEIVE W. AND W/O RFC1006, FETCH/ WRITE, S7-COMMUNICATION(SERVER) PROFINET IO-DEVICE INTEGRATED 2-PORT SWITCH ERTEC 200, BG EXCHANGE W/O PG, SNMP DIAGNOSTICS, INITIALIZ. VIA LAN, 2 X RJ45 CONNECT. FOR LAN WITH 10/100 MBIT/S

Circuit-Breaker, Motor Protection, 1.6 - 2.5A, MxRtg MCPs(no OvPrt)is 1200.0A, Frame Size C, Standard Breaking Capacity, No Bus BarMount, 2.5 A, No Knob Adaptor Modification, for Thermal Overloads, None, None, Std Mgntc Trp (Fxd at 13 x le), None, None, None, TriggerConstraints, None, No Options Right

COMMUNICATION MODULE CM 1243-5 FOR CONNECTION OF SIMATIC S7-1200 TO PROFIBUS AS DP MASTER MODULE; PG/OP COMMUNICATION; S7-COMMUNICATION

SITOP PSU200M 10 A STABILIZED POWER SUPPLY INPUT: 120/230-500 V AC OUTPUT: 24 V/10 A DC

Communication Module, ControlLogix, ControlNet, 64 Connection, Redundant Coaxial Media, 2 ControlNet BNC Connectors

SIMATIC S7-300, ANALOG INPUT SM 331, OPTICALLY ISOLATED, 8AI, RESOLUTION 9/12/14 BITS, U/I/THERMOCOUPLE/RESISTANCE INTERRUPT, DIAGNOSTICS; 1X20PIN REMOVE/INSERT W. BACKPLANE BUS

Communication Card, ControlNet, Peripheral Component Interconnect (PCI) Bus PC, 2 Channel, 2 ControlNet BNC Connectors, MessagingCapability

SIMATIC S7-300, ANALOG INPUT SM 331, OPTICALLY ISOLATATED, 8 AI THERMOCOUPLE, TYPE B, E, J, K, L, N, R, S, T TXK/TXK(L) ACCORDING GOST 16 BIT, 50 MS, 40 PIN

SIMATIC s7-1200, analog output, sm 1232, 4 ao, +/-10V, 14 bit resolution, or 0 - 20 ma/4 - 20 ma, 13 bit resolution

SIMATIC dp, 5 electron. modules for et 200s, 4 do standard DC 24v/0.5a, 15 mm width, 5 pieces per packaging unit

Communication Module, CompactLogix, Ethernet/IP, 1 Port, 0 Motion Axes, 64 TCP/IP Connections, 128 CIP Connections, 1 RJ45 Copper

SIMATIC dp, electronic module for et 200s, 2/4 ai rtd standard, 15 mm wide, 15bit + sign pt100 std pt100 kl ni100 std ni100 kl 150 ohm 300 ohm 600 ohm, cycle time 110 ms/channel with led sf (group fault)

Bulletin 1746 SLC™ I/O provides a full range of digital, analog, and specialty I/O for a wide variety of applications. You can use the I/O modules in a local I/O chassis of an SLC 500 controller. Or, use an I/O communication adapter module to place I/O in a chassis at a location remote from the controller.

Communication Module, ControlLogix, Ethernet/IP, 1 Port, 0 Motion Axes, 64 TCP/IP Connections, 128 CIP Connections, RJ45 Copper

Expansion module - Switched Ethernet PROFINET V3, plug-in, for 7KM PAC32x0 / 4200 / 3VA COM100/ 800

Repeater Adaptor, ControlNet, Communication Module, 24V DC, Coaxial BNC, Single Connector, DIN Rail Mounting