Quadri elettrici e alimentazione

The 3VA22 4P circuit breaker is designed for low voltage applications, featuring a high breaking capacity of 150kA at 415V and 24kA at 690V. This device is equipped with an ETU560 electronic trip…

Harmony 22 mm modular push buttons, selector switches, pilot lights are designed for industry. This range combines simplicity of setup, flexibility and a robust construction. An ingenious locking…

The Phoenix Contact ELR 1-SC-24DC/600AC-50 is a single-phase solid-state contactor designed for reliable and efficient electrical control. With an input voltage of 24 V DC, this contactor provides a…

Phoenix Contact's CBM E4 24DC/0.5-10A NO-R is a multi-channel electronic circuit breaker designed to protect four loads at 24 V DC from overload and short circuit conditions. Key Features: Active…

The Multi9 C60BPR miniature circuit breaker (MCB) is designed for low voltage applications, featuring a dual pole (2P) configuration with a rated current of 20A and a D curve for tripping…

The plug-in relay operates with a control voltage of 12V DC and is designed with one changeover contact, providing a rating of 16A. This relay is suitable for various applications where space…

The Male Crimp Termination Inserts are made from Polycarbonate (PC) material, featuring a pebble grey finish. These inserts are rated to handle up to 16 Amperes of current and are designed to…

The 3VA24 4P circuit breaker is designed for low voltage applications, featuring an electronic trip unit. It is built on the 3VA24 frame and offers a very high breaking capacity classified as Class…

The 3VA21 circuit breaker is a low voltage molded case design that adheres to IEC standards. It operates with a rated permanent current of 100A and is constructed with a 4-pole configuration. This…

The 3VA21 circuit breaker is an IEC molded case circuit breaker with an electronic trip unit, specifically model ETU860, which supports line protection. It is rated for 100A and features a high…

SUPPLEMENTARY PROTECTOR,4P,32A,CURVE C Supplementary Protector, UL1077 Rated, IEC Mini Circuit Breaker, 4 Pole, 32 Amps, 480 VAC, Trip Characteristic Curve C, 72mm Width,70mm Depth, UL File E116386…

The vacuum contactor, with a frame size of S10, features a rated operational current of 265 amperes and supports AC-3 power ratings of up to 132 kilowatts at 400 volts. It incorporates 3-pole…

TRANSFORMER SITAS; PHASES:1; PN/PN(S6)(KVA):0,5 /2; UPRI(V):230+/-5%; USEC(V):24; ISEC(A):20,8; F(HZ):50...60; VECTOR GR./SHIELD WNG.:II0 /0; TA/ISOKL:40 /B; IP00; TYPE OF TERMINALS:SCREW/TAB…

The Altivar 212 variable speed drive is a robust solution for feeding 3-phase asynchronous motors. With an IP21 protection index and built-in EMC filter, it ensures reliable operation and adherence…

This ABL8 regulated switch mode power supply (SMPS) supplies direct current voltage. It has a rated input of 100V to 500V AC, a rated output current of 3A at 24V DC and a rated power output of 72W…

This pre-assembled relay module, designated by the code RIF-1-RPT-LDP-12DC/1X21 , incorporates a relay base, a power contact relay, a plug-in display/interference suppression module, and a retaining…

The relay module, designated as RIF-1-RSC-LV-24AC/1X21 , is engineered for 24 V AC applications. It features a monostable design with a single changeover contact. This assembly includes a relay base…

The NFC cartridge fuse is specifically intended for use in TeSys GS switch-disconnector devices. This gG fuse-link is engineered to safeguard against both thermal overloads and magnetic overcurrents…

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in…

This interface plug-in relay operates at a control voltage of 24V DC and is rated for a maximum switching capacity of 2500 VA AC and 300 W DC. It features a single contact configuration (1 CO) and is…