Sensori di automazione

The Turck NI50U-CK40-AP6X2-H1141 W/BS4 Inductive Sensor is designed for enhanced switching distances, with a rated switching distance of up to 50 mm. This non-flush sensor features a rectangular design and a height of 40 mm. Its active face can be oriented in five different directions, making it versatile for various applications. Constructed from PBT-GF30-V0 plastic, this sensor boasts high luminance corner LEDs for optimal viewing of the supply voltage and switching state from any position. It is compatible with all metals and offers increased switching distance. With a protection class of IP68, it is resistant to magnetic fields. The sensor features auto-compensation to protect against pre-damping, making it partially embeddable. It operates on DC 3-wire at voltages between 10 and 30 VDC, providing a NO contact with a PNP output. The M12 x 1 male connector ensures easy integration into your system.

Contrast sensors are high-resolution diffuse sensors that distinguish objects based on their gray values. Balluff's rugged contrast sensors recognize even small differences in contrast, have a high switching frequency up to 30 kHz and are therefore particularly fast. They enable high positioning precision and are appropriate for a variety of applications, for example, in the printing and packaging industry.

Our standard inductive sensors are ideal for object detection in metal areas. They are short-circuit protected and operate without contact, making them wear-free and very resistant to dirt and contamination. The sensors are available in configurations from 3 mm Ø to 80 × 80 mm square dimensions. The rugged and reliable inductive Global Sensors provide especially economical solutions. We can also delivery the broad range of these over 500 preferred types worldwide in the shortest possible time.

SMC offers a variety of auto switches for actuators and air grippers. Reed and solid state switches are available in a general purpose type or with 2-color indication, which allows the optimum operating position to be determined by the color of the light. Solid state switches are also available in 2-color indication with diagnostic output, water resistant 2-color indication, built-in OFF-delay timer (200 ms), magnetic field resistant, heat resistant and wide range detection configurations. Various lead wire lengths are available.

SMC offers a variety of auto switches for actuators and air grippers. Reed and solid state switches are available in a general purpose type or with 2-color indication, which allows the optimum operating position to be determined by the color of the light. Solid state switches are also available in 2-color indication with diagnostic output, water resistant 2-color indication, built-in OFF-delay timer (200 ms), magnetic field resistant, heat resistant and wide range detection configurations. Various lead wire lengths are available.

The BI2-M12-AP6X Inductive Sensor is a high-quality inductive sensor designed for precise and reliable operation. It boasts a rated switching distance of just 2 mm, ensuring accurate detection even in close proximity to the target object. The cable length (L) is 2 meters, providing flexibility in installation. The sensor features a M12 × 1 threaded barrel, constructed from durable chrome-plated brass for enhanced durability and resistance to corrosion. It operates on DC 3-wire, with a voltage range of 10…30 VDC, ensuring compatibility with a wide range of systems. The BI2-M12-AP6X Inductive Sensor is equipped with NO contact and PNP output, providing versatile integration options. The cable connection ensures reliable data transmission, enhancing the overall performance of your automation system.

The Turck BI2-M12-VP6X-H1141 Inductive Sensor is a high-quality, reliable solution designed for industrial applications. It features a flush design with an M12 × 1 threaded barrel and a chrome-plated brass construction. This sensor operates on DC power, with a voltage range of 10 to 30 VDC. The output is a changeover contact in PNP configuration. The sensor has a rated switching distance of 2 mm and comes with a male M12 x 1 connector for easy installation. It is ideal for applications that require precise, non-contact detection capabilities. With its robust design and advanced technology, the Turck BI2-M12-VP6X-H1141 Inductive Sensor provides reliable performance in a wide range of industrial environments.

The Inductive Sensor BI2-EG08K-AP6X is designed to provide enhanced switching distance, rated at 2 mm. This sensor features a cable length of 2 m and comes with a flush design, M8 × 1 threaded tube made from stainless steel 1.4305 (AISI 303). It offers a large sensing range and is compatible with DC 3-wire at 10…30 VDC, providing NO contact and PNP output.The sensor is equipped with a cable connection for easy installation. Its robust design ensures reliable performance in demanding industrial environments. The BI2-EG08K-AP6X Inductive Sensor is an ideal choice for applications requiring increased switching distance and enhanced sensing capabilities.

The Turck BI5U-Q08-AP6X2-V1131 Inductive Sensor is a high-performance, robust sensor designed for industrial applications. It features a flush rectangular design with a height of 8 mm and an active face on top. Constructed from metal, specifically Zamak, and nickel-plated, it offers excellent resistance to magnetic fields and operates within an extended temperature range. The sensor has a high switching frequency, with DC 3-wire connectivity, providing a PNP output of 10…30 VDC. It is rated for a switching distance of 5 mm and provides NO contact. This sensor is protected by class IP68 and is compatible with all metals.

The Turck Inductive Sensor Model H1141 is a high-quality sensor designed for industrial automation. It features a rated switching distance of 5 mm, making it ideal for precise object detection. The flush design and threaded barrel with an M18 x 1 connection ensure easy installation. Constructed from stainless steel (1.4301), this sensor is both durable and corrosion-resistant. It operates on a DC 2-wire system, providing nominal voltage of 8.2 VDC. The sensor adheres to the DIN EN 60947-5-6 (NAMUR) standard for output, and it comes with an M12 x 1 male connector. It is certified for ATEX category II 1 G, Ex zone 0, and ATEX category II 1 D, Ex zone 20, ensuring compliance with safety regulations. The sensor also meets the SIL2 (Low Demand Mode) requirements according to IEC 61508, PL c according to ISO 13849-1 at HFT0. For applications requiring higher safety levels, the sensor can be configured in a redundant setup, meeting the SIL3 (All Demand Mode) requirements according to IEC 61508 and PL e according to ISO 13849-1 with HFT1. This makes it suitable for a wide range of industrial automation applications where safety is paramount.

The Turck BI2-EG08-AP6X Inductive Sensor is designed to provide an enhanced switching distance of 2 mm. This sensor features a cable length (L) of 2 meters and is constructed with a flush M8 × 1 threaded tube made from stainless steel, grade 1.4305 (AISI 303). Its large sensing range allows for versatile applications, while the DC 3-wire design supports voltage inputs ranging from 10 to 30 VDC.The sensor operates with a NO contact and provides a PNP output. It is equipped with a cable connection for easy integration into various systems. This Turck BI2-EG08-AP6X Inductive Sensor is ideal for applications requiring increased switching distance and reliable performance.

Capacitive Sensor, Rated switching distance 15 mm, Flush, M30 × 1.5 threaded barrel, Plastic, ABS, Fine adjustment via potentiometer, DC 4-wire, 10…65 VDC, Complementary contact, PNP output, Terminal chamber

The Turck BI2-EH6.5-AP6X-V1131 Inductive Sensor is designed with a flush, smooth barrel of Ø 6.5 mm and crafted from stainless steel, specifically 1.4305 (AISI 303). This sensor boasts a large sensing range, making it ideal for various applications. The BI2-EH6.5-AP6X-V1131 Inductive Sensor operates with DC 3-wire at a voltage range of 10…30 VDC, providing NO contact and PNP output. It comes equipped with an M8 x 1 male connector for easy integration.

Inductive Sensor, Rated switching distance 2 mm, Cable length (L) 2 m, Flush, Threaded barrel, M12 x 1, Chrome-plated brass, DC 2-wire, nom. 8.2 VDC, Output acc. to DIN EN 60947-5-6 (NAMUR), Cable connection, ATEX category II 1 G, Ex zone 0, ATEX category II 1 D, Ex zone 20, SIL2 (Low Demand Mode) acc. to IEC 61508, PL c acc. to ISO 13849-1 at HFT0, SIL3 (All Demand Mode) acc. to IEC 61508, PL e acc. to ISO 13849-1 with redundant configuration HFT1

Inductive Sensor, With Analog Output, Measuring range 2 mm, Max. measuring range 4 mm, Cable length (L) 2 m, Flush, Threaded barrel, M18 x 1, Chrome-plated brass, 4‐wire, 15…30 VDC, Analog output, 0…10 V and 0…20 mA, Cable connection

Inductive Sensor, For the Food Industry, Rated switching distance 4 mm, Flush, Threaded barrel, M12 x 1, Stainless steel, 1.4404, Front cap made of liquid crystal polymer, Factor 1 for all metals, Resistant to magnetic fields, For temperatures of -40 °C…+100 °C, High protection class IP69K for harsh environments, Special double-lip seal, Protection against all common acidic and alkaline cleaning agents, Laser engraved label, permanently legible, DC 3-wire, 10…30 VDC, NO contact, PNP output, M12 x 1 male connector

The Schneider Electric HC-201 Humidity Stat Duct is engineered to provide precise humidity control in duct systems. Ideal for a variety of HVAC applications, this humidistat ensures optimal environmental conditions by maintaining humidity levels between 15% and 95%. The device operates on 24/120/240 VAC and features a SPDT switch for versatile control options. Constructed from durable beige plastic, the HC-201 is housed in a NEMA 1 enclosure, making it suitable for indoor use. The compact design, with an overall depth of 3 1/2 inches, height of 4 3/4 inches, and width of 6 1/2 inches, allows for easy installation in various duct configurations. This product is CSA and UL listed, ensuring compliance with industry standards for safety and performance.Applications: The Schneider Electric HC-201 is perfect for commercial and industrial HVAC systems where precise humidity control is essential to maintain air quality and comfort.

Trimmer auto switches can detect various size work pieces by the difference of more than 0.5mm. The sensor enclosure is rated IP67 and the amplifier is IP40. Trimmer switches are available in direct or rail mounting styles. The sensor and amplifier can be connected without restriction through the use of an e-con connector.

The Keyence CZ-V22AP is a high-performance Amplifier Unit designed as an Expansion Unit with PNP output. It offers exceptional control and integration capabilities, making it ideal for various industrial automation applications. The unit supports multiple response times, including 200 µs (HIGH SPEED), 1 ms (FINE), 4 ms (TURBO), and 8 ms (SUPER), ensuring precise and adaptable performance.Featuring a robust PNP open-collector output with 4 channels, the CZ-V22AP can handle up to 30 VDC and 100 mA per output, with a total of 200 mA across all outputs. The unit is equipped with essential protection circuits, including reverse-polarity protection, overcurrent protection, and a surge absorber, ensuring reliable operation in demanding environments.The CZ-V22AP supports external tuning input, external bank switch input, and external shift input, with an input time of 20 ms minimum. Its versatile timer function offers OFF-delay, ON-delay, and one-shot modes, with adjustable timer times ranging from 1 to 1000 ms for each bank.Designed for scalability, the unit allows expansion up to 3 additional units, providing flexibility for complex systems. The unit's environmental resistance includes an ambient temperature range of -10 to +55 °C and vibration resistance of 10 to 55 Hz, double amplitude 1.5 mm, for 2 hours in each axis.Constructed with durable polycarbonate housing and cover, the CZ-V22AP ensures long-lasting performance. It comes with two end units and weighs approximately 100 g. The unit is compliant with CE Marking and UL Recognition standards, ensuring adherence to international safety and quality regulations.

The Keyence CZ-12 Reflective Sensor Head is designed for high-precision detection applications. Featuring an area beam spot, this sensor head ensures accurate detection within a range of 5 to 20 mm (0.20" to 0.79"). The reflective sensor is built to withstand harsh environments with an ambient temperature range of -40 to +70 °C (-40 to 158 °F) and relative humidity of 35 to 85% RH. The sensor head is constructed with a durable plastic (polyethylene sheathed) fiber and a polysulfone case, ensuring long-lasting performance.The CZ-12 is equipped with a 2-meter (6.6') free-cut cable, providing flexibility in installation. Its allowable bending radius of R25 mm (0.98") makes it suitable for various industrial applications. This sensor head is ideal for use in automation systems where precise and reliable detection is critical.Applications: The Keyence CZ-12 is perfect for use in manufacturing lines, quality control systems, and automated inspection processes where precise detection of objects within a specified range is required.