Utensili e accessori

TeSys GV accessory, combination block for motor starter assembly. For the connection between a motor circuit breaker GV2 or a fuse carrier LS1D32 and contactor LC1D09-D38. To be used when the assembly is mounted directly on DIN rails. Sold in lots of 10 units. Green Premium compliant (RoHS/REACh).

The MLA Automotive Series utilizes advanced multilayer fabrication technology for transient voltage surge suppression. These devices effectively mitigate various transient events, adhering to standards such as IEC 61000-4-2, integral for ensuring Electromagnetic Compliance (EMC). Typically employed to protect integrated circuits and other components within circuit boards, this series supports a broad range of applications across power supply, control, and signal lines. Manufactured from semiconducting ceramics, the devices feature a leadless, surface mount package that is compatible with contemporary reflow and wave soldering processes. Notably, the MLA Automotive Series operates over a wider temperature range compared to traditional Zener diodes and occupies a significantly smaller footprint than plastic-housed alternatives. Its specifications include a maximum rated DC voltage of 18V, a maximum clamp voltage of 50V, and a typical capacitance of 120pF, making it suitable for diverse applications.

The M23 device connector front mounting, designated as M23-7ES198AA600S, is designed for versatile applications with an angled rotatable configuration. It supports a total of eight positions, configured as 4+3+PE, utilizing a socket type connection with crimp capability. The flange dimensions measure 28 mm x 28 mm, making it suitable for various mounting scenarios.Manufactured in Germany, this connector is part of the M23 PRO product family and is constructed from durable materials, including a PA 6.6 insulating body and a GD-Zn housing. It offers a high degree of protection rated at IP66/IP68 (2 m / 24 h) and IP69K, ensuring reliability in challenging environments.The operational temperature range extends from -40 °C to 105 °C, with a permanent temperature rating of 125 °C according to DIN EN 60512-9-2 for 1000 hours. The connector is rated for a maximum current of 30 A and a voltage of 630 V for the primary contact group, and 9 A at 250 V for the secondary contact group.For installation, the connector features a front mounting design with a square flange and requires specific crimp contacts, which must be ordered separately. It is essential to observe the derating curve during operation and adhere to the safety note that warns against connecting or disconnecting under load.

The marked legend features dimensions of 30 x 40mm and is designed with a black klaxon symbol on a white background, suitable for vertical mounting. It is an accessory intended for use with the Harmony XAC pendant control stations, compatible with both power circuit and control circuit applications. Conforming to NF E 52-124 standards, this marking accessory serves as a clear indicator for users. The product weight is 0.001 kg, and it is provided in a package containing one unit. The item is manufactured in the Czech Republic.

The light block designed for Harmony XB4 and XB5 series features a white integral LED and operates at a rated supply voltage of 24V, compatible with both AC and DC systems. This component facilitates straightforward installation and replacement on illuminated push-button or selector switch units using a clip assembly and screw-clamp connections.With an IP20 protection rating, it ensures safety from accidental contact with live circuits, while its operational temperature range of -40°C to 70°C allows for versatile application in various environments. The device is capable of delivering a service life of up to 100,000 hours under rated conditions at 25°C.This model, known by its device short name ZBV, is designed for steady signaling and employs a protected LED as its light source. It is compliant with multiple standards including CSA C22.2 No 14 and UL 508, ensuring reliability and performance in industrial settings.

Thalassa TBP industrial PC box with opaque PC cover H40. Int is 225 x 175 x 120 mm. Ext is 241 x 194 x 127 mm. Wall mounted enclosure. High plain cover. Outside sealed is flat screwdriver captive screw lock. Certifications is DEMKO, SEMKO, TÜV, UL. UL 508 A Standard. Fire resistance 960°. Polycarbonate made. IP66 (NEMA 4.4X), IK08, Grey RAL 7035, Insulation Class II. Set of 5. Ambient temperature for storage/operation is (-15 to 60 °C)/(-25 to 80 °C).

The feed-through connector, designated as DFK-PC 16/ 8-ST-10,16, is designed for robust electrical interconnections. It has a nominal current rating of 76 A and supports a rated voltage of 1000 V (III/2). The connector's contact surface is made of silver, ensuring reliable conductivity.With 8 potentials organized in a single row, it accommodates a pitch of 10.16 mm. The screw connection method, featuring a tension sleeve, allows for secure attachment while maintaining a conductor to PCB connection direction of 0 °. The plug-in system is compliant with COMBICON PC 16 standards.Additional specifications include a width of 100.72 mm, height of 30.55 mm, and length of 56.5 mm. The housing is colored green and constructed from PA insulating material, providing a flammability rating of V0 and a glow wire ignition temperature of 775 °C.This connector is suitable for use in various applications that require reliable electrical connections while adhering to IEC 61984 standards.

The NH fuse-link system is categorized as a plug-in fuse system, comprising a fuse-base, which may include terminal covers and phase barriers, along with a fuse-link equipped with blade contacts and a replacement device (LV HRC fuse puller). Due to the system's design, interchangeability of rated current cannot be assured, and handling should be performed by qualified professionals.These aM NH fuse-links offer partial-range breaking capacity, making them suitable for protecting motor circuits due to their strong current-limiting characteristics and minimal power losses. They can interrupt currents from 6.3 times the rated current up to their maximum breaking capacity, making them ideal for short-circuit protection. It is essential to pair them with additional switchgear to guard against overloads. The rated current of these fuse-links can match the nominal current of the motor.

This PCB plug-in connector is designed with a male header and supports a 5.08 mm pitch, accommodating 10 poles at a 90° angle. The solder connection is through-hole (THT), with a solder pin length of 3.2 mm. The component is manufactured in orange and packaged in a box. Rated according to various standards, the connector supports a voltage of up to 300 V and a current rating of 18.5 A under specific conditions. Its construction includes insulating material made from PA GF, providing a Comparative Tracking Index (CTI) of ≥ 550 and a UL 94 flammability rating of V-0. The connector operates effectively within a temperature range of -50 °C to 100 °C. For further compliance, the connector is tested to IEC standards and has achieved approvals including cURus and EAC. It features a net weight of 3.63 g and dimensions of 50.8 mm in width, 11.7 mm in height, and 12 mm in depth, ensuring compatibility with various PCB designs. The product family belongs to the OMNIMATE Signal series and is suitable for THT solder connections. With a maximum plugging force of 10 N and a maximum pulling force of 7.5 N per pole, this connector is designed for reliable performance in demanding applications.

The UCT-WMCO 2,9 (12X4) YE conductor marking sheet is designed for efficient wire labeling in various applications. This product features a yellow color (RAL 1018) and provides an unlabeled surface suitable for customization using advanced identification technologies such as TOPMARK NEO, TOPMARK LASER, BLUEMARK ID COLOR, and others.Constructed to accommodate cable diameters from 2 mm to 2.9 mm, it offers a lettering field dimension of 12 mm in length and 4 mm in width. This marking sheet contains 32 individual labels, organized in rows of 8 for practical use.In adherence to industry standards, the product is wipe-resistant according to DIN EN 61010-1 and has a flammability rating of UL 94 V0. It operates effectively within an ambient temperature range of -40 °C to 120 °C, and it is recommended to store it at 23 °C with 50% relative humidity to maintain quality.This conductor marking sheet is compliant with DIN EN 45545-2 fire protection regulations for rail vehicles, ensuring safety across applications. It is free from silicone, halogen, and cadmium, making it a suitable choice for environmentally conscious projects.

The D-SUB contact insert, designated as CUC-DSI-Y1STZ-A/DSLSA15:50, is specifically constructed for PCB mounting applications. This model is characterized by its socket-type contact configuration and includes 15 signal contacts. The insert is designed for angled installation and is secured using 4-40 UNC threads along with solder pins, compatible with the VS-15-... panel mounting frame.Manufactured in Germany, this component adheres to the overvoltage category III, with a rated voltage of 125 V and a rated current of 5 A. The product's dimensions are 39.3 mm in width, 17.3 mm in height, and 21.6 mm in length. Its housing is made of metal, while the contacts are composed of a copper alloy with a hard gold plating over nickel, ensuring reliable connectivity. The contact carrier is made from polyester GF, and the component meets the flammability rating of V0 according to UL 94.

The Device Connector Front Mounting, designated with the code ST-7ES1N8AWQ00S, is designed for standard and SPEEDCON interlock applications. It features a straight configuration with a total of 8 positions, including 7+PE, and employs a crimp connection method.The connector is shielded and utilizes a flange with dimensions of 21.6 mm x 21.6 mm, ensuring a secure fit. With an IP67 degree of protection, it is suitable for various environmental conditions, allowing operation in temperatures ranging from -40 °C to 125 °C. The housing is constructed from GD-Zn, while the rotating parts are made of CuZn, and the insulating body is comprised of PA 6.6.Notable specifications include a nominal current of 14 A and a nominal voltage of 630 V, with an overvoltage category of III and a rated surge voltage of 6 kV. It is important to note that connectors should not be plugged in or disconnected under load to prevent damage.

The EH 22,5 F-C SS/ABS GY7035 serves as the upper component of a DIN rail housing, characterized by its flat design and a single connection opening on one side. With precise dimensions of 22.6 mm in width, 75.26 mm in height, and 36.95 mm in depth, this housing is finished in light grey (RAL 7035).Manufactured from ABS material, it complies with the flammability rating of HB as per UL 94 standards. It offers a maximum of 4 positions with a pitch of either 5 mm or 5.08 mm. The housing’s design includes ventilation openings and is suitable for various temperature ranges, supporting operational conditions from -40 °C to 80 °C.In terms of assembly, it utilizes a snap-in mounting type and can accommodate PCBs through a slot configuration. The product is packed in cardboard, with the outer packaging in carton form, ensuring safe transport and storage. The ambient temperature for storage and transport is maintained between -40 °C and 55 °C, while relative humidity can reach up to 95%.

This socket integrates a pin connector pattern of type CF with a push-in spring connection, accommodating conductor cross-sections from 0.2 mm² to 4 mm² for solid conductors and 0.2 mm² to 2.5 mm² for flexible conductors. It is suited for mounting on a DIN rail in service interfaces or for direct mounting applications. The operating temperature range is between -20 °C and 60 °C, ensuring reliable performance under various environmental conditions.Compliance with VDE 0620-1 underscores its adherence to established standards, while its flammability rating of V0 according to UL 94 indicates a high level of fire resistance. This product also meets environmental compliance standards, including China RoHS, allowing for an unlimited environmentally friendly use period.

The integrated drive ILA is designed for motion control applications and operates with a 6-pole AC synchronous servo motor. It utilizes an EtherNet/IP communication interface for seamless integration. This model supports a rated supply voltage range of 24V to 48V DC, with a peak current consumption of 8500 mA and a nominal speed of 3400 RPM at 48V. Such specifications enable high-speed rotation and medium torque, ideal for various industrial sectors including printing, packaging, and electronics manufacturing. Measuring 207.8 mm in length and 57 mm in width, the drive has an IP41 rating for the shaft bushing and IP54 for the entire unit, ensuring adequate protection against dust and water. It includes an industrial connector for reliable electrical connections and has a weight of 1.7 kg. The product features a multiturn encoder with a resolution of 16384 points per turn and 4096 turns, facilitating precise motion control. Compliance with multiple standards such as EN/IEC 61800-3 and IEC 60072-1 ensures its reliability and safety in operational environments. The drive supports various operating modes that can be configured via the communication bus, including electronic gearbox and speed profile modes. The product is rated for operation in ambient temperatures up to 55 °C without derating and can withstand shock resistance of up to 150 m/s². The ILA integrated drive combines motor, positioning controller, power electronics, fieldbus, and safety functions within a single device, enhancing the efficiency of decentralized motion solutions.

The LS-EMLP-AL (60X15) BK device marker is constructed from aluminum, featuring a black unlabeled surface that can be customized with TOPMARK NEO or TOPMARK LASER. The adhesive mounting type allows for versatile installation, and it provides a lettering field dimension of 60 x 15 mm. This marker includes a total of 16 individual labels, ensuring ample supply for various applications.With dimensions of 59.7 mm in width and 14.8 mm in height, this marker meets stringent wipe resistance standards as per DIN EN 61010-1 (VDE 0411-1). It is designed to operate effectively in ambient temperatures ranging from -25 °C to 70 °C and is recommended for storage at 23 °C with 50% relative humidity. The adhesive strength is rated at 250 µm with a foil thickness of 800 µm, ensuring durability and reliability in various environments.The marker is compliant with ISO 20653:2013-02 specifications and has been tested for resistance against multiple solvents and conditions, including isopropanol and ethanol, demonstrating its robustness under various exposure scenarios.

This product comprises a set of 10 symmetrical DIN rails, each measuring 400mm in length, specifically designed for installation in PanelSeT SBM enclosures. The rails are manufactured from zinc-coated steel with a thickness of 1mm, providing durability and resistance to corrosion. With a nominal width of 385mm and fixing centers width of 364mm, these rails ensure compatibility with various mounting requirements. The dimensions include a depth of 7.5mm and a height of 35mm, making them suitable for multi-purpose applications. The net weight of a single rail is 0.13kg. This product is classified under the green premium status, indicating minimal use of hazardous substances, and complies with RoHS regulations, ensuring environmental safety. The rails are fixed in place using Ø5mm self-tapping screws at the rear of the enclosure, allowing for secure and reliable installation.

The Panel Feed-Through ST-8EP1N8ACK04S is designed for robust applications, featuring a straight layout and SPEEDCON locking. It supports a connection profile of 5+3+PE, utilizing a pin-type contact method. The flange dimensions measure 25.75 mm x 25.75 mm, ensuring compatibility with standard mounting requirements.This component is shielded and offers a degree of protection rated at IP67, making it suitable for environments exposed to dust and moisture. The cable diameter range of 9 mm to 11 mm allows for versatile installations, while the crimp connection method ensures reliable electrical performance.Further specifications include a nominal current rating of 3.6 A and a nominal voltage of 60 V, with an overvoltage category of III. The rated surge voltage is 1.5 kV, providing additional safety in demanding applications. With an ambient operating temperature range of -40 °C to 125 °C, this panel feed-through can function effectively in extreme conditions up to an altitude of 2000 m.

The ZCMD limit switch body is engineered for robust performance in industrial environments, encompassing applications such as packaging, materials handling, and food and beverage processing. It incorporates 2 NC and 2 NO contacts with a snap action mechanism, ensuring positive opening for enhanced safety in machine design.Manufactured from Zamak, this fixed body unit measures 30mm in width, 16mm in depth, and 50mm in height, with a total weight of 0.065kg. The device is equipped with a 10 m fixed cable for reliable electrical connection. It operates effectively with a rated current of 1.5A at 240V AC and 0.1A at 250V DC, boasting a contact insulation form designated as Zb.Designed according to IEC standards, the ZCMD limit switch is compatible with the XC Standard range and can be paired with associated heads such as ZCE67, ZCE08, and ZCE29, among others. It ensures longevity with an electrical durability rating of up to 5 million cycles under various DC conditions. This product also complies with multiple safety standards, including EN 50047 and EN 50041.

The Type 2 surge arrester VAL-SEC-T2-2+0-120DC-FM is engineered for integration into DC power systems, complying with IEC test classification II and EN type T2. It features a two-section DIN rail module with a width of 25.4 mm, allowing for efficient installation and space management.With an operational voltage range of 100 V DC to 120 V DC, this device supports a nominal discharge current of 20 kA and a maximum discharge current of 40 kA, ensuring reliable protection against overvoltage events. The surge protection is indicated optically, and it is also equipped with a remote fault indicator contact for enhanced monitoring capabilities.This arrester's design includes a robust housing made from PA 6.6-FR 20% GF, providing a flammability rating of V-0 and a high CTI value of 600. Its operational temperature range extends from -40 °C to 80 °C, making it suitable for a variety of environmental conditions. The surge arrester is also rated for an altitude of up to 6000 m above sea level.Compliance with EN 61643-11 standards ensures its reliability and effectiveness in surge protection applications.