Bosch Rexroth Ricambi per Automazione Industriale

Glide profile - Sliding door profile Al 45 - Aluminum profile as a supporting construction element - Installation using inner brackets between two vertical struts - Slide profile to edge the upper part of the sliding door - Insertion profile acts as a slide surface - For surface elements 8 mm thick - Insertion of the surface element into closed frame - Cap - As a design element and to prevent injuries - End piece - For use as a stop for sliding elements - Clamping with setscrew in the profile slot

TASS EXCHANGE PART TR4 INTERNAL TORX T60 The TASS exchange part is the interface between the TASS element and the tightening spindle drive. - Exchange part for a maximum M3 torque of 200 Nm - Many different drives available for exchange parts - Please contact us if you cannot find the drive for your application - The TASS exchange part must be selected to match the size of the TASS element

TASS EXCHANGE PART TR3 INTERNAL TORX T50 The TASS exchange part is the interface between the TASS element and the tightening spindle drive. - Exchange part for a maximum M3 torque of 125 Nm - Many different drives available for exchange parts - Please contact us if you cannot find the drive for your application - The TASS exchange part must be selected to match the size of the TASS element

TASS EXCHANGE PART TR4 EXTERNAL HEXAGON SW18 The TASS exchange part is the interface between the TASS element and the tightening spindle drive. - Exchange part for a maximum M3 torque of 200 Nm - Many different drives available for exchange parts - Please contact us if you cannot find the drive for your application - The TASS exchange part must be selected to match the size of the TASS element

TASS EXCHANGE PART TR4 EXTERNAL TORX E18 The TASS exchange part is the interface between the TASS element and the tightening spindle drive. - Exchange part for a maximum M3 torque of 325 Nm - Many different drives available for exchange parts - Please contact us if you cannot find the drive for your application - The TASS exchange part must be selected to match the size of the TASS element

TASS EXCHANGE PART TR4 EXTERNAL TORX E14 The TASS exchange part is the interface between the TASS element and the tightening spindle drive. - Exchange part for a maximum M3 torque of 200 Nm - Many different drives available for exchange parts - Please contact us if you cannot find the drive for your application - The TASS exchange part must be selected to match the size of the TASS element

SH 2/SF Switch Bracket - For fastening a sensor with special flat design - Installation in the upper groove on the side of a conveyor section - Notice: Not suitable for use in heavy duty profiles and sections with a profile width of 50 mm, for example ST 2/C-H, ST 2/R-H, BS 2/R-H, BS 2/C-H - The switch bracket can be used to fix a sensor in special flat form in place for lateral sensing of the workpiece pallet position

TASS EXCHANGE PART TR4 INTERNAL TORX T70 The TASS exchange part is the interface between the TASS element and the tightening spindle drive. - Exchange part for a maximum M3 torque of 325 Nm - Many different drives available for exchange parts - Please contact us if you cannot find the drive for your application - The TASS exchange part must be selected to match the size of the TASS element

Carrying plate WT 2, ST 4.8 160/160 - For self-assembly of workpiece pallets for product support - Completely drilled and ready for assembly - 15 standard sizes in steel, 4.8 mm thick, with KTL (cataphoretic primer) coating - 10 standard sizes in aluminum, 8 mm thick - 13 standard sizes in aluminum, 12.7 mm thick - You will find drilling plans for identification and data storage systems in the RFID systems catalog - Can be combined with frame modules of WT 2 workpiece pallets

Carrying plate WT 2, ST 4.8 400/480 - For self-assembly of workpiece pallets for product support - Completely drilled and ready for assembly - 15 standard sizes in steel, 4.8 mm thick, with KTL (cataphoretic primer) coating - 10 standard sizes in aluminum, 8 mm thick - 13 standard sizes in aluminum, 12.7 mm thick - You will find drilling plans for identification and data storage systems in the RFID systems catalog - Can be combined with frame modules of WT 2 workpiece pallets

Carrying plate WT 2, ST 4.8 400/400 - For self-assembly of workpiece pallets for product support - Completely drilled and ready for assembly - 15 standard sizes in steel, 4.8 mm thick, with KTL (cataphoretic primer) coating - 10 standard sizes in aluminum, 8 mm thick - 13 standard sizes in aluminum, 12.7 mm thick - You will find drilling plans for identification and data storage systems in the RFID systems catalog - Can be combined with frame modules of WT 2 workpiece pallets

Carrying plate WT 2, ST 4.8 320/400 - For self-assembly of workpiece pallets for product support - Completely drilled and ready for assembly - 15 standard sizes in steel, 4.8 mm thick, with KTL (cataphoretic primer) coating - 10 standard sizes in aluminum, 8 mm thick - 13 standard sizes in aluminum, 12.7 mm thick - You will find drilling plans for identification and data storage systems in the RFID systems catalog - Can be combined with frame modules of WT 2 workpiece pallets

Carrying plate WT 2, ST 4.8 320/320 - For self-assembly of workpiece pallets for product support - Completely drilled and ready for assembly - 15 standard sizes in steel, 4.8 mm thick, with KTL (cataphoretic primer) coating - 10 standard sizes in aluminum, 8 mm thick - 13 standard sizes in aluminum, 12.7 mm thick - You will find drilling plans for identification and data storage systems in the RFID systems catalog - Can be combined with frame modules of WT 2 workpiece pallets

Carrying plate WT 2, ST 4.8 320/480 - For self-assembly of workpiece pallets for product support - Completely drilled and ready for assembly - 15 standard sizes in steel, 4.8 mm thick, with KTL (cataphoretic primer) coating - 10 standard sizes in aluminum, 8 mm thick - 13 standard sizes in aluminum, 12.7 mm thick - You will find drilling plans for identification and data storage systems in the RFID systems catalog - Can be combined with frame modules of WT 2 workpiece pallets

Carrying plate WT 2, ST 4.8 480/480 - For self-assembly of workpiece pallets for product support - Completely drilled and ready for assembly - 15 standard sizes in steel, 4.8 mm thick, with KTL (cataphoretic primer) coating - 10 standard sizes in aluminum, 8 mm thick - 13 standard sizes in aluminum, 12.7 mm thick - You will find drilling plans for identification and data storage systems in the RFID systems catalog - Can be combined with frame modules of WT 2 workpiece pallets

PE 2/XP BG1 positioning unit - Positions a workpiece pallet in a processing station with especially high vertical process force requirements (100 kN/60 kN), such as those needed for press-fit or riveting work - Mounting in force cells, positive force introduction - WT lift above transportation level, approx. 3 mm - Can be combined with WT 2 workpiece pallets

Carrying plate WT 2, ST 4.8 480/640 - For self-assembly of workpiece pallets for product support - Completely drilled and ready for assembly - 15 standard sizes in steel, 4.8 mm thick, with KTL (cataphoretic primer) coating - 10 standard sizes in aluminum, 8 mm thick - 13 standard sizes in aluminum, 12.7 mm thick - You will find drilling plans for identification and data storage systems in the RFID systems catalog - Can be combined with frame modules of WT 2 workpiece pallets

Anvil plate BG 1, b160/lT160 - For PE 2/XP positioning unit

UM 2/B connection kit - For connecting the modules of the TS 2plus on a longitudinal conveyor at the ends (end-to-end)

Carrying plate WT 2, ST 4.8 400/640 - For self-assembly of workpiece pallets for product support - Completely drilled and ready for assembly - 15 standard sizes in steel, 4.8 mm thick, with KTL (cataphoretic primer) coating - 10 standard sizes in aluminum, 8 mm thick - 13 standard sizes in aluminum, 12.7 mm thick - You will find drilling plans for identification and data storage systems in the RFID systems catalog - Can be combined with frame modules of WT 2 workpiece pallets