Bosch Rexroth Ricambi per Automazione Industriale

Trolley profile LF6C - Trolley profile for the construction of trolley LF6C

Guide rod LF12, L150-2900 - The guide rod is pressed into the guide profile - The guide rod guides the guide bearing

Guide rod LF6, L150-3000 - The guide rod is pressed into the clamping profile - The guide rod guides the guide bearing

Strut profile 80x80L 4N Q&E - Minimum profile lengths for profile finishing: see table

Guide rod LF20, L150-2900 - The guide rod is pressed into the guide profile - The guide rod guides the guide bearing

Strut profile 45x135L Q&E

The section is used to construct heavy-duty conveyor units with plastic flat-top chains in connection with the drive modules AS 2/C-... and return units UM 2/C-... - For conveyor unit self-assembly - For use in conjunction with all drive modules AS 2/C-... and return units UM 2/C... - Section profile (50 mm wide) in an especially sturdy version for section loads of up to 30% higher - Conveyor medium plastic flat top chain - Optional steel or plastic GP 2 glide profiles - The WT 2/LS can be used for longitudinal conveyors with this component - It is not possible to cross over

The section is used for the construction of heavy-duty conveyor units in conjunction with the drive modules AS 2/R-... and the return units UM 2/R-... - For conveyor unit self-assembly - For use in conjunction with drive modules AS 2/R…, return units UM 2/R-..., and glide profiles - Section profile in especially sturdy design for section loads of up to 30% higher

For conveyor unit self-assembly The section is used for the construction of conveyor units with the accumulation roller chain Vplus in conjunction with the drive module AS 2/R-V-... and the return unit UM 2/R-V-... - Section profile in especially sturdy design for section loads of up to 30% higher

Function-integrated profile 120x120 6N M12/M12 - Construction profiles with usable interior space for guiding cables and hoses - 2 parts (profile and cover) - Cover with hinge function on both sides - Concealed 10 mm groove for mounting socket strips or installation elements - Screw holes for mounting cover plates - Closed exterior - Mount for dividing strips and grounding cables - Mount for potential equalizer

Round tube D28L, N10, variable length L50-6070 - With a 10 mm slot for fastening of accessories from the modular aluminum framing system - 3 interfaces for attaching EcoShape connectors - The tubes and connectors are ideally suited for long-term use and for reuse

Protective frames B250…1500 - Protective frame made of protective grille profile 30x30 WG40 with woven wire grille 40x40x4 - Suitable kits enable the construction of doors (system doors, sliding doors, double doors) - Fully assembled on delivery - Simple mounting on the supports using the suspension brackets. Single fitter is sufficient - Standard widths or customized dimensions - Horizontally or vertically divided protective frames provide additional stability for large surfaces - Color-coated woven wire grilles improve visual contrast in the protected area and facilitate recognition of access routes and emergency exit routes - Modular dimension "B" relates to 45x45 supports

Protective fence, horizontal sections B250…2500 - Protective frame made of protective grille profile 30x30 WG40 with woven wire grille 40x40x4 - Suitable kits enable the construction of doors (system doors, sliding doors, double doors) - Fully assembled on delivery - Simple mounting on the supports using the suspension brackets. Single fitter is sufficient - Standard widths or customized dimensions - Horizontally or vertically divided protective frames provide additional stability for large surfaces - Color-coated woven wire grilles improve visual contrast in the protected area and facilitate recognition of access routes and emergency exit routes - Modular dimension "B" relates to 45x45 supports

Guide rail LF12, L120-2000 - Guide rail to hold supporting bearings

Sectional rail 17x17.5 L200-3000 - Sectional rails for lateral guiding of the transported material - Suitable for fixed lateral guide holders and variable lateral guide holders - Various materials and geometries for different applications - A: Aluminum profile rail - B: HDPE profile rail - C: Profile rail 17x17.5 - D: D12 profile rail

Synchronous shaft LF20 - Allow several linear guides to be operated synchronously while being driven by a common motor - The synchronous shaft can be replaced without the drive heads having to be disassembled

Synchronous shaft LF12 - Allow several linear guides to be operated synchronously while being driven by a common motor - The synchronous shaft can be replaced without the drive heads having to be disassembled

SZ 2 - ST 2 Reinforcement - For absorbing horizontal forces from the sections - Installation at the end of the section