Panduit Ricambi per Automazione Industriale

Panduit PLT2I-M Locking Cable Ties are designed to satisfy the needs of general applications, while delivering consistent performance and reliability. Featuring a curved tip to allow for easy pick up from flat surfaces and faster initial threading. Intermediate cross section, 8.0” (203mm) length. For indoor use, made of Nylon 6.6, are natural in color and come in packages of 1000.

The VS-AVT-C02-L03 VeriSafe 1.0 Absence of Voltage Tester is a permanently mounted voltage tester for use in 3-phase AC systems up to 600 V. Activating VeriSafe performs an absence of voltage test before opening the panel, helping prevent possible exposure to electrical hazards, improving safety, and reducing downtime. This SKU includes a three-phase AVT tester equipped with 2' system cable, 3' sensor leads and an industrial lithium battery.

The Ultra-Cinch™ Hook and Loop Cinch Cable Tie have hooks and loops on same side to secure a greater range of bundle diameters. The soft, premium material is safe to use on high performance cabling to protect against over-tensioning. The cinch cable tie is adjustable, releasable, and re-usable for applications requiring frequent moves, adds, or changes. The cinch cable tie is 3 inches (76.0mm) maximum diameter.

Panduit PLT3H-L76 Tefzel Locking Cable Ties are designed for applications requiring resistance to environmental stresses such as chemical attack, gamma radiation, ultraviolet radiation and extreme temperatures. Ideal for use in nuclear power facilities and chemical processing plants. Low smoke density and excellent flammability rating of UL 94V-0. Light-Heavy cross section, 11.5” (292mm) length. For indoor or outdoor use, made of Tefzel, are a distinctive aqua color and come in packages of 50.

Panduit PLT4S-M Locking Cable Ties are designed to satisfy the needs of general applications, while delivering consistent performance and reliability. Featuring a curved tip to allow for easy pick up from flat surfaces and faster initial threading. Standard cross section, 14.5” (368mm) length. For indoor use, made of Nylon 6.6, are natural in color and come in packages of 1000.

Panduit MCMS12-P-C Metal Clip-On Mounts enable attachment to sheet metal edges for fast mounting of harness with cable ties. The 4-way cable tie entry feature, allows easy harness orientation. For use in indoor environments and with panels no thicker than 0.13” (3.2mm). Use with miniature, intermediate and standard cable ties. Made of Zinc Plated Steel, are natural in color and come in packages of 100.

The Panduit PV10-14LF-L Loose Fork Terminal is a critical component in various electrical systems. This terminal is designed for funnel entry, ensuring easy and efficient connection of wires. It features a butted seam construction, which enhances its durability and reliability. The terminal is vinyl insulated, providing an additional layer of protection against environmental factors. The PV10-14LF-L Loose Fork Terminal is compatible with 12-10 AWG wires, making it suitable for a wide range of applications. Its standard package size is 1/4 stud, which allows for easy installation and maintenance. This terminal is a reliable choice for those seeking high-quality electrical connections.

Panduit PLT1M-M76 Tefzel locking cable ties are designed for applications requiring resistance to environmental stresses such as chemical attack, gamma radiation, ultraviolet radiation and extreme temperatures. Ideal for use in nuclear power facilities and chemical processing plants. Low smoke density and excellent flammability rating of UL 94V-0. Miniature cross section, 4.0” (102mm) length. For indoor or outdoor use, made of Tefzel, are a distinctive aqua blue in color and come in packages of 1000.

Introducing the Pan-Steel MLT2H-LPAL Stainless Steel Cable Ties, a game-changer in the realm of cable management. These cable ties are designed with a unique self-locking head that ensures a secure and efficient installation process. The smooth edges of these lightweight, flexible aluminum ties promote worker safety, making them an ideal choice for any industrial setting.The heavy cross-section of these cable ties allows for a maximum bundle diameter of 2 inches, ensuring they can handle even the most demanding applications. With a tensile strength of 222 and available in packs of 50, these cable ties are not only durable but also cost-effective.

The NetKey® Cat 6A UTP RJ45 Punchdown Keystone Jack Module is designed to terminate 4-pair, 22–26 AWG twisted pair cable. Each module is 100% factory tested to exceed industry standard performance requirements. Contacts are plated with 50 microinches of gold for superior performance. Jacks are individually serialized for traceability and are compatible with keystone interfaces such as NetKey® Faceplates, Modular Patch Panels, and Surface Mount Boxes. The jack module is green.

Panduit PLT4S-C30 Locking Cable Ties are designed to satisfy the needs of high temperature applications, while delivering consistent performance and reliability. Featuring a curved tip to allow for easy pick up from flat surfaces and faster initial threading. Standard cross section, 14.5” (368mm) length. Made of Heat Stabilized Nylon 6.6, are black in color and come in packages of 100.

The Panduit PWMS-H25-M cable tie mounts are engineered to secure miniature, intermediate, and standard cross-section cable ties. These mounts feature a push barb design that allows for easy installation into pre-drilled holes sized .229" to .255" (5.8mm - 6.5mm) with a maximum panel thickness of .105" (2.7mm).Constructed from Nylon 6.6, these mounts exhibit enhanced mechanical strength, heat and wear resistance, and stiffness compared to other materials. The natural color of the mounts complements any installation environment.

Panduit TMEH-S25-Q0 screw applied extra heavy cable tie mounts are designed for use with Panduit extra-heavy cross section cable ties for mounting cable, large wire bundles, or tubular shapes. Their unique cradle design provides maximum stability for cable bundling, routing and the support of large diameter and heavy cable bundles. Install with #1/4 (M6) screw. For outdoor use, made of Weather Resistant Nylon 6.6, are black in color and come in packages of 25.

Panduit PLT1.5M-XMR30 continuously molded cable ties provide constant feeding for high productivity and reduced downtime due to fewer reel changes. Miniature cross section, 5.6” (142mm) cable ties for use with PAT1.5M4.0 and PDM4.0 system. Made of heat stabilized Nylon 6.6, are black in color and come 5,000 ties per reel.

Panduit TM2S8-M Screw Applied Cable Tie Mounts offer a through hole in the mount in which a screw or rivet can be secured, this offers maximum stability for cable bundles. Install with a #8 (M4) screw. For indoor use and are suitable for miniature, intermediate and standard cross-section cable ties. Made of Nylon 6.6. They are 0.43" (10.9 mm) wide, are natural in color and come in packages of 1000.

Panduit PLT5S-C Locking Cable Ties are designed to satisfy the needs of general applications, while delivering consistent performance and reliability. Featuring a curved tip to allow for easy pick up from flat surfaces and faster initial threading. Standard cross section, 17.5" (445mm) length. Made of Nylon 6.6, are natural in color and come in packages of 100.

Panduit TMEH-S25-C0 screw applied extra heavy cable tie mounts are designed for use with Panduit extra-heavy cross section cable ties for mounting cable, large wire bundles, or tubular shapes. Their unique cradle design provides maximum stability for cable bundling, routing and the support of large diameter and heavy cable bundles. Install with 1/4” (M6) screw. For outdoor use, made of Weather Resistant Nylon 6.6, are black in color and come in packages of 100.

The Wyr-Grid® Bottom Waterfall is designed to maintain a 1.38 inch (35mm) bend radius. It helps transition fiber optic, power, and copper data cables from within the Wyr-Grid® Wire Rack. It snaps on to an 8 inch (203mm), 12 inch (305mm), 18 inch (457mm), 24 inch (610mm), or 30 inch (762mm) pathway section. The waterfall can be installed side by side to increase overall width. The waterfall keeps costs low and delivers fast and simple installation.

The UGB2/0-414-6 Universal Ground Bar securely terminates the main equipment grounding conductor with a compression or mechanical connector in any control panel or enclosure. The universal ground bar accepts #14 – #4 AWG wire in 6 wire ports and up to a 2/0 AWG main equipment grounding conductor with a compression or mechanical connector. Several mounting options are available, including bonding stand-offs, isolation stand-offs, and direct mounting to a panel.

Panduit PLT4I-M0 Locking Cable Ties are designed to satisfy the needs of weather resistant applications, while delivering consistent performance and reliability. Featuring a curved tip to allow for easy pick up from flat surfaces and faster initial threading. Intermediate cross section, 14.5" (368mm) length. Made of Weather Resistant Nylon 6.6 with high resistance to ultraviolet light, are black in color and come in packages of 1000.