Sensori di automazione Pepperl+Fuchs

The retroreflective sensor, designated as ML7-55/59/82b/103/115, is optimized for a variety of standard applications. Its compact design incorporates a polarization filter and a front optical face, allowing for effective detection at a maximum range of 3.5 meters. The sensor employs modulated visible red light as its light source, providing a clear operational signal with a detection spot diameter of approximately 180 mm at 3.5 meters. This device features a dark-on switching type with a single PNP output, which is short-circuit and reverse polarity protected. The output is inactive when the signal falls below the operating reserve, and it is immediately disabled if the light beam is interrupted four times during the flash time. The operating voltage ranges from 10 to 30 V DC, with a maximum ripple of 10% and a no-load supply current less than 20 mA. In terms of durability, the sensor is rated to operate within an ambient temperature range of -20 to 60 °C and can be stored at temperatures as low as -40 °C and as high as 75 °C. The housing is constructed from glass-fiber-reinforced Makrolon, while the optical face is made of PMMA, contributing to its high degree of protection with IP67 and IP69K ratings. This sensor complies with the EN 60947-5-2 product standard and is suitable for use in environments with ambient light up to 40,000 Lux.

The triangulation sensor is equipped with background suppression, making it suitable for intricate tasks. It operates within a detection range of 7 to 20 mm, with a maximum range reaching up to 25 mm. This sensor utilizes a modulated visible red light source at 660 nm, ensuring precise detection with a light spot diameter of approximately 1.5 mm at 20 mm.Notably, the sensor has a compact design with dimensions of 31.4 mm in height, 13.9 mm in width, and 18 mm in depth, while its mass is around 10 g. The connection is facilitated through an M8 x 1 connector, featuring a 4-pin configuration. The device is constructed from ABS housing with a glass optical face, ensuring durability.With an operating voltage range of 10 to 30 V DC, the sensor provides a push-pull output that is short-circuit and reverse polarity protected. It supports a maximum switching voltage of 30 V DC and a switching current of up to 100 mA with a response time of 0.5 ms. The product conforms to the EN 60947-5-2 standard and is rated for high ambient light conditions, allowing operation in environments with continuous light up to 40,000 Lux.Designed to withstand harsh conditions, the sensor has an IP67/IP69K protection rating and can operate in temperatures ranging from -20 to 60 °C. The Designation Code for this product is ML4.2-8-H-20-RT/40b/95/110.

The retroreflective sensor, designated as ML6-54-F/25/95/136, is designed for standard applications. It operates effectively within a detection range of 0 to 6 meters, utilizing a modulated visible red light source at 660 nm. The sensor is equipped with a polarization filter to enhance detection capabilities.It offers two programmable push-pull outputs that are complementary and protected against short-circuits and reverse polarity. The device supports a maximum switching voltage of 30 V DC and a current of up to 100 mA, with a response time of 500 microseconds and a switching frequency of 1 kHz.In terms of electrical specifications, it operates within a voltage range of 10 to 30 V DC with a no-load supply current of less than 20 mA at 24 V DC. The sensor also includes various indicators: a green LED for power status, a pulsing green LED for undervoltage, and a yellow LED indicating the switching state.With a robust design, it is rated IP67/IP69K for protection against dust and water ingress, and it can withstand ambient temperatures from -20 °C to 60 °C. The housing is constructed from ABS, while the optical face is made of PMMA, ensuring durability and reliability in various industrial environments.

The triangulation sensor is equipped with background suppression, making it ideal for standard applications. The adjustable detection range spans from 15 mm to 120 mm, allowing for flexible implementation in various environments. Its miniature design is complemented by a fixed cable connection, enhancing installation convenience.Utilizing modulated infrared light at 880 nm, the sensor effectively distinguishes between light and dark surfaces. The sensor operates with two push-pull outputs that can be programmed for light/dark switching. Its electrical specifications include an operating voltage of 10 to 30 V DC and a maximum switching current of 100 mA, with a switching frequency of 1000 Hz and a response time of 500 µs.Compliance with standards is assured, adhering to EN 60947-5-2:2007 and IEC 60947-5-2:2007 for product standards. The sensor is rated at IP67/IP69K, ensuring reliable performance even in harsh conditions, with an ambient temperature range of -20 to 60 °C and a storage temperature capability of -40 to 75 °C.For further details, the Designation Code is ML6-8-H-120-IR/59/65a/115/136.

The retroreflective sensor ML4.2-54-F/40b/95/110 is designed for complex applications, featuring a detection range that extends up to 6 m. It utilizes a modulated visible red light source at 660 nm and is equipped with a polarization filter, enhancing its performance in various lighting conditions.With an effective detection range of 0 to 5 m and a reflector distance of 0 to 5 m, the sensor operates reliably under ambient light conditions of up to 40,000 Lux for continuous light and 5,000 Lux for modulated light. The device has a maximum angle deviation of ± 1°, with a light spot diameter of approximately 40 mm at a detection range of 1 m.Electrical characteristics include an operating voltage of 10 to 30 V DC, with a no-load supply current of less than 20 mA at 24 V DC. The output is a push-pull type, allowing for electrically switchable light/dark operation, with a maximum switching voltage of 30 V DC and a switching current of up to 100 mA.The sensor is housed in an IP67/IP69K rated enclosure, ensuring robust protection against dust and water. It operates effectively within a temperature range of -20 to 60 °C and features an M8 x 1 connector for easy integration. The compact dimensions (31.4 mm height, 13.9 mm width, and 18 mm depth) and lightweight design (approx. 10 g) make it suitable for various applications.Compliance with EN 60947-5-2 standards ensures its reliability, and it has received CE and EAC certifications, along with UL and CCC approvals. Diagnostic features include LED indicators for power status and fault conditions, ensuring operational transparency.

The Pepperl+Fuchs Safety Light Curtain SLC14-450 offers advanced protection with a sensing range of up to 5 meters and a high resolution of 14mm, making it ideal for finger protection applications. Designed to meet the stringent requirements of IEC/EN 61496-1 (Type 4), this light curtain ensures reliable self-monitoring and safety.Featuring a protective field height of up to 1800mm, the SLC14-450 is equipped with master/slave detection and plug-and-play functionality for easy installation and setup. The integrated function display and pre-fault indication provide clear operational status and early warning of potential issues, enhancing overall safety and maintenance efficiency.The safety outputs are designed in a potential-separated semiconductor configuration or with monitored, compelled connection NC-contacts, ensuring robust and reliable performance. An optional relay monitor (Option 129) is available for added flexibility.With a degree of protection rated at IP67, the SLC14-450 is suitable for use in harsh industrial environments, providing excellent resistance to dust and water ingress. The start/restart disable feature further enhances operational safety by preventing accidental restarts.

The Pepperl+Fuchs Ex Hazardous Location Sensor MLV41-6-IO/95/136 is a highly reliable and robust retroreflective sensor designed for use in hazardous locations. Its compact housing design and IO-Link interface provide seamless integration and enhanced service and process data management. With a detection range of up to 9.5 meters and a red light source, this sensor ensures precise and accurate detection in various industrial applications.Key benefits of the MLV41-6-IO/95/136 include its rugged series in corrosion-resistant metal housing, which ensures durability and longevity even in harsh environments. The sensor features an extremely high switching frequency of 1000 Hz, making it suitable for high-speed applications. The clear and functional display concept allows for easy monitoring of operating modes, while its resistance to noise guarantees reliable operation under all conditions.The aluminum housing with high-quality Delta-Seal coating provides additional protection against environmental factors. The sensor's versatile 2 push-pull outputs are complementary, short-circuit proof, and reverse polarity protected, ensuring safe and reliable operation. The MLV41-6-IO/95/136 is compliant with EN 60947-5-2 standards and is UL and CCC approved, making it a trusted choice for industrial automation.

The Pepperl+Fuchs Inductive Ring Sensor RC10-14-N0 is engineered for accurate and reliable detection in various industrial environments. Featuring a 10 mm inside diameter, this sensor is designed to detect metallic objects passing through its ring. The sensor operates with a normally closed (NC) switching function and utilizes NAMUR output for seamless integration into existing systems.Constructed with a robust PBT housing and offering IP67 protection, the RC10-14-N0 is built to withstand harsh conditions, ensuring long-term durability and performance. The sensor supports a wide operating voltage range of 5 to 25 V and a high switching frequency of up to 2000 Hz, making it suitable for high-speed applications.Compliance with EN 60947-5-6 and IEC 60947-5-6 standards guarantees reliable performance and safety. Additionally, the sensor is approved for use in hazardous areas with ATEX and FM certifications, providing peace of mind in critical applications.The RC10-14-N0 features a 2-wire output type and does not require a reverse polarity protection diode, simplifying installation and maintenance. The sensor's cable connection type includes wire end ferrules for secure and reliable connections.Applications:Ideal for use in industrial automation, material handling, and manufacturing processes where precise detection of metallic objects is crucial.

Ensure seamless and safe operation in demanding industrial environments with the Pepperl+Fuchs 515081 industrial proximity switch. This highly reliable component is specifically designed for use in hazardous areas and is certified for applications in Zone 1 and 21, providing a critical safety layer for your machinery.Utilizing advanced inductive sensing technology, this proximity switch reliably detects the presence of metallic objects with exceptional accuracy. Its repeatable switching point ensures stable and consistent operation, making it perfect for critical applications like conveyor systems, packaging machinery, and assembly lines where precision is paramount. The rugged construction and high-quality components of the 515081 provide long-lasting durability and exceptional performance, even in harsh operating conditions. This Pepperl+Fuchs sensor is compatible with a wide range of automation systems and is a testament to the brand's commitment to delivering high-quality, reliable solutions for modern manufacturing environments.

Il 96354 di Pepperl+Fuchs è un prodotto all'avanguardia per l'automazione industriale progettato per migliorare l'efficienza e la produttività dei processi di produzione. Questo componente ad alte prestazioni vanta un design robusto e caratteristiche avanzate che gli consentono di resistere anche agli ambienti industriali più difficili. Con i suoi sensori di precisione e il sistema di controllo affidabile, il 96354 può garantire un funzionamento accurato e coerente di macchinari e apparecchiature. È abbastanza versatile da poter essere integrato in un'ampia gamma di applicazioni industriali, dalla produzione automobilistica alla lavorazione degli alimenti. Il 96354 di Pepperl+Fuchs è uno strumento indispensabile per qualsiasi produttore che desideri ottimizzare i propri processi di produzione e aumentare i profitti. Con le sue prestazioni e la sua durata leader del settore, questo prodotto di automazione è un investimento che ripagherà i dividendi per gli anni a venire.

The DoorScan Interface Set is designed for integration within the DoorScan® and TopScan sensor profiles, acting as both a replacement and an extension module. It operates in a background evaluation mode, ensuring continuous monitoring and functionality. This module meets safety integrity requirements with a Safety Integrity Level (SIL) of 2, Performance Level (PL) d, and Category 2 compliance, providing a Mean Time to Dangerous Failure (MTTFd) of 2716 years and a Mission Time (TM) of 20 years. Its diagnostic coverage stands at 90%, enabling reliable performance. For user interaction, the module includes multiple LED indicators: a red LED indicates detection and fault codes, a yellow LED shows teach status, and a green LED represents blank and DIP switch statuses. Electrical specifications highlight an operating voltage of 24 V DC ± 20% with a no-load supply current of 30 mA. The test input functions at high active levels between 15 V DC and 30 V DC, and low active below 2 V DC. Control input operates in standby mode at 11 V DC to 30 V DC. The output switching type supports hinge edge light on and leading edge light on/dark on configurations, with a signal output that is NPN and short-circuit protected. The module can handle switching voltages up to 30 V DC and currents up to 100 mA, with a response time of ≤ 52 ms, extending to ≤ 200 ms in boost operating mode. This module conforms to functional safety standards, including ISO 13849-1 and EN 61508, and adheres to product standard EN 12978. It is suitable for a broad range of ambient conditions, operating effectively in temperatures from -30 °C to 60 °C (-22 °F to 140 °F). Mechanically, it features a maximum mounting height of 3500 mm and provides an IP54 protection rating when properly mounted. The connection is facilitated via a 6-pin plug strip and the cable comprises a 6-wire design with a sheath diameter of approximately 4.8 mm. The package includes the sensor module, wall bracket, screw kit, cord grip, cable, cable sheathing, and hollow rivet, ensuring comprehensive installation support.

The triangulation sensor, designated as ML6-8-H-40-RT/95/102, is engineered for standard applications with a compact design. It supports an adjustable detection range between 10 mm and 40 mm, with a maximum detection range of up to 50 mm. The device utilizes a modulated visible red light source, operating at a wavelength of 660 nm, ensuring precise object detection.This sensor exhibits a significant black-white difference of approximately 3 mm, with a light spot diameter around 3 mm at 40 mm. Its opening angle measures about 5 degrees, allowing for effective background suppression commencing from 50 mm. The sensor operates under ambient light conditions with limits of 40,000 Lux for continuous light and 5,000 Lux for modulated light.Electrical specifications include an operating voltage of 10 to 30 V DC and a no-load supply current of less than 25 mA. The output is NPN type, with features such as open collector short-circuit protection and reverse polarity protection. The sensor is capable of switching at a frequency of 1,000 Hz, with a response time of 0.5 ms and a maximum switching voltage of 30 V DC.In terms of environmental resilience, the sensor has a degree of protection rated at IP67 and IP69K. It is constructed from ABS housing and PMMA optical face materials, designed to operate in temperatures ranging from -20 °C to 60 °C. The sensor also complies with EN 60947-5-2 and has undergone rigorous testing for shock and vibration resistance in accordance with IEC / EN 60068 standards.

The congested track scanner background suppression sensor is designed for precise object detection within an adjustable range of 40 to 900 mm, making it suitable for various applications. It utilizes modulated infrared light at a wavelength of 880 nm and offers a detection capability that is effective even in challenging lighting conditions, with an ambient light limit of 30,000 Lux for continuous light. Key operational parameters include a maximum switching frequency of 100 Hz and a response time of 5 ms, ensuring rapid detection. The sensor is equipped with a 4-pin M12 x 1 connector and a fixed cable length of 3500 mm, allowing for flexible installation. The device's robust design meets IP65 standards for protection against dust and water ingress, and it can function effectively within a temperature range of -15 to 50 °C (5 to 122 °F). Additionally, the background suppression sensor features a function indicator in the form of a yellow LED that illuminates when an object is detected. It is also compatible with a pneumatic output featuring a 3/2 way valve, which operates under air pressures between 2 and 8 bar (29 to 116 psi). The product adheres to the EN 60947-5-2 standard and has been tested for shock, impact, and vibration resistance according to IEC/EN 60068 standards. For further technical classification, it is categorized under ECLASS and ETIM codes. The designation code for this sensor is SBL-8-H-900-IR-SL-V-4385.

The triangulation sensor with background suppression is designed for complex applications, offering a detection range of 10 to 40 mm with a maximum detection capability of up to 50 mm. The device utilizes a modulated visible red light source at 660 nm, and features a fixed cable with an M12 plug.Operating under a voltage range of 10 to 30 V DC, the sensor has a no-load supply current of less than 25 mA. Its push-pull output is short-circuit and reverse polarity protected, with a maximum switching voltage of 30 V DC and a current of up to 100 mA. The response time is 0.5 ms, and it can operate at a switching frequency of 1000 Hz. The Designation Code for this model is ML4.2-8-H-40-RT/40b/110/115b.The sensor is equipped with various indicators, including a green LED for power status and a yellow LED that activates when an object is detected. It also features robust mechanical specifications, with a degree of protection rated at IP67/IP69K and a housing made of ABS. The optical face is constructed from glass, and the cable is made from PUR, ensuring durability in various environments.In terms of compliance, the device meets the standards of EN 60947-5-2:2007 and IEC 60947-5-2:2007, with approval for cULus Listed and CE conformity. It can function in ambient temperatures ranging from -20 to 60 °C and can be stored in temperatures from -20 to 75 °C.

The Retroreflective Sensor is designed for complex applications, providing precise object detection up to an effective range of 6 m. It utilizes a modulated visible red light source with a wavelength of 660 nm and includes a polarization filter for enhanced performance.In TEACH mode, the effective detection and reflector distance can be adjusted up to 3.5 m, and in standard mode, up to 5 m can be achieved. The sensor is equipped with a 5-step switch for setting contrast detection levels, allowing for customization based on the material being detected, such as clean PET bottles or colored glass.With a degree of protection rated at IP67/IP69K, this device is suitable for challenging environments, capable of withstanding ambient temperatures ranging from -20 to 60 °C. The unit's compact dimensions, measuring 31.4 mm in height, 13.9 mm in width, and 18 mm in depth, make it ideal for applications where space is limited.Further enhancing its functionality, the sensor features a push-pull output with a maximum switching current of 100 mA and a response time of 500 µs. Compliance with standards such as EN 60947-5-2:2007 ensures reliability and safety in various operational contexts. The Designation Code for this model is ML4.2-54-G/40b/110/115.

The triangulation sensor is designed for standard applications with background suppression, ensuring reliable performance. With a detection range adjustable from 15 mm to 150 mm, this sensor effectively detects objects using a modulated visible red light source at a wavelength of 660 nm. The Designation Code for this model is ML6-8-H-150-RT/59/65a/115/136.It operates within an ambient temperature range of -20 to 60 °C and is housed in a robust enclosure rated IP67/IP69K, making it suitable for various environmental conditions. The sensor features two push-pull outputs that are short-circuit proof and reverse polarity protected, with a maximum switching current of 100 mA and a voltage drop of ≤ 2.5 V DC. The response time is efficient at 500 µs, allowing for quick detection and processing.The operating voltage ranges from 10 to 30 V DC, with a no-load supply current of less than 25 mA. Additionally, an LED indicator provides visual feedback on operation status, while the sensing range can be adjusted easily using the integrated control element.With compliance to product standards such as EN 60947-5-2 and shock resistance verified under IEC / EN 60068, this sensor is robust enough for demanding industrial applications.

The background suppression sensor, designated as ML10-8-H-3,2-IR/115, operates using modulated infrared light at 870 nm and is engineered for precise detection. It provides a detection range from 0.9 mm to a maximum of 4 mm, with background suppression beginning at 4 mm. The sensor's light spot diameter measures 2 mm when positioned at a range of 2.2 mm, and it has an opening angle of approximately 24°.With a switching accuracy of less than 0.5 mm for black (6%) and white (90%) surfaces, the sensor ensures reliable performance. Its repeat accuracy for white surfaces is below 0.1 mm. The device is built to withstand ambient temperatures ranging from -20 °C to 60 °C and can be stored in temperatures as low as -20 °C and as high as 75 °C.Constructed with an IP65 protection degree, the housing is made from a combination of PC/ABS, while the optical face is glass. The sensor is equipped with a 2 m cable featuring a 5-pin connector, and the overall dimensions are 14 mm in height, 12 mm in width, and 20 mm in length. The unit weighs 30 g and adheres to multiple standards and directives, including EN 60947-5-2:2007 and IEC 60947-5-2:2007 for electromagnetic compatibility.

The triangulation sensor is designed for standard applications and incorporates background suppression technology. It features an adjustable detection range from 10 mm to 60 mm, with a maximum detection capability reaching 80 mm. The sensor operates using modulated visible red light at a wavelength of 660 nm, ensuring precise detection. The diameter of the light spot at 60 mm is approximately 4 mm, with an opening angle of around 5 degrees.It includes two push-pull outputs that are programmable for light/dark on switching and are equipped with short-circuit protection and reverse polarity safeguards. The sensor supports a switching frequency of up to 1000 Hz and has a response time of 0.5 ms, making it suitable for dynamic applications.With a robust design, it achieves a degree of protection rated at IP67 and IP69K, ensuring reliable operation in harsh conditions. The sensor can function effectively in ambient temperatures ranging from -20 °C to 60 °C, and has a storage temperature capability of -20 °C to 75 °C. The housing is constructed from ABS, while the optical face is made of PMMA, making the unit lightweight at approximately 50 g.The product conforms to the EN 60947-5-2 standard and meets various safety and environmental compliance certifications, including cULus and CCC. The designation code for this model is ML6-8-H-60-RT/59/115a/136, which can be referenced for further specifications and details.

The triangulation sensor with background suppression, designated as OBT15-R2-E0-Y264205, is engineered for standard applications and offers a compact form factor. It has a detection range varying from 2 to 15 mm, optimized for detecting standard white targets measuring 100 mm x 100 mm.Powered by a modulated visible red light LED at 630 nm, the device maintains a black-white difference of less than 5% at 15 mm. The light spot diameter is approximately 2 mm at this distance, with an angle deviation of around 2 degrees. It operates effectively under ambient light conditions up to 30,000 Lux, complying with the EN 60947-5-2 standard.For functional safety, the sensor has a mean time to failure (MTTFd) of 800 years and a mission time (TM) of 20 years, with no diagnostic coverage. Operational indicators include a green LED for power and a yellow LED that signals when an object is detected.Electrical specifications include an operating voltage range of 10 to 30 V DC, with a no-load supply current of less than 10 mA. The output is configured as a normally open contact with a single NPN output that is short-circuit and reverse polarity protected, capable of handling a maximum switching voltage of 30 V DC and a current of 50 mA on resistive loads. The switching frequency is approximately 800 Hz, with a response time of 600 µs.The sensor is designed for a wide ambient temperature range of -25 to 60 °C and can withstand storage temperatures as low as -30 °C and as high as 70 °C. It features an IP67 protection rating, indicating its suitability for harsh environments. The housing is made from PC/ABS and TPU, while the optical face is constructed from glass. The device includes a 2-meter fixed cable and is equipped with two mounting holes for easy installation.

The area scanner with the designation code FLT-8-HW-2800-500/59/101 is engineered to effectively detect people and objects within a detection field of 500 mm x 500 mm at a sensor range of 2000 mm. It operates within a detection range that spans from 0 to 2800 mm, utilizing a light source composed of four modulated infrared light emitting diodes (IREDs).Functionality is characterized by a dark-on switching type, providing both PNP and NPN outputs that are short-circuit protected. The device supports a maximum switching voltage of 48 V DC and a current of 200 mA, enabling rapid response times of 100 ms with a de-energized delay of 200 ms. The device is also equipped with an LED indicator for operational status and a sensing range adjuster for fine-tuning detection parameters.This area scanner is built to withstand ambient temperatures ranging from -20 °C to 60 °C and features a robust IP65 degree of protection, making it suitable for various industrial environments. The housing is made from Makrolon GV30, while the optical face is crafted from red glass, ensuring durability and clarity in detection. With a maximum mounting height of 2800 mm, it can be effectively integrated into a variety of applications.