Accessori generali Phoenix Contact

The VC-TFS 6-PE contact insert is designed for use within the VARIOCON series. It is constructed from polyamide and is available in a light grey color. This insert supports a range of six positions…

The D-SUB contact carrier is specifically engineered to accommodate two combined contacts within a shell size of 1. This unit employs a fixing method utilizing a 4-40 UNC thread and solder pins…

This D-SUB contact insert, identified by the designation code VS-15-ST-DSUB-HD-ER , is tailored for high-position applications and is compatible with PCB assembly. It comprises a shell size of 2 and…

The M23 device connector, designated as CA-12P2S12AD00 , is designed for front mounting applications. It features a total of 12 positions and employs a pin contact type with solder connections. This…

The C-SAT-BOX is engineered for effective surge protection in antenna distribution systems utilized in satellite applications. It accommodates signals from both satellite systems and terrestrial…

The DFK-IPCV 16/ 2-G-10,16 is a feed-through header designed for efficient electrical connectivity. With a nominal cross section of 16 mm² and a current rating of 76 A, this component supports a…

The Surge Protection Device DT-LAN-CAT.6+ is designed to provide surge protection in accordance with Class EA (CAT6A) standards. This device facilitates high-speed data transmission for Gigabit…

The FMC 0,5/ 3-ST-2,54 C2 is a printed-circuit board connector that accommodates a nominal cross-section of 0.5 mm². It supports a nominal current of 6 A and operates at a rated voltage of 160 V…

The IFMC 1,5/ 3-ST-3,5-RN is designed as a printed-circuit board connector with a nominal cross section of 1.5 mm² and is green in color. It supports a nominal current of 8 A and operates at a rated…

The PP 2,5/13 plug features a nominal voltage of 800 V and a nominal current capacity of 24 A, utilizing a push-in connection method for streamlined installation. This component supports a rated…

The SACC-DSIV-FS-8CON-L90 SCO is an 8-position flush-type female connector, specifically tailored for sensor and actuator applications. This connector employs M12 SPEEDCON A-coding and is designed…

The marking foil for zack marker strip, designated as TML (101X9,5)R TR , consists of a roll that is transparent and unlabeled, specifically crafted for labeling with devices such as THERMOMARK ROLL…

The CA-17P1NC22S00 is a front mounting device connector designed with an M23 thread type. This connector is equipped with 17 positions and utilizes a pin contact method, ensuring reliable signal…

The 1.5 mm² PCB Connector , designated as FMC 1,5/18-ST-3,81 , features a green housing and is suitable for various applications requiring reliable electrical connections. It supports a nominal…

The FP 0,8/ 32-MV-SH 1,15 is a shielded SMD male connector that operates at a nominal current of 1.7 A and supports a test voltage of 500 V AC. This connector is engineered with 32 positions arranged…

The FRONT-MC 1,5/ 8-STF-3,81 is a printed-circuit board connector designed for a nominal cross section of 1.5 mm², facilitating reliable electrical connections in various applications. With a nominal…

This engraving material, designated as GPE 27X 8 WH/R CUS , is offered in a white finish and is customizable per customer requirements. It features a mounting type that utilizes adhesive, ensuring…

The IFMC 1,5/ 5-ST-3,5-RF PCB connector is designed to provide reliable connectivity with a nominal cross section of 1.5 mm² and a maximum nominal current of 8 A. This component is characterized by…

The PP-H 2,5/5 (1GNYE/4GY) plug is designed for efficient electrical connections, accommodating a nominal voltage of 500 V and a nominal current of 24 A. It utilizes a push-in connection method…

The PP-H 4/ 1 BU plug is designed for applications requiring a nominal voltage of 800 V and a maximum load current of 32 A. Its push-in connection method facilitates ease of installation, with the…