Accessori generali Phoenix Contact

The HC-B 6-TMB-100/O1STM25S-EUA sleeve housing is optimized for enhanced environmental conditions, making it suitable for various demanding applications. This housing, with a height of 100 mm and an…

The coupler connector is designed as a straight short variant with a screw locking feature, suitable for M40 applications. It provides a configuration of 2+3+PE positions and utilizes a pin type…

The M40 coupler connector, designated as SB-8EPSD8A9L33S , features a straight long design suitable for various applications. It is equipped with shielding for signal integrity and supports both…

The M23-17S1N8AA500S device connector is designed for front mounting applications, featuring a total of 17 positions and a standard direction of rotation. This connector utilizes a crimp connection…

The crimp contact, designated as CK2,5-ED-1,50ST-S AG , is engineered for reliable performance in various applications. It has a contact diameter of 2.5 mm and is constructed from a copper alloy…

The SDDC 1,5/16-PV-3,5 is a direct connector designed for PCB applications. It features a nominal cross section of 1.5 mm² and supports a nominal current of 8 A along with a rated voltage of 160 V…

The IMC 1,5/ 2-STGF-3,81 is a printed circuit board connector characterized by a nominal cross-section of 1.5 mm² and a current rating of 8 A. It is suitable for applications requiring a rated…

The ME 67,5 UT/FE BUS/5+2 KMGY is a DIN rail housing designed for efficient mounting and connectivity. It has dimensions of 67.8 mm in width, 99 mm in height, and 107.3 mm in depth. The housing is…

The UCS SW 195-F 7035 side panel is tailored for compatibility with universal housings. It accommodates half shells of dimensions 237 x 195 mm and 195 x 145 mm. Constructed from polycarbonate, this…

The PT 1X2-24DC/FM-ST surge protection plug is engineered to provide reliable surge protection for electrical installations. This module incorporates an integrated diagnostic and status indicator…

The SPB 2,5/ 1-R GNYE plug is designed for reliable electrical connections with a nominal voltage of 500 V and a maximum load current of 24 A when using a conductor cross section of 4 mm². This…

The Plug, designated as PP-H 1,5/S/1 BU, supports a nominal voltage of 500 V and a nominal current of 17.5 A. It employs a push-in connection method and is suitable for applications within the…

The COMBI receptacle, designated as PPC 1,5/S/ 7 , operates at a nominal voltage of 500 V and supports a maximum load current of 17.5 A when using a 1.5 mm² conductor cross-section. Designed for…

The SACC-SQ-M12FS-8CON-20-L180 is a front mounting device connector characterized by its universal 8-position configuration. With a straight plug and square flange design measuring 20 mm on each…

The SACC-DSI-M12FS-8CON-L180P is a sensor/actuator connector characterized by its M12 A coding and rear mounting capability. This model supports a total of 8 positions and is designed for solder…

The CA-07P1N8A9008 is an M23 coupler connector designed for reliable connections in various applications. It features a straight design and is shielded to minimize interference, making it appropriate…

This DIN rail connector is designed for efficient connectivity with a nominal cross section of 2.5 mm² and a maximum nominal current of 12 A. It features a rated voltage of 320 V according to…

The IMC 1,5/13-STGF-3,81 is a printed-circuit board connector designed for reliable electrical connections. It is characterized by a nominal current rating of 8 A and a rated voltage of 160 V under…

The DFK-MSTBA 2,5/15-GF-5,08 feed-through header is designed for applications requiring a compact connection solution. It has a nominal cross section of 2.5 mm² and supports a nominal current of 12 A…

The FMC 1,5/ 6-ST-3,5-RF is designed for printed circuit board applications, featuring a nominal cross section of 1.5 mm² and a nominal current capacity of 8 A . The connector is suitable for…