Connettività Phoenix Contact

The FMC 1,5/7-STF-3,5 is a printed-circuit board connector designed for efficient connectivity in electronic applications. With a nominal cross section of 1.5 mm² and a maximum current rating of 8 A…

The COMBI receptacle, designated as PPC 6/8, operates at a nominal voltage of 1000 V and supports a maximum current of 41 A. It utilizes a push-in connection method, allowing for efficient…

The SACC-DSI-MSB-5CON-L180/SH VT is engineered for rear mounting and features a 5-position configuration. It includes a violet contact carrier and utilizes M12 SPEEDCON technology for secure…

The contact insert module designated as HC-M-03/04-CT-M comprises a configuration of 3 power contacts and 4 control contacts, suitable for applications involving both power and signal transmission…

The PTFIX 6X2,5-NS35 VT distribution block is designed for efficient electrical connections with a nominal voltage rating of 690 V and supports a maximum nominal current of 24 A. Its vertical…

The Crimp Contact CC1,0-TS-1,00M AU is designed for reliable connections in various applications. With a contact diameter of 1 mm, this turned pin contact is constructed from CuZn, ensuring good…

Data connector, PROFINET CAT5 (100 Mbps), 4-position, shielded, Plug straight M12, D-coded, Insulation displacement connection, knurl material: Nickel-plated brass, external cable diameter 4 mm ... 8…

The SF-08KS020 crimp contact is designed for reliable electrical connections, featuring a contact diameter of 0.8 mm and a crimp range of 0.34 mm² to 0.5 mm² . It is produced in Germany and meets…

This plug is designed for applications requiring reliable electrical connections, offering a nominal voltage of 500 V and a maximum current capacity of 24 A. With a push-in connection method, it…

This distribution block is designed for efficient interconnection, allowing for bridging between blocks via the conductor shaft. The vertical alignment and integrated supply enhance installation…

The distribution block supports a nominal voltage of 800 V and a nominal current of 57 A , designed with a push-in connection method to ensure secure electrical connections. The rated cross section…

The PTFIX 4/12X1,5 GN serves as a basic terminal block designed for effective electrical distribution. With a nominal current rating of 41 A, it utilizes a push-in connection method for reliable line…

The PTFIX 4/6X1,5-NS15A BK Distribution block is designed to handle nominal voltages up to 500 V and nominal currents of 17.5 A. This device utilizes a Push-in connection method for both Load contact…

The distribution block allows for bridging with additional units via the conductor shaft, facilitating enhanced connectivity options. It is designed for basic terminal applications with a nominal…

The Test terminal strip RSCWE 6-3/19 operates at a nominal voltage of 400 V and features a single level design with a rated cross section of 6 mm². This unit is specifically constructed for wall…

The M23 device connector is engineered for rear mounting applications, characterized by its 16-position socket configuration and crimp connection method. This connector is compliant with RoHS II…

The FMC 0,5/9-ST-2,54 C2 is a printed-circuit board connector designed for reliable electrical connections. With a nominal cross-section of 0.5 mm², this connector can handle a nominal current of 6 A…

The 1.5/80-2 Marshalling Patchboard is designed for efficient wiring management, featuring labeling from 1 to 80 for clear identification. It operates at a nominal voltage of 500 V and a nominal…

The SK 3,8 WH marker strip is designed for labeling applications with a width of 3.8 mm and a total length of 90 m. It is compatible with labeling systems such as THERMOMARK ROLL 2.0 , THERMOMARK…

The SP-H 2,5/ 1-R BU plug accommodates a nominal voltage of 500 V and supports a maximum load current of 24 A, optimized for use with a conductor cross-section of 4 mm². Its robust spring-cage…