Connettori e spine Phoenix Contact

The ST-3EP1N8ACK04S is a panel feed-through designed for reliable connectivity in various applications. It incorporates a SPEEDCON locking system and features an M17 interface with a total of 3+PE…

The CK1,6-ER-1,00ST Crimp Contact is designed for reliable electrical connections, with a contact diameter of 1.6 mm. Constructed from a nickel-plated copper alloy, it features a silver-plated…

The M23 coupler connector CA-07P1N129006 is engineered with 7 positions and supports both standard and SPEEDCON interlock mechanisms. It features a pin contact type and utilizes a solder connection…

The feed-through header, designated as DFK-IPC 16/3-GF-SH-10,16 , has a nominal cross section of 16 mm² and is designed for a nominal current of 76 A. It operates at a rated voltage of 1000 V and is…

The feed-through header, designated as DFK-IPC 16/ 8-G-10,16 , incorporates a nominal cross section of 16 mm² and is designed to handle a nominal current of 76 A. It operates effectively at a rated…

The DFK-MSTB 2,5/9-GF connector is designed for direct mounting and features a solder/slip-on connection method. It offers a nominal current rating of 12 A and is suitable for rated voltages up to…

This DIN rail connector features a nominal cross section of 2.5 mm² and is designed to handle a nominal current of 12 A with a rated voltage of 320 V (III/2). The connector has a total of 12…

The DIN rail connector, designated as MSTBVK 2,5/21-G-5,08, is constructed for a nominal current of 12 A and operates at a rated voltage of 320 V. The connector features a green housing and a nominal…

The COMBI receptacle is designed for reliable connectivity with a nominal voltage rating of 500 V and a maximum current capacity of 17.5 A. It employs a push-in connection method, facilitating…

The conductor connectors utilize QUICKON technology, facilitating rapid and secure connections for conductor sizes from 1 mm² to 2.5 mm². These connectors are designed to operate at a rated voltage…

The conductor connectors are designed for efficient connectivity with a QUICKON connection profile, supporting a configuration of 3+PE positions. These connectors are suitable for wire sizes ranging…

The MSTBVK 2,5/5-STF-5,08 is a DIN rail connector designed for reliable electrical connections. With a nominal cross section of 2.5 mm², it can handle a nominal current of 12 A and a rated voltage of…

The SC 2,5-RZ/12 COMBI receptacle is designed for demanding applications, supporting a nominal voltage of 500 V and a maximum load current of 24 A . This receptacle utilizes a spring-cage connection…

The SACC-DSIV-FSB-5CON-L90 SCO device connector is engineered for sensor and actuator applications, featuring a 5-position M12 SPEEDCON socket. It is designed for rear mounting, utilizing an M12…

The CA-07S1N129008 is an M23 coupler connector featuring a straight design and a shielded construction, suitable for both standard and SPEEDCON interlock configurations. This connector is equipped…

This M23 coupler connector, designated as SH-8ESS48A9LB3S, offers a straight long housing design with shielding for enhanced signal integrity. It is equipped with a total of 13 positions, comprising…

The M23 device connector is specifically engineered for front mounting applications. It features an angled rotatable design, which allows for flexible installation options. This connector supports a…

The SACC-DSIV-M12FS-5CON-L 90 device connector is specifically designed for sensor and actuator applications. It features a 5-position configuration with an A-code, allowing for secure and reliable…

The DFK-MC 1,5/2-GF-3,81 is designed for direct mounting applications, featuring a nominal cross section of 1.5 mm² and a green housing. This component supports a nominal current of 8 A and operates…

The COMBI receptacle operates with a nominal voltage of 500 V and is rated for a maximum current of 24 A . Its spring-cage connection method supports a conductor cross-section ranging from 0.08 mm²…