I/O remoto e comunicazione Phoenix Contact

The Digital Input Terminal IB IL 24 DI 16-PAC is an inline device designed for digital inputs, featuring a total of 16 inputs operating at 24 V DC. It employs a robust 3-conductor connection…

The AXL F SGI2 1H serves as a strain gauge capture module, featuring a transmission speed of 100 Mbps on the local bus. This module has an IP20 degree of protection and is designed for industrial…

The extension module EM-D-8/4-24DC-IFS is essential for handling more intricate tasks involving Interface system devices (IFS). It facilitates the integration of digital inputs and outputs, allowing…

The Relay Module PLC-RSC- 24UC/21/MS forms an integral component of the PLC-INTERFACE system, incorporating a PLC-BSC.../21 basic terminal block with a secure screw connection. It includes a plug-in…

The relay module, designated as PLC-RSC- 12DC/21-21 , integrates a basic terminal block and a plug-in miniature relay for efficient control applications. Designed for installation on a DIN rail NS…

The AXL F DO16/2 2H is a digital output module designed for industrial applications, featuring 16 digital outputs that operate at 24 V DC. This module employs a 2-conductor connection technology and…

The VIP-3/PT/FLK64 is a VARIOFACE module intended for installation on NS 35 DIN rails. It includes a push-in connection alongside a flat-ribbon cable connector, accommodating up to 64 positions. The…

The IB IL 24 DI 32/HD-NPN-PAC is an inline digital input terminal with 32 NPN inputs, suitable for 24 V DC operation. It employs a single-conductor connection method and supports a local bus…

The SWITCH SFN 4TX/FX is designed for industrial applications, equipped with 4 TP RJ45 ports and 1 FO port that supports a maximum transmission speed of 100 Mbps in full duplex mode. This device…

The Digital Output Terminal Module is designed for inline applications, offering 16 digital outputs at 24 V DC with a maximum current capacity of 500 mA. It utilizes a robust 3-conductor connection…

The RIF-2-RSC-LDP-125DC/4X21 is a pre-assembled relay module designed for universal applications. It integrates a relay base and power contact relay with a retaining bracket, facilitating easy…

The TC-2KS50-DO32-EX-PR-CS is a termination carrier designed to facilitate redundant connections for 32 MACX Analog Ex i solenoid drivers to the digital output cards of the Yokogawa Centum VP…

The relay module is designed for integration with Honeywell C300 output modules, featuring 16 channels for versatile applications. Control is facilitated via a 37-pos. D-SUB or 50-pos. FLK connector…

The relay module, designated as RIF-0-RPT-12DC/21AU , is designed for universal applications and utilizes a Push-in connection method. It consists of a relay base equipped with an ejector and a…

The Inline Analog Input Terminal, designated as IB IL AI 4/EF-PAC, is engineered for industrial applications, featuring four analog inputs capable of handling various signal ranges such as 0 V to 5…

The Digital I/O Module AXL E ETH DIO16 M12 6P is designed for industrial applications, offering a robust solution for digital input and output management. With 16 digital inputs operating at 24 V DC…

The Relay Module PLC-RPT- 24UC/21AU/MS integrates a PLC-BPT.../21 basic terminal block equipped with a Push-in connection and a plug-in miniature relay. It operates at a nominal input voltage of 24 V…

The PLC-RPT- 24DC/21HC/MS is a relay module designed for use in PLC interfaces. It comprises a relay base and a pluggable power contact relay, allowing for manual operation. The module integrates a…

The PLC-OSC-230UC/ 48DC/100/SEN solid-state relay module serves as a PLC interface for input functions. It comprises a PLC-BSC.../SEN basic terminal block equipped with a screw connection and a…

The relay module PLC-RPT-230UC/21HC is designed for applications involving high continuous currents, incorporating a PLC-BPT.../21 HC basic terminal block with a Push-in connection system. It is…