Utensili e accessori Phoenix Contact

The product is a directional antenna designated as RAD-ISM-900-ANT-YAGI-3-N, designed for operation within the 868 MHz to 900 MHz frequency range. It features a gain of 5 dBi and utilizes linear…

The UCS SW 195-H 7035 side panel is compatible with universal housing half shells of dimensions 237 x 195 mm and 195 x 145 mm. It is constructed from polycarbonate, with a thickness of 2 mm, and…

The UCS SW 237-F 7035 side panel is designed for universal housings with dimensions of 237 x 195 mm. This panel has a thickness of 2 mm and a total height of 47 mm, making it suitable for various…

The conductor marking collar, designated as UCT-WMS 4,7 (12X5,5), is engineered for slide-on mounting and is suitable for terminal block widths of 5.2 mm. It accommodates cable diameters ranging from…

This DIN rail connector, identified by the designation code UMSTBVK 2,5/ 6-GF-5,08, is engineered for reliable electrical connections. It supports a nominal cross section of 2.5 mm² and is capable of…

The contact insert VC-D4-BU65-PE is categorized under the VARIOCON range and is specifically designed as type VC4. Constructed from polyamide, this insert is presented in black and accommodates 65…

The Device Connector Front Mounting M17 7+PE is designed for use in power applications. With a total of 8 positions, including 7 pins and a protective earth (PE), this connector supports a nominal…

The Connector set HC-EVO-A10PT-BWS-HH-M20-PLRBK is designed to offer reliable connectivity with a degree of protection of IP66, ensuring resistance to dust and water ingress. It supports 10 positions…

The SACC-DSI-FSD-4CON-L180/SH GN is a 4-position device connector designed for rear mounting with an M12 SPEEDCON interface. This connector is equipped with a green contact carrier and is shielded to…

The PLD M 260 W-85/95 365/D40 is a specialized LED machine light designed for industrial applications. With a supply voltage of 24 V DC and a current consumption of approximately 0.44 A, it provides…

This plug, designated as SPB 2,5/ 1-R BU, operates at a nominal voltage of 500 V and supports a maximum load current of 24 A when using a 4 mm² conductor cross-section. It features a single position…

The SACC-CIP-M8FS-6P SMD SH R32 is a flush-type connector designed for SMD applications, featuring a straight socket configuration with 6 positions. This component complies with RoHS II standards…

The coupler connector features an M23 design with a straight configuration and is shielded for enhanced performance. It accommodates six positions with a pin contact type and utilizes a crimp…

The DFK-PC 5/11-GF-SH-7,62 is designed as a feed-through header featuring 11 connections and a nominal current capacity of 41 A. The component operates at a rated voltage of 630 V and is…

The surge protection device, designated as PT-IQ-4X1-24DC-PT , is designed for reliable protection in electrical installations. It incorporates a protective plug and a base element, along with a…

The marking foil is specifically designed for use with zack marker strips and is available in a transparent format. It can be customized according to customer specifications and is compatible with…

The snap-in markers, designated as US-EMP (70X15) YE , are designed for efficient labeling applications. These markers, made from PVC, have a size of 70 mm in width and 15 mm in height, with a slim…

The ZB 17:UNBEDRUCKT marker strip is a white, unlabeled strip designed for terminal blocks with a width of 17 mm. It can accommodate labels from systems such as PLOTMARK and CMS-P1-PLOTTER . Each…

The surge protection plug TTC-6P-3-5DC-I-P is equipped with an integrated status indicator, allowing for effective monitoring of a 3-wire floating signal circuit. With a nominal voltage of 5 V DC and…

The QPD C4X2,5/2X9-14 GY conductor connectors utilize a QUICKON connection, designed for wire sizes ranging from 1 mm² to 2.5 mm². With a compact size of 30 mm in width and height, and a length of…