Phoenix Contact Ricambi per Automazione Industriale

The FL SWITCH 4824E-4GC is a managed Ethernet switch suitable for industrial applications, adhering to IEC 61850-3 and IEEE 1613 standards. It features 24 RJ45 ports supporting transmission speeds of 10/100 Mbps and four gigabit combo ports that can accommodate both 10/100/1000 Mbps RJ45 connections and fiber optic connections requiring a 1000 Mbps SFP module.With a rack-mountable design, this switch is optimized for operation within a 19-inch rack system. It measures 442 mm in width, 44 mm in height, and 375 mm in depth, making it compact for various installation environments. The device operates effectively within a temperature range of -40 °C to 70 °C and supports an ambient humidity level of 5% to 95% non-condensing.The switch's redundancy features include Extended Ring redundancy, which enhances network reliability. It supports advanced network management functions such as IGMP snooping, VLAN tagging, and security protocols including SNMP V3 and HTTPS. Diagnostic indicators are provided through status LEDs for link and activity monitoring per port, as well as redundant voltage supply indicators.Additional technical specifications include a Mean Time To Failure (MTTF) of 17.2 years at 25 °C, and a degree of protection rated at IP20, ensuring durability in industrial settings.

The PTFIX 6/6X2,5-NS35 RD distribution block is designed for efficient electrical connectivity, supporting a nominal voltage of 690 V and a nominal current of 24 A. It employs a push-in connection method, accommodating conductor cross-sections ranging from 0.14 mm² to 4 mm² for load contacts, and a rated cross section of 6 mm² for line contacts, with a broader range of 0.5 mm² to 10 mm² available. This block is capable of bridging with others via the conductor shaft, allowing for modular expansions with corresponding plug-in bridges that can be found in the accessories section. It is compatible with mounting types NS 35/7.5 and NS 35/15, and is available in a red color (RAL 3001). Constructed with a maximum load current of 57 A for a 10 mm² conductor cross-section, the distribution block also features a maximum total current rating of 57 A. The device is compliant with IEC 60947-7-1 standards, ensuring reliability in various applications. With a compact design, its dimensions are 28.6 mm in width and 58.1 mm in height, while the depth varies between 30.4 mm on NS 15 and 32.4 mm on NS 35/7.5. The block operates effectively within a temperature range of -60 °C to 110 °C, making it suitable for challenging environments.

The Phoenix Contact SOL-SC-2ST-0-DC-2MPPT-1000SE String Combiner Box (SCB) is a crucial component in photovoltaic systems, designed to handle high voltage DC up to 1000 V. This product is specifically engineered for connecting 2x 2 strings, ensuring optimal performance and safety.One of the key features of this string combiner box is its surge protection, which is categorized as type 1/2. This feature safeguards the system against voltage surges that could potentially damage the components or disrupt the system's operation.The SOL-SC-2ST-0-DC-2MPPT-1000SE also boasts Push-in connections for both the input and output sides. This design choice enhances ease of installation and maintenance, as it eliminates the need for traditional screw terminals.

The distribution block, designated as PTFIX 6/12X2,5-NS35A VT, supports bridging between blocks via a conductor shaft. This model is designed with a horizontal configuration and includes an integrated supply. It operates at a nominal voltage of 690 V and is rated for a nominal current of 24 A. The connection method is a push-in system, suitable for load contacts with a cross-section range of 0.14 mm² to 4 mm² and a rated cross-section of 6 mm². In terms of construction, the block adheres to mounting types NS 35/7.5 and NS 35/15, and is colored violet. It features 13 connections per level, and is capable of handling flexible conductor cross-sections from 0.5 mm² to 10 mm². The rated surge voltage is 8 kV, and it is classified under overvoltage category III with a degree of pollution of 3. The product is compliant with IEC 60947-7-1 standards and has a maximum load current of 57 A based on a 10 mm² conductor cross-section. It is suitable for various applications, including service entrance, and can withstand ambient temperatures ranging from -60 °C to 110 °C. The block is designed for reliable performance in industrial environments, having passed stringent fire protection and flammability tests according to relevant standards.

The Relay Module PLC-RPT- 24UC/21AU/MS integrates a PLC-BPT.../21 basic terminal block equipped with a Push-in connection and a plug-in miniature relay. It operates at a nominal input voltage of 24 V AC/DC, with an input voltage range from 19.4 V to 33.6 V AC/DC at 20 °C. This module supports a maximum power dissipation of 0.26 W and features a changeover contact configuration. Designed for durability, it has a mechanical service life of 2x107 cycles and is rated for a typical response time of 6 ms and release time of 15 ms. The relay's contact material consists of AgSnO with hard gold plating, ensuring reliable performance with a maximum switching voltage of 250 V AC/DC. With a width of 6.2 mm, height of 80 mm, and depth of 94 mm, this module is compact yet functional. It is compliant with the IEC 60664 standard and features an IP20 degree of protection for the relay base. The ambient operating temperature ranges from -40 °C to 60 °C, and it is suitable for various harsh environments as indicated by its classification under ISA-S71.04. G3.

The TSPC 5/6-STF-7.62mm Female PCB Connector is a high-performance electrical component designed for reliable power distribution in various industrial applications. It features a nominal cross-sectional area of 6 mm², ensuring efficient current flow while maintaining safety standards. The connector's color is green, making it easily distinguishable from other components. With a rated voltage of 1000 V (III/2) and a nominal current capacity of 41 A, this connector can handle demanding electrical loads without compromising on performance. The contact surface is made of tin, enhancing conductivity and durability. The female connector type allows for secure connections with other components. The connector has a single row design with six positions, providing ample space for multiple connections. It supports twelve connections in total, ensuring versatility and adaptability to various system configurations. This product falls under the TSPC 5/..-STF range, indicating its compatibility with other components from this series. The connector features a push-in spring connection method for easy installation, with a conductor/PCB connection direction of 0° for optimal alignment. It does not come with a locking clip, simplifying the assembly process. The plug-in system is COMBICON PC 5, ensuring compatibility with other Phoenix Contact products. The connector is equipped with screw locking and mounting options, allowing for secure installation in various environments. It comes packed in cardboard, ready for immediate use upon delivery.

Feed-through terminal block, nom. voltage: 800 V, nominal current: 32 A, connection method: Spring-cage connection, Rated cross section: 4 mm², cross section: 0.08 mm² - 6 mm², mounting type: NS 35/7,5, NS 35/15, color: gray

Introducing our DIN-rail Mountable Relay Module, an essential component for enhancing the functionality of PLC interfaces. This module is designed to be easily mounted on a DIN rail, providing a secure and efficient solution for your industrial automation needs.The relay module boasts a robust basic terminal block with screw connection, ensuring reliable electrical connections. It also features a plug-in relay with power contact and 2 changeover contacts, offering versatile functionality to suit various applications.With a 12 V DC input voltage, this module is designed for optimal performance in a wide range of industrial environments. It is approved according to ATEX/IECEx (Zone 2) and Ex Zone Class I, Div. 2, ensuring compliance with the highest safety standards.

The PTFIX 6/18X2,5-NS15A RD is designed for effective electrical distribution, allowing for bridging between blocks via the conductor shaft. It is equipped with a horizontal alignment and integrated supply, supporting a nominal voltage of 690 V and a nominal current rating of 24 A. The connection method utilizes push-in technology, with versatile cross-sectional compatibility ranging from 0.14 mm² to 10 mm².In terms of physical dimensions, this block has a width of 56.5 mm, height of 28.6 mm, and depth of 31.4 mm, suitable for NS 15 mounting types. The rated cross section is optimized at 6 mm², ensuring efficient current handling. The unit is marked in red (RAL 3001) and constructed from PA insulating material, rated for temperatures between -60 °C and 110 °C.The block accommodates up to 19 connections per level with a maximum load current of 57 A at a 10 mm² conductor cross section. Notably, it meets rigorous standards, including IEC 60947-7-1, and features a flammability rating of V0 according to UL 94. Enhanced testing parameters confirm its resilience under various operational conditions.

The 12X1,5-G BU distribution block is designed for efficient connectivity and can be interconnected via the conductor shaft, allowing for flexible configurations with corresponding plug-in bridges available as accessories. It operates at a nominal voltage of 450 V and supports a nominal current of 17.5 A, with a maximum load current of 22 A and total current capacity of 26 A. Utilizing a push-in connection method, this block accommodates conductor cross sections between 0.14 mm² and 2.5 mm², facilitating a variety of installation scenarios. The mounting type is adhesive, and the unit is colored blue (RAL 5015), ensuring visibility in applications. With dimensions of 24.9 mm in width, 21.6 mm in height, and 18.7 mm in depth, this distribution block is compact and easy to integrate. The ambient operating temperature range is between -35 °C and 110 °C, while storage and transport conditions can vary from -25 °C to 60 °C, ensuring reliability across diverse environments. The insulation material is PA, rated for flammability according to UL 94 as V0, and meets various fire protection standards, making it suitable for rail vehicles as well.PTFIX 12X1,5-G BU

The rear mounting device connector, identified by Designation Code SACC-DSI-M12FSL4FEM16/0,2GR-1,5, is designed for power applications. It incorporates a 5-position, flush-type female connector that adheres to M12 standards, facilitating a reliable connection.Constructed with a cable length of 0.2 m, this connector uses individual wires with a cross-section of 1.31 mm², suitable for use with UL/cUL stranded hook-up wire. The contact connection method employs crimp connections, ensuring effective and secure electrical contact. The connector features an M16 x 1.5 rear mounting design and is equipped with a standard locking mechanism.With an operational temperature range of -40 °C to 105 °C for fixed installations, it maintains performance under various environmental conditions. The connector also meets IP65 protection standards, making it suitable for environments where dust and water ingress may occur. Its materials include a GD-Zn housing with a nickel surface, ensuring durability and resistance to corrosion.This connector is rated for a nominal voltage of 63 V DC and a nominal current of 12 A, with an overvoltage category of III and a degree of pollution rated at 3. The contact materials consist of copper-zinc with a gold surface finish, providing optimal conductivity. Additionally, the connector is halogen-free and meets flame resistance requirements according to UL 1581 VW1.

The sensor/actuator interface, designated as SACB-8/16-L- 5,0PUR SCO P NPN, utilizes an M12-SPEEDCON socket for connectivity. This unit comprises 8 slots, each accommodating a maximum of 4 A, facilitating a total rated current of 12 A. It supports standard A coding with a double slot assignment, enabling efficient signal management.The interface is furnished with a status display and features a fixed connection at 180° utilizing PUR/PVC materials. The cable extends to a length of 5 m, providing significant versatility in application settings. Notably, the unit does not include shielding, which is pertinent for specific installation environments.Designed for operational reliability, the interface operates within a voltage range of up to 30 V DC, with a nominal voltage of 24 V DC. Local diagnostics are made accessible through a green LED that indicates supply voltage status. To ensure compliance with installation requirements, unused slots must be sealed prior to commissioning, with suitable sealing elements available as accessories.Manufactured in Germany, the product adheres to industry standards, including IEC 61076-2-101, and offers a degree of protection rated at IP65, making it suitable for various industrial applications. The ambient operational temperature ranges from -25 °C to 80 °C, ensuring functionality across diverse environments.

The PTFIX 12X1,5 PK distribution block is designed for efficient bridging between multiple units via the conductor shaft. With a nominal voltage of 450 V and a maximum current capacity of 17.5 A, it supports push-in connections suitable for cross-sectional areas ranging from 0.14 mm² to 2.5 mm². This unit is compatible with standard DIN rail adapters and can be directly mounted with a flange or hung freely. The block features twelve connections in a single row, providing a streamlined solution for electrical connections. Its construction allows for operation in a wide ambient temperature range of -60 °C to 110 °C, accommodating various application needs. Notably, the distribution block is designed in a pink hue (RAL 3014) and meets several safety standards, including overvoltage category III and a rated surge voltage of 6 kV. It is built with materials that ensure compliance with flammability ratings and smoke toxicity standards.

Safety-related digital output module, IP20 degree of protection, for SafetyBridge, INTERBUS-Safety, and PROFIsafe systems. The module has four safe digital outputs for two-channel assignment or eight safe digital outputs for single-channel assignment

This front adapter, designated as FLK 50-PA/EZ-DR/HF/KS/2500/YUC, is equipped with a halogen-free round cable designed for reliable connectivity with Yokogawa controllers. The cable extends to a length of 25 m, facilitating versatile installation options.Constructed for durability, the adapter is compliant with IEC 60603-13 standards and supports an operating voltage of up to 30 V DC. It features a 50-position socket strip that allows for a maximum current of 500 mA per path, ensuring efficient data transfer. The design includes an external cable diameter of 11 mm and a pitch of 2.54 mm, optimizing spatial efficiency.The assembly consists of tin-plated copper litz wires, which contribute to its enhanced conductivity, while the halogen-free material promotes safety in diverse environments. This adapter is rated for operation between -40 °C and 70 °C for fixed installations, and -10 °C to 70 °C for flexible installations, making it suitable for various industrial applications.For installation, adherence to the outlined specifications is crucial, particularly when interfacing with third-party products.

The marking foil for the zack marker strip, designated as TML (EX3,8)R, comes in a white, unlabeled format that can be customized using various compatible labeling systems including THERMOMARK ROLL 2.0 and THERMOMARK ROLLMASTER 300/600. It is specifically designed for terminal blocks with a width of 30,000 mm and features a lettering field measuring 30,000 mm in length and 3.8 mm in height.Constructed from polyester, this foil possesses a thickness of 53 µm and is backed with an acrylic adhesive that provides a strength of 20 µm. The product can operate effectively within an ambient temperature range of -40 °C to 150 °C and is RoHS compliant. Optimal storage conditions are recommended to be at 23 °C with 50% relative humidity, ideally kept in its original packaging before use.Additional technical features include a test duration of 96 hours as per DIN EN IEC 60068-2-11 standards, confirming its resilience to various substances including isopropanol and n-hexane. The roll contains 12 individual labels and is designed to meet wipe resistance as specified by DIN EN 61010-1.

The device marker, designated as LS-EMLP (22X22) WH, is designed for customizable labeling applications. It features a white sheet with dimensions of 22 mm in both length and width, capable of being labeled using TOPMARK NEO or TOPMARK LASER. This product includes 56 individual labels per sheet, ensuring ample supply for various marking needs.Constructed from ABS, this marker exhibits a foil strength of 800 µm and an adhesive strength of 50 µm, utilizing acrylic adhesive for secure mounting. It operates effectively under ambient temperatures ranging from -20 °C to 85 °C. Storage conditions are recommended to be at 23 °C with 50% relative humidity, in a dry and dark environment within the original packaging.The product has been subjected to rigorous testing for wipe resistance according to DIN EN 61010-1 (VDE 0411-1) standards, passing all necessary evaluations for various solvents, including isopropanol and ethanol. Furthermore, it meets the requirements of LABS conformity, ensuring it is free from silicone and halogen. Weight per piece, including packaging, is 38.6 g.

The support bracket, designated as AB-UTI 6/3, is engineered for mounting busbars with a pitch of 200 mm. It measures 97.4 mm in length, 2.2 mm in width, and 51.2 mm in height, accommodating a single position. The component is manufactured in Poland and features a blue color (RAL 5015).Constructed from PA material, this bracket exhibits a flammability rating of V0 according to UL 94, ensuring safety in various applications. It operates effectively in ambient temperatures ranging from -60 °C to 105 °C, with a storage and transport temperature limit of -25 °C to 60 °C. The bracket is suitable for installation on NS 35/7.5 and NS 35/15 rails, with specific depths of 51.5 mm and 59 mm, respectively.Additional characteristics include a relative insulation material temperature index of 130 °C and compliance with multiple fire protection standards for rail vehicles (DIN EN 45545-2), classified as HL 1 to HL 3. The bracket also passes smoke gas toxicity tests and maintains operational integrity in humid conditions of 30% to 70%.

The PTFIX 18X4-NS35 OG distribution block is designed for vertical mounting and facilitates bridging through its conductor shaft, enhancing connectivity options. It operates under a nominal voltage of 800 V and supports a maximum current of 32 A, utilizing a push-in connection method. The block accommodates conductor cross sections ranging from 0.2 mm² to 6 mm², making it versatile for various applications.Constructed from PA insulating material, this component is compliant with IEC 60947-7-1 standards and is rated with a degree of pollution of 3 and overvoltage category III. It exhibits a rated surge voltage of 6 kV and a maximum load current of 41 A, ensuring reliability under demanding conditions.The distribution block's dimensions include a width of 28.6 mm, a height of 58.1 mm, and a depth that varies depending on the mounting type, specifically 30.4 mm on NS 15 and 32.4 mm on NS 35/7.5. It comes in an orange color (RAL 2003) and has passed stringent fire protection tests for rail vehicles.

The UMSTBVK 2,5/ 7-GF-5,08 is a DIN rail mounting connector designed for efficient electrical connections. It has a nominal cross section of 2.5 mm² and is constructed with a green housing. With a nominal current rating of 12 A and a rated voltage of 320 V, this connector is suitable for various industrial applications.The device utilizes a screw connection method with a tension sleeve and features seven potential connections in a single row, making it versatile for multiple configurations. Its pitch measures 5.08 mm, and it is compliant with the COMBICON MSTB 2,5 plug-in system. The connection direction is set at 0 °, allowing for straightforward integration into existing setups.Manufactured in Germany, the product is packaged in cardboard and includes features such as screw locking for secure connections. Additional specifications include a contact resistance of 2.9 mΩ and a range of conductor cross-section compatibility, from 0.2 mm² to 2.5 mm² for both rigid and flexible conductors. The connector is designed to withstand ambient temperatures ranging from -40 °C to 100 °C, ensuring reliability in harsh environments.