Phoenix Contact Ricambi per Automazione Industriale

The RIF-2-RSC-LDP-125DC/4X21 is a pre-assembled relay module designed for universal applications. It integrates a relay base and power contact relay with a retaining bracket, facilitating easy installation. The module supports an input voltage of 125 V DC, with a functional input voltage range from 100 V DC to 156.25 V DC at 20 °C.Featuring 4 changeover contacts, the relay operates with a typical input current of 7.5 mA and a response time of approximately 13 ms. The relay's mechanical service life is rated at around 2x 107 cycles, ensuring long-term reliability.With a rated insulation voltage of 250 V AC and a maximum switching voltage of 250 V AC/DC, this module is well-suited for various electrical applications. It includes protective features such as a freewheeling diode and operates within an ambient temperature range of -40 °C to 60 °C. The degree of protection for the relay base is rated at IP20.This product adheres to the standards set by IEC 60947-5-1, ensuring compliance for industrial use.

The BL2 BPC 1501E-W-64-W10 is a fanless industrial box PC designed for reliable operation in challenging environments, with an IP30 protection rating. It is equipped with an energy-efficient Intel® Celeron® N3350 processor, capable of operating at frequencies of 1.10 to 2.4 GHz. The unit includes 32 GB of eMMC internal storage and a 64 GB M.2 SSD for enhanced data handling capabilities. This device supports a variety of industrial applications and features two COM ports, making it suitable for diverse communication needs. The operating system is Windows® 10 IoT Enterprise LTSC 2019 (64-bit), which offers multi-language support tailored for industrial environments. With a typical power consumption of 0.53 A at 24 V DC and a maximum power dissipation of 16.8 W, the box PC operates efficiently within a supply voltage range of 12 V DC to 30 V DC. Its passive cooling design ensures quiet operation while maintaining optimal performance in ambient temperatures from -20 °C to 50 °C, with storage capabilities extending from -40 °C to 85 °C. Connectivity options include dual Ethernet ports (10/100/1000 Mbps) facilitated by an Intel® I210-AT LAN chipset, ensuring robust network performance. The unit is designed for DIN rail mounting, facilitating straightforward installation in industrial settings.

The PTFIX 6/12X2,5 VT is designed for versatile applications, allowing multiple blocks to be interconnected through a conductor shaft. Its basic terminal block supports a nominal voltage of 450 V and a nominal current of 24 A, utilizing push-in connection methods. The load contact accommodates a cross-section range of 0.14 mm² to 4 mm², while the rated cross-section is set at 6 mm². For enhanced connectivity, the unit supports a flexible conductor cross-section between 0.5 mm² and 10 mm².Mounting options include direct installation with a flange, snapping onto a DIN rail adapter, or free-hanging configurations. The block has a total of 13 connections grouped in a single row, rated for overvoltage category III and a pollution degree of 3. It withstands a maximum surge voltage of 6 kV and offers a maximum power dissipation of 0.77 W under nominal conditions.Constructed from PA insulating material, this block can operate in temperatures ranging from -60 °C to 110 °C. It meets rigorous fire protection standards for rail vehicles, ensuring compliance with DIN EN 45545-2 regulations. With a width of 41 mm, height of 28.6 mm, and depth of 21.7 mm, the unit's violet color (RAL 4005) provides clear identification.

The PTFIX 18X1,5-NS15A WH distribution block features a push-in connection method, accommodating conductor cross sections ranging from 0.14 mm² to 2.5 mm². This block is designed for a nominal voltage of 500 V and can carry a maximum current of 22 A, with a total current capacity of 26 A.With a mounting type of NS 15, the block measures 37.4 mm in width, 21.6 mm in height, and 27.4 mm in depth. It allows for internal bridging through the conductor shaft, and corresponding plug-in bridges can be found among the accessories. The blocks are suitable for operation in ambient temperatures between -60 °C and 110 °C, with a humidity range of 20% to 90%.This distribution block complies with the IEC 60947-7-1 standard and exhibits a flammability rating of V0 according to UL 94. It is manufactured from PA insulating material, providing a temperature index of 125 °C and relative insulation material temperature index of 130 °C. Furthermore, it adheres to various fire protection standards for rail vehicles, ensuring safe application in demanding environments.

This socket integrates a pin connector pattern of type CF with a push-in spring connection, accommodating conductor cross-sections from 0.2 mm² to 4 mm² for solid conductors and 0.2 mm² to 2.5 mm² for flexible conductors. It is suited for mounting on a DIN rail in service interfaces or for direct mounting applications. The operating temperature range is between -20 °C and 60 °C, ensuring reliable performance under various environmental conditions.Compliance with VDE 0620-1 underscores its adherence to established standards, while its flammability rating of V0 according to UL 94 indicates a high level of fire resistance. This product also meets environmental compliance standards, including China RoHS, allowing for an unlimited environmentally friendly use period.

The 40-Pos. Front Adapter is equipped with a round cable, facilitating connections for Yokogawa controllers. It integrates a 40-position socket strip that is injection-molded on both sides. This adapter has a cable length of 3.0 m.Manufactured in Germany, the item number is 2314354. It supports an operating voltage of up to 30 V DC and features a nominal operating mode with a 100% operating factor. Each connection path can handle currents up to 500 mA when uncoiled. The adapter is compatible with the SAI143 I/O card and adheres to IEC 60603-13 standards.In terms of physical specifications, the adapter features a tightening torque of 0.5 Nm for the screw connection and is designed for over 50 insertion and withdrawal cycles. The pitch is 2.54 mm, and it has a weight of 576.5 g excluding packaging. The outer sheath is made of semi-rigid PVC, colored gray, and the cable type is a shielded round cable.This product is compliant with the UKCA certification and should be used according to the installation directive specifications. For proper operation, the ambient temperature ranges from -40 °C to 70 °C for fixed installations, and -10 °C to 70 °C for flexible installations. The adapter is not halogen-free and is rated IP20 for protection, with an installation location rating of ≥ IP54.The Designation Code for this product is FLK 40-PA/EZ-DR/KS/ 300/YUC.

The UM-KS50/32-MR/21/ADV151/SO207 is a 32-channel input relay module designed for robust connectivity and functionality. It utilizes a spring-cage connection method and provides a 50-position system connection, ensuring secure and reliable operation. This module is compatible with Yokogawa ADV 151 and ADV 161 cards, making it suitable for integration in various applications. It operates at a nominal input voltage of 24 V DC, with an input voltage range of 19.2 V DC to 26.4 V DC. Each channel typically draws 9 mA, ensuring efficient power usage. Constructed with functional insulation and rated for an overvoltage category of II, the module supports a maximum switching voltage of less than 50 V DC and a continuous current limit of 100 mA. It features a protective circuit with a freewheeling diode, enhancing the reliability of the switching operations. Additionally, the module is equipped with operational status indicators, including a green LED for operating voltage display and yellow LEDs for channel status. The weight of the module is 760 g, and its dimensions are 231 mm in width, 128 mm in height, and 58 mm in depth, with a degree of protection rated at IP00, and suitable for installation locations achieving ≥ IP54. It is essential to adhere to the specifications outlined in the installation directive for optimal performance and safety when used with third-party products.

The PTFIX 18X4-NS35 VT distribution block is designed for vertical alignment and facilitates bridging between blocks through the conductor shaft. Its specifications include a nominal voltage of 800 V and a nominal current rating of 32 A, accommodating wire cross sections ranging from 0.2 mm² to 6 mm². The push-in connection method ensures straightforward installation. Constructed from violet PA material, this block is suitable for mounting on NS 35/7.5 and NS 35/15 rails. It is compliant with the IEC 60947-7-1 standard and is rated for overvoltage category III with a rated surge voltage of 6 kV. The device supports a maximum load current of 41 A and a total current of 63 A. Significant operational parameters include a temperature range of -60 °C to 110 °C and a permissible humidity range of 20% to 90%. The block's dimensions are 28.6 mm in width and 58.1 mm in height, with a depth of 30.4 mm on NS 15 and 32.4 mm on NS 35/7.5. It meets various fire protection standards and demonstrates compliance with DIN EN 50155 requirements for rail vehicles.

Axioline F, Analog output module, Analog outputs: 4, 0 V ... 5 V, -5 V ... 5 V, 0 V ... 10 V, -10 V ... 10 V, 0 mA ... 20 mA, 4 mA ... 20 mA, connection technology: 2-conductor, transmission speed in the local bus: 100 Mbps, degree of protection: IP20, including bus base module and Axioline F connectors

The LS-EMLP-AL (60X15) BK device marker is constructed from aluminum, featuring a black unlabeled surface that can be customized with TOPMARK NEO or TOPMARK LASER. The adhesive mounting type allows for versatile installation, and it provides a lettering field dimension of 60 x 15 mm. This marker includes a total of 16 individual labels, ensuring ample supply for various applications.With dimensions of 59.7 mm in width and 14.8 mm in height, this marker meets stringent wipe resistance standards as per DIN EN 61010-1 (VDE 0411-1). It is designed to operate effectively in ambient temperatures ranging from -25 °C to 70 °C and is recommended for storage at 23 °C with 50% relative humidity. The adhesive strength is rated at 250 µm with a foil thickness of 800 µm, ensuring durability and reliability in various environments.The marker is compliant with ISO 20653:2013-02 specifications and has been tested for resistance against multiple solvents and conditions, including isopropanol and ethanol, demonstrating its robustness under various exposure scenarios.

The Panel Feed-Through ST-8EP1N8ACK04S is designed for robust applications, featuring a straight layout and SPEEDCON locking. It supports a connection profile of 5+3+PE, utilizing a pin-type contact method. The flange dimensions measure 25.75 mm x 25.75 mm, ensuring compatibility with standard mounting requirements.This component is shielded and offers a degree of protection rated at IP67, making it suitable for environments exposed to dust and moisture. The cable diameter range of 9 mm to 11 mm allows for versatile installations, while the crimp connection method ensures reliable electrical performance.Further specifications include a nominal current rating of 3.6 A and a nominal voltage of 60 V, with an overvoltage category of III. The rated surge voltage is 1.5 kV, providing additional safety in demanding applications. With an ambient operating temperature range of -40 °C to 125 °C, this panel feed-through can function effectively in extreme conditions up to an altitude of 2000 m.

3-way repeater power supply with plug-in connection technology. HART-transparent, input signal 0(4) mA ... 20 mA, output signal 0(4) mA ... 20 mA. The device can be used in both isolator and repeater power supply operation. push-in connection technology

The Type 2 surge arrester VAL-SEC-T2-2+0-120DC-FM is engineered for integration into DC power systems, complying with IEC test classification II and EN type T2. It features a two-section DIN rail module with a width of 25.4 mm, allowing for efficient installation and space management.With an operational voltage range of 100 V DC to 120 V DC, this device supports a nominal discharge current of 20 kA and a maximum discharge current of 40 kA, ensuring reliable protection against overvoltage events. The surge protection is indicated optically, and it is also equipped with a remote fault indicator contact for enhanced monitoring capabilities.This arrester's design includes a robust housing made from PA 6.6-FR 20% GF, providing a flammability rating of V-0 and a high CTI value of 600. Its operational temperature range extends from -40 °C to 80 °C, making it suitable for a variety of environmental conditions. The surge arrester is also rated for an altitude of up to 6000 m above sea level.Compliance with EN 61643-11 standards ensures its reliability and effectiveness in surge protection applications.

The PTWE 6-2/F19 test terminal strip is engineered for wall mounting and features a nominal voltage rating of 400 V. It employs a push-in connection method suitable for a single level of connections.With a rated cross section of 6 mm², it is capable of handling conductor cross sections from 0.5 mm² to 10 mm², making it versatile for various applications. The terminal strip has dimensions of 188.6 mm in width, 100 mm in height, and 56.5 mm in depth, and is constructed from gray PA insulating material.This component is rated for a maximum load current of 30 A when using a 6 mm² conductor. It adheres to VDE coded type F19 standards and includes features such as a detailed circuit diagram available in the miscellaneous downloads section.Moreover, it is designed to meet stringent safety and performance standards, including an overvoltage category of III, a rated surge voltage of 4 kV, and a test surge voltage of 5 kV. The product is compliant with IEC 60947-7-1 standards, ensuring reliable operation in various environments.

The 12X2.5 GY distribution block is engineered for reliable electrical connections, allowing bridging between blocks through the conductor shaft. It supports a nominal voltage of 450 V and has a maximum current capacity of 24 A. The push-in connection method facilitates easy installation of conductors with cross-sections ranging from 0.14 mm² to 4 mm². This component is particularly versatile in terms of mounting options; it can be snapped onto a DIN rail adapter, directly mounted with a flange, or left free-hanging. Its dimensions measure 31.5 mm in width, 28.6 mm in height, and 21.7 mm in depth, making it suitable for various installation environments. Constructed from gray PA insulating material, it is designed to operate in ambient temperatures from -60 °C to 110 °C and meets several safety standards, including IEC 60998-2-2. The block accommodates up to 12 connections per level, making it an efficient choice for complex electrical systems.PTFIX 12X2,5 GY

The PTRE 6-2/16 test terminal strip supports a nominal voltage of 400 V and utilizes a push-in connection method, suitable for a range of conductor cross sections from 0.5 mm² to 10 mm². With a single level layout, it accommodates 16 positions, allowing for up to 32 connections. Constructed for DIN rail mounting, this terminal strip measures 163 mm in width, 99.7 mm in height, and 56.5 mm in depth, with additional depth configurations for different rail types. The device is gray in color (RAL 7042) and has a weight of 490 g per piece.It is designed to operate efficiently within an ambient temperature range of -5 °C to 70 °C and can withstand storage and transport conditions from -25 °C to 60 °C. The terminal strip meets several safety standards, including an overvoltage category of III and a rated surge voltage of 4 kV, ensuring reliable performance in various applications.Moreover, the insulating material is polyamide (PA), with a temperature index of 125 °C, making it suitable for high-temperature environments. The flammability rating according to UL 94 is V0, indicating a high level of fire resistance.

The DFK-MSTBVA 2,5/ 7-G-5,08 is designed as a feed-through header with a nominal cross section of 2.5 mm² and a maximum nominal current rating of 12 A. It is constructed in green with a tin-plated contact surface, ensuring reliable electrical connections.This device accommodates 7 potentials, arranged in a single row, with a total of 7 positions and connections. The pitch measures 5.08 mm and features a linear pin layout, facilitating wave soldering during installation. Each potential is equipped with one solder pin, and the plug-in system complies with the COMBICON MSTB 2,5 standards.In terms of electrical specifications, the rated voltage is 320 V under category III/2, while the contact resistance is maintained at 2.5 mΩ. The product is compliant with WEEE/RoHS standards, ensuring it is free from whiskers as per IEC 60068-2-82/JEDEC JESD 201. The header's construction includes a PBT insulating material, classified under group IIIa, with a Comparative Tracking Index (CTI) of 225.Dimensions are as follows: width of 52.16 mm, height of 15.9 mm, and length of 18.2 mm, with a solder pin length of 3.9 mm. The product is packaged in cardboard, with a minimum order quantity of 50 pieces.

The insert strip, designated as ESL 29X8 YE, features a yellow color (RAL 1018) and is compatible with various office printing systems, specifically laser printers. The strip can be labeled and has dimensions of 29 mm in width and 8 mm in height, accommodating a lettering field size of 29 x 8 mm.Constructed from polyester, this insert strip is free from silicone and halogen, ensuring compliance with relevant industry standards. It has passed rigorous testing for wipe resistance according to DIN EN 61010-1 (VDE 0411-1), demonstrating its durability under various conditions.Operating within an ambient temperature range of -40 °C to 100 °C, the strip is designed for demanding environments. Each packing unit contains 10 pieces, with a total of 174 individual labels available, organized into rows of 6 labels each. The strip has a foil strength of 135 µm and weighs 12.6 g per piece excluding packing.

The splice box, designated as FOC-FDX20-FR19-STD12-OSP-PT9, functions as a 19" rack patch module with an IP20 protection rating. Constructed from sheet steel, it features a light grey color (RAL 7035) and is designed for splicing connections. The housing measures 480 mm in width, 44.45 mm in height, and 280 mm in depth, making it suitable for various installation scenarios.With a capacity for 24 fibers and a configuration that includes 12 module slots, this box allows for efficient organization and management of fiber optic cables. The return loss is ≥ 50 dB at both 1310 nm and 1550 nm, ensuring optimal transmission performance. Additionally, it supports insertion and withdrawal cycles of at least 500, enhancing its longevity.Designed for a temperature range of -40 °C to 85 °C during operation and storage, it is also resistant to UV radiation and halogen-free, ensuring reliable performance in diverse environments. The compact cable structure and the use of zirconia ceramics for ferrules contribute to its functionality and durability.

The IB IL 24 LPSDO 8-PAC is a digital output module tailored for safety applications within the SafetyBridge architecture. It is equipped with four safe digital outputs configured for two-channel occupancy or eight outputs for single-channel use, ensuring compliance with safety standards. With an IP20 protection class, this module is designed to operate in ambient temperatures ranging from -25 °C to 55 °C. It also supports a humidity range of 10% to 85% during operation, making it suitable for various industrial environments. The device dimensions are 48.8 mm in width, 119.8 mm in height, and 71.5 mm in depth. SafetyBridge properties allow the connection of up to three safe digital input modules, complemented by a logic memory capacity of 6 kByte. The module adheres to EMC class A product standards, ensuring reliable performance while minimizing electromagnetic interference. In terms of digital output specifications, the module provides overload and short-circuit protection, with a total output current of up to 6 A at temperatures below 50 °C, and a maximum of 4 A above 50 °C. Each output channel can handle up to 2 A, while group outputs are limited to 3 A. The supply voltage for module electronics operates at 24 V DC, with a permissible range of 19.2 V DC to 30 V DC. This product complies with several safety-related standards, including IEC 61508 and EN ISO 13849, achieving a maximum Safety Integrity Level (SIL) of 3 under two-channel configurations, while also meeting the requirements for functional safety in industrial applications.