Phoenix Contact Ricambi per Automazione Industriale

The End Cover for 161 mm Profile Housing is tailored for use with profile housings, specifically those with an internal width of 161 mm. This component includes screws and a seal, ensuring secure and reliable installation. The cover is finished in graphite gray (RAL 7024), providing a standard color option for various applications.With dimensions of 190.4 mm in width, 15 mm in length, and 161 mm in depth, this end cover fits seamlessly into the designated profile housing. It is part of the HC-ALU series, as denoted by the Designation Code HC-ALU 6-161 COVER GY, and is manufactured in Hungary. The product features a powder-coated surface and is designed for screw mounting, offering a maximum IP65 protection rating, making it suitable for a range of environmental conditions.

The ME 22,5 OT-MKDSO GN serves as the upper part of a DIN rail housing, specifically intended for PCB terminal blocks with screw connections. It measures 22.6 mm in width, 99 mm in height, and 45.85 mm in depth, and is constructed from PA material with a flammability rating of V0 according to UL 94.This housing type can accommodate up to 20 connection openings with a pitch of 3.5 mm and features a slot-type PCB mount designed for PCB thicknesses ranging from 1.4 mm to 1.8 mm. The component is not equipped with ventilation openings and consists of two housing levels on both sides.Operational temperature ranges from -40 °C to 105 °C depending on power dissipation, while storage and transport conditions allow for temperatures between -40 °C and 55 °C. It is important to note that the assembly temperature should be maintained between -5 °C and 100 °C, with a relative humidity limit of 80% during storage and transport.In terms of durability, the housing meets IP20 standards and has been subjected to rigorous testing under various conditions including shock and temperature variations. The item is produced in Germany and comes packed in units of 10.

The relay module, designated as RIF-0-RPT-12DC/21AU, is designed for universal applications and utilizes a Push-in connection method. It consists of a relay base equipped with an ejector and a multi-layer gold contact relay, providing a single changeover contact.Operating at a nominal input voltage of 12 V DC, this relay has an input voltage range from 9.6 V DC to 18 V DC at 20 °C. It has a typical input current of 16 mA and a response time of approximately 5 ms, with a release time of 8 ms. The relay can handle a maximum switching voltage of 250 V AC/DC and a limiting continuous current of 6 A.Constructed to endure around 20 million cycles, this module features a safe isolation insulation and meets overvoltage category III standards. It operates effectively in ambient temperatures ranging from -40 °C to 60 °C and can be stored between -40 °C and 85 °C.For installation, it is compatible with DIN rail mounting and can be positioned in any orientation. The relay base has a degree of protection rated at IP20, while the relay itself is classified as RT III. The model complies with IEC 60947-5-1 standards, ensuring reliability in various applications.

The SP-H 2,5/ 1-L BU plug is designed for reliable electrical connections with a nominal voltage of 500 V and a maximum load current of 24 A. This connector features a single position and utilizes a spring-cage connection method, ensuring secure and efficient wiring.It accommodates a rated cross section of 2.5 mm², while also supporting flexible conductors within a range of 0.08 mm² to 2.5 mm² and rigid conductors from 0.08 mm² to 4 mm². The plug is constructed from PA insulating material, with a temperature resistance index of 130 °C, making it suitable for various operational environments.In terms of dimensions, the connector measures 15.8 mm in height, 5.2 mm in width, and 39 mm in depth. The blue color (RAL 5015) enhances visibility and identification in installations. With a pitch of 5.2 mm, this plug is compliant with IEC 61984 standards and is rated for overvoltage category III and pollution degree 3.Furthermore, it exhibits excellent fire protection ratings for rail vehicles (DIN EN 45545-2) and passed several safety tests, including smoke gas toxicity and surface flammability according to NFPA 130 standards.

The PTFIX 10/12X4-NS35 GN distribution block utilizes a push-in connection method, facilitating efficient wiring for various applications. It has a rated cross section of 10 mm² and accommodates conductor sizes from 0.5 mm² to 10 mm², ensuring compatibility with diverse electrical setups. The block is designed for mounting on NS 35/7.5 and NS 35/15 rails, allowing for flexible installation options.With a total of 13 connections available, this distribution block is engineered for maximum performance, supporting a nominal current of 57 A and a maximum load current of 57 A when using a 10 mm² conductor cross section. The nominal voltage rated at 800 V enhances its applicability in high-voltage environments.This component is constructed from PA insulating material, providing excellent thermal stability with an operational temperature range of -60 °C to 110 °C. It meets rigorous flammability standards including UL 94 V0 and has passed smoke toxicity tests, making it suitable for critical applications such as rail vehicles.Overall, the PTFIX 10/12X4-NS35 GN distribution block combines robust construction with versatile electrical specifications, making it an ideal choice for industrial automation environments.

The Relay Module, designated as PLC-RPT-230UC/21HC/EX, is designed for DIN rail mounting and includes a basic terminal block measuring 14 mm equipped with a Push-in connection. This module supports a maximum power contact rating of 10 A and features one changeover contact, suitable for input voltages of 230 V AC or 220 V DC.It is certified according to ATEX/IECEx standards for use in Zone 2 and Ex Zone Class I, Div. 2 environments. The module is built for high continuous current applications and operates with an operating factor of 100%. Its mechanical service life is rated at 3 x 107 cycles, ensuring reliability. The relay is further characterized by a safe isolation and reinforced insulation, with an overvoltage category of III and pollution degree of 3.With a typical input current of 4.5 mA at the nominal voltage, the relay exhibits a response time of 7 ms and a release time of 10 ms. The input voltage range is from 179.4 V AC to 264.5 V AC at 20 °C. The maximum switching voltage is 250 V AC/DC and the minimum switching voltage is 12 V AC/DC at a current of 10 mA.This module's design allows for a maximum inrush current of 30 A for 300 ms, with a switching capacity of 2 A at 24 V DC. The connection method utilizes a Push-in system, accommodating conductor cross-sections from 0.14 mm² to 2.5 mm². The device is rated for ambient temperatures between -40 °C and 55 °C during operation.

The PTFIX 6X4-G BU distribution block is designed for efficient electrical connections, supporting a nominal voltage of 450 V and a maximum current of 32 A. Its push-in connection method accommodates conductor cross-sections ranging from 0.2 mm² to 6 mm², making it versatile for various applications.Each block can be interconnected through the conductor shaft, facilitating streamlined wiring configurations. The adhesive mounting type ensures secure installation, while the compact dimensions of 18.5 mm width, 28.6 mm height, and 22.7 mm depth make it suitable for limited spaces. The unit is colored blue (RAL 5015) and constructed from PA insulating material, with an operational temperature range of -35 °C to 110 °C.Designed to meet IEC 60998-2-2 standards, this block is rated for overvoltage category III and pollution degree 3, ensuring reliable performance in demanding environments. Its features include a maximum load current of 63 A, and it has passed stringent fire protection tests for rail vehicles as per DIN EN 45545-2 standards.

The DFK-IPCV 16/ 2-G-10,16 is a feed-through header designed for efficient electrical connectivity. With a nominal cross section of 16 mm² and a current rating of 76 A, this component supports a maximum voltage of 1000 V under standard conditions. The contact surface is silver-plated, ensuring reliable connectivity.This header features two potential connections, arranged in a single row with a total of two positions. The linear pin layout facilitates easy integration into various systems, while the wave soldering mounting method allows for robust assembly.Measuring 44.44 mm in width, 51.05 mm in height, and 22 mm in length, the installed height is 46.95 mm. The solder pins are 4.1 mm in length, with a pin spacing of 10.16 mm, optimized for compatibility with the COMBICON PC 16 plug-in system. This product complies with IEC 61984 standards and operates effectively within a wide temperature range of -40 °C to 100 °C, depending on the derating curve.Moreover, it is compliant with WEEE/RoHS directives and is free of whiskers as per IEC 60068-2-82/JEDEC JESD 201, ensuring it meets high safety and environmental standards.

The CRIMPFOX-M SET comprises crimping pliers and multiple dies tailored for a variety of applications. It features dies compatible with insulated cable lugs ranging from 0.5 to 2.5 mm² (1212074), non-insulated conduit lugs from 0.5 to 6 mm² (1212079), and ferrules spanning 0.25 to 10 mm² (1212080) as well as 16/25 mm² (1212081).This toolset is manufactured in Sweden and designed for universal compression, ensuring compatibility across a wide range of electrical components. The dimensions of the tool are 234 mm in length, 64 mm in width, and 31 mm in height, providing a compact profile for ease of handling. The total weight, including packaging, is approximately 851.35 g, while the weight without packaging is 843.3 g.For regulatory compliance, further information regarding California Proposition 65 can be consulted in the manufacturer's declaration available under 'Downloads'.

The Surge Protection Device DT-LAN-CAT.6+ is designed to provide surge protection in accordance with Class EA (CAT6A) standards. This device facilitates high-speed data transmission for Gigabit Ethernet, supporting rates up to 10 Gbps, and is compatible with various network types including token ring, FDDI/CDDI, ISDN, and DS1.It features an RJ45 attachment plug that is equipped with a separate grounding cable and a ground connection snap-on foot, suitable for mounting on NS 35 DIN rails. This device is optimized for Power over Ethernet (PoE++) and 4PPoE applications, functioning effectively in both 'Mode A' and 'Mode B'. The operational parameters include a maximum continuous voltage of ≤ 3.3 V DC and a rated current of ≤ 1.5 A at 25 °C.Furthermore, the surge protection device exhibits a total discharge current capacity of up to 10 kA and ensures rapid response times, with tA values of ≤ 1 ns for line-line and ≤ 100 ns for line-earth configurations. The device operates within a wide ambient temperature range of -40 °C to 70 °C and offers an IP20 protection degree, making it suitable for various industrial environments. The designation code for this product is DT-LAN-CAT.6+.

The FMC 0,5/ 3-ST-2,54 C2 is a printed-circuit board connector that accommodates a nominal cross-section of 0.5 mm². It supports a nominal current of 6 A and operates at a rated voltage of 160 V, making it suitable for various applications. The connector is designed with gold contact surfaces to enhance conductivity and reduce contact resistance, which is measured at 2.7 mΩ.This connector features a push-in spring connection method and is configured for a conductor/PCB connection direction of 0°. It has three potential connections arranged in a single row, with a pitch of 2.54 mm. The connector system is part of the COMBICON FMC 0,5 range, which allows for compatibility with MC(V) 0,5/...-G-2,54...C2 headers.Constructed from LCP insulating material, the connector is compliant with WEEE/RoHS directives and is free of whiskers, following the IEC 60068-2-82/JEDEC JESD 201 standards. The connector's packaging consists of cardboard, and it is available in a packing unit of 200 pieces. Additional features include a locking mechanism that is absent for ease of use and no mounting requirements, allowing for straightforward integration into various electronic systems.

The C-SAT-BOX is engineered for effective surge protection in antenna distribution systems utilized in satellite applications. It accommodates signals from both satellite systems and terrestrial antennas through five dedicated channels, utilizing F connectors for input and output.This device is constructed with a die-cast zinc housing, offering IP40 protection, and is designed for surface mounting. It operates within a nominal voltage of 14 V DC and features a maximum continuous operating voltage of 20 V DC.Performance specifications include a maximum pulse discharge current of 2.5 kA and a total discharge current capability of 10 kA, ensuring robust protection against surges. The device maintains a response time of less than 1 ns and an input attenuation of less than 1 dB across a frequency range of 47 MHz to 2.5 GHz, ensuring signal integrity is preserved.With a pollution degree of 2 and an overvoltage category of II, the C-SAT-BOX is suitable for various operational environments, capable of functioning in ambient temperatures ranging from -25 °C to 55 °C, and can be stored or transported in conditions between -40 °C and 80 °C. The device is compliant with EN 50083-2 standards, classified as CLASS-A, making it a reliable choice for satellite communication systems.

The marshalling panel is designed for a nominal voltage of 250 V and a nominal current of 8 A, featuring a push-in connection method. This panel supports up to eight levels of connections, with a rated cross section of 1.5 mm². The cross section range is 0.14 mm² to 2.5 mm², accommodating various conductor sizes.In terms of mounting, the panel is compatible with NS 35/7.5 and NS 35/15. It is constructed from gray insulating material (RAL 7042) and features white connection elements. The design includes an open side panel for accessibility.This product, identified by the designation code PTRV 8 /WH, exhibits a maximum load current of 8 A when using a 1.5 mm² conductor. The ambient operating temperature ranges from -60 °C to 105 °C, while storage and transport temperatures can reach between -25 °C and 60 °C for brief periods. Additionally, it meets the flammability rating of UL 94 V0.

The SACC-DSIV-FS-8CON-L90 SCO is an 8-position flush-type female connector, specifically tailored for sensor and actuator applications. This connector employs M12 SPEEDCON A-coding and is designed for rear mounting with a screw mechanism, utilizing an M12 thread.Manufactured in Germany, this device connector features anti-rotation protection and a straight solder connection method. Its housing is composed of GD-Zn with a nickel surface treatment, while the insulating body is made from PA 6.6. The connector's contacts are crafted from copper alloy with a gold surface finish, ensuring low contact resistance of ≤ 3 mΩ and high insulation resistance of ≥ 100 MΩ.Rated for a nominal voltage of 60 V and a nominal current of 4 A, the connector supports THR and wave soldering connection methods. It has an angled cable outlet and a locking mechanism based on the SPEEDCON design, providing a secure and reliable connection. The device is also IP67 rated, ensuring protection against dust and water ingress, and is operable within a temperature range of -25 °C to 85 °C.

PCB terminal block, nominal current: 17.5 A, rated voltage (III/2): 400 V, nominal cross section: 1.5 mm², number of potentials: 10, number of rows: 1, number of positions per row: 10, product range: MKDS 1,5, pitch: 5.08 mm, connection method: Screw connection with tension sleeve, screw head form: L Slotted, mounting: Wave soldering, conductor/PCB connection direction: 0 °, color: green, Pin layout: Linear pinning, Solder pin [P]: 3.5 mm, number of solder pins per potential: 1, type of packaging: packed in cardboard. The article can be aligned to create different nos. of positions!

Crimping pliers, for ferrules without insulating collar according to DIN 46228 Part 1 and ferrules with insulating collar according to DIN 46228 Part 4, 0.14 mm² ... 10 mm², unlockable pressure lock, lateral entry

The marshalling patchboard, designated as PTMC 1,5/48-3 /BU, features 48 labeled positions for organized connectivity. It supports a nominal voltage of 500 V and a nominal current of 17.5 A, making it suitable for various electrical applications. The connection method employed is a push-in style, accommodating conductor cross-sections ranging from 0.14 mm² to 2.5 mm².This unit is designed for wall mounting and is constructed in a gray color, with connection elements in blue. Its compact dimensions of 66 mm in width, 102 mm in height, and 30 mm in depth allow for efficient space utilization. The patchboard adheres to international standards, ensuring reliable performance.For safety, it features an overvoltage category of III and a degree of pollution rating of 3. The rated surge voltage reaches up to 6 kV, supporting its application in demanding environments. The device is built with materials rated for high temperatures and flammability standards, ensuring compliance with stringent fire protection regulations for rail vehicles.

The M23 device connector, designated as CA-12P2S12AD00, is designed for front mounting applications. It features a total of 12 positions and employs a pin contact type with solder connections. This connector supports a counter direction of rotation and is specifically designed for both standard and SPEEDCON interlock systems. Constructed with a shielded design, it ensures reliable performance in various environments. The connector can withstand up to 100 insertion/withdrawal cycles and is rated for a maximum current of 8 A at a voltage of 48 V AC. The degree of protection for this device is rated at IP67 when plugged in, ensuring its suitability for demanding conditions. The housing material is GD-Zn, while the rotating parts are made from CuZn, providing durability and reliability. The connection profile is M23 with a flange housing design, allowing for easy installation on a square flange with four mounting holes of Ø 3.2 mm. Additionally, this product complies with RoHS II standards without exemption 6c, ensuring it contains less than 0.1% lead.

This surge protective device, designated as VAL-SEC-T2-2+F-380DC-FM, is engineered for isolation and grounding within DC voltage systems, accommodating voltages up to 380 V DC. It features a pluggable design that eliminates leakage current, enhancing safety and reliability. The device is mountable on a DIN rail and includes a three-position base element equipped with a remote indication contact.The system comprises three temperature-monitored protective elements, each providing a status message through an optical indicator on the plug. Its construction is robust, with a maximum continuous operating voltage of 450 V DC and a nominal discharge current rating of 20 kA, ensuring effective surge protection.Notably, the surge arrester is designed to operate within a range of ambient temperatures from -40 °C to 80 °C, making it suitable for diverse environmental conditions. It meets the IEC test classification II and adheres to EN 61643-11 standards, confirming its reliability in surge protection applications. The device is also capable of withstanding shock and vibration, rated for 30g and 5g respectively.

The TC EXTENDER 6004 ETH-2S is a managed Ethernet extender designed for industrial applications, facilitating point-to-point, line, and ring structures. It achieves data transmission rates of up to 30 Mbps over distances of 20 km using in-house copper cables.This device features two SHDSL ports and includes a 4-port switch for enhanced connectivity. Diagnostics are accessible through a display and Ethernet, providing real-time monitoring of network performance.Constructed with a robust aluminum housing, the extender is rated for operation in environments with temperatures ranging from -25 °C to 60 °C, and it complies with various electromagnetic compatibility standards, ensuring reliable performance in industrial settings. It also includes replaceable surge protection, enhancing its resilience against electrical disturbances.With a supply voltage range of 10 V DC to 60 V DC and a typical current consumption of 200 mA at 24 V DC, this extender supports a variety of wiring options, ensuring flexibility for installation. The device is designed for DIN rail mounting, compatible with all 35 mm DIN rails as per EN 60715, facilitating easy integration into existing systems.