Phoenix Contact Ricambi per Automazione Industriale

M23, Cable connector, SH, straight long, shielded: yes, SPEEDCON locking, No. of pos.: 8+4+PE, type of contact: Socket, Crimp connection, cable diameter range: 7.5 mm ... 18 mm, coding:N Alternative product in accordance with RoHS II without Exemption 6c (Pb <0.1%) 1237995

This product is a four-conductor universal terminal block, designed for applications requiring high voltage and amperage. It boasts a nominal voltage rating of 500 V and a nominal current capacity of 32 A. The connection method is screw connection, 1 level, ensuring reliable electrical contact.The rated cross-sectional area of this terminal block is 4 mm², accommodating wire sizes ranging from 0.14 mm² - 6 mm². It is available in two mounting types: NS 35/7,5 and NS 35/15, ensuring versatility for various installation scenarios.Finally, this terminal block comes in a red color, making it easily distinguishable from other components in your system. Whether you're working on a power distribution panel or a control system, this product is designed to meet your needs.

The Phoenix Contact SAC-5P-MR/ 1,0-923/FS CAN SCO Bus System Cable is a versatile solution for industrial automation applications. This cable features a 5-position design with compatibility for both CANopen® and DeviceNet™ protocols. Constructed from halogen-free material, this cable is not only environmentally friendly but also resistant to heat and flame. Its silver-gray RAL 7001 color adds a sleek aesthetic to any industrial setting. The cable is shielded for enhanced signal integrity and noise reduction. It comes with angled M12 SPEEDCON plugs, coded A, that easily connect to straight M12 SPEEDCON sockets also coded A. The cable length is 1 meter, providing flexibility in installation. The connector is unshielded, ensuring a balance between signal integrity and cost-effectiveness. This bus system cable is an ideal choice for those seeking a reliable and efficient solution for their industrial automation needs.

The Ground Modular Terminal Block is designed to provide reliable electrical connections in various applications. The block's current and voltage capacity are determined by the plug used, making it versatile for different power requirements. With a nominal voltage of 500 V and a nominal current of 20 A, this terminal block can handle a wide range of electrical loads. Connection Method: The terminal block features screw connection, ensuring secure and stable electrical connections. It also has a rated cross-section of 2.5 mm², allowing for efficient heat dissipation and reduced energy loss. Mounting Options: The Ground Modular Terminal Block offers mounting options including NS 35/7.5 and NS 35/15, making it suitable for various installation scenarios. Its gray color adds to its aesthetic appeal while maintaining a professional look.

Safety-related digital input module, IP20 protection, for the SafetyBridge V3 and PROFIsafe system. The module has 8 safe digital inputs for two-channel assignment or 16 safe digital inputs for single-channel assignment.

PCB connector, nominal cross section: 2.5 mm², color: green, nominal current: 12 A, rated voltage (III/2): 320 V, contact surface: Tin, type of contact: Female connector, number of potentials: 6, number of rows: 1, number of positions: 6, number of connections: 6, product range: MSTB 2,5/..-ST, pitch: 5.08 mm, connection method: Screw connection with tension sleeve, screw head form: L Slotted, conductor/PCB connection direction: 0 °, locking clip: - Locking clip, plug-in system: COMBICON MSTB 2,5, locking: without, mounting: without, type of packaging: packed in cardboard

Complete housing for Raspberry Pi printed-circuit boards. Includes housing half shells, adhesive strips for integrating the display, side panels with openings for all relevant connections, adhesive pads for affixing the Raspberry Pi model B2 and B3 computers, screws for housing and PCB attachment; light gray housing with turquoise-blue corner inlays

The Micro Terminal MT 1.5 is a high-quality electrical component designed for reliable and efficient power distribution in industrial applications. Technical Specifications: Nominal Voltage: 400 V Nominal Current: 17.5 A Connection Method: Screw connection, 1 level Rated Cross Section: 1.5 mm² Cross Section: 0.14 mm² - 1.5 mm² Mounting Type: NS 15 Color: Gray

Safety relay for emergency stop and safety door monitoring up to SIL 3 or Cat. 4, PL e (EN ISO 13849), one- or two-channel operation, automatic or manual activation, 3 N/O contacts, 1 N/C contact, 2 N/O contacts with dropout delay of 0.2 s ... 300 s, plug-in screw terminal block

The UPBV 2,5/11 plug is engineered for applications requiring reliable electrical connections. It supports a nominal voltage of 500 V and a maximum load current of 24 A when using a conductor cross-section of 4 mm². The device accommodates a rated cross section of 2.5 mm², with a flexible conductor range from 0.14 mm² to 4 mm², making it versatile for various connectivity needs. The screw connection method ensures secure attachment, while the design features 11 positions for enhanced functionality. The plug is constructed from PA material, offering a temperature index of insulation material rated at 130 °C and suitable for operation in environments as low as -60 °C. With a compact footprint of 57.2 mm in width, 20.5 mm in height, and 47 mm in depth, it is designed for efficient integration into tight spaces. The gray color (RAL 7042) provides a neutral appearance. The UPBV 2,5/11 also meets various fire protection standards, ensuring safety in rail vehicle applications.

PCB terminal block, nominal current: 32 A, rated voltage (III/2): 630 V, nominal cross section: 4 mm², number of potentials: 3, number of rows: 1, number of positions per row: 3, product range: MKDS 5, pitch: 6.35 mm, connection method: Screw connection with tension sleeve, mounting: Wave soldering, conductor/PCB connection direction: 0 °, color: green, Pin layout: Linear pinning, Solder pin [P]: 5.1 mm, number of solder pins per potential: 1, type of packaging: packed in cardboard. The article can be aligned to create different nos. of positions!

Assembled shielded round cable; connection 1: Single wires (9-position) (The wires are marked and fitted with ferrules. The braided shield is routed to a separate cable end.); connection 2: D-SUB socket strip (1x 9-position); cable length: 3 m

PCB headers, nominal cross section: 2.5 mm², color: green, nominal current: 12 A, rated voltage (III/2): 320 V, contact surface: Tin, type of contact: Male connector, number of potentials: 5, number of rows: 1, number of positions: 5, number of connections: 5, product range: MSTBVA 2,5/..-G, pitch: 5 mm, mounting: Wave soldering, pin layout: Linear pinning, solder pin [P]: 3.9 mm, number of solder pins per potential: 1, plug-in system: COMBICON MSTB 2,5, Pin connector pattern alignment: Standard, locking: without, mounting: without, type of packaging: packed in cardboard

The M12 Straight Socket Power Connector with Screw Connection is designed for power applications, offering a reliable and secure connection solution. This product features a 4-position design, ensuring efficient power distribution. The connector is made from a robust zinc die-cast material, providing durability and resistance to corrosion. It also includes a nickel-plated finish for enhanced electrical conductivity and longevity.The connector is equipped with a cable gland Pg11, which accommodates external cables with diameters ranging from 8 mm to 10 mm. This allows for versatile application in various power distribution systems. The connector is rated for AC current up to 12 A and 630 V, ensuring safe and efficient power transmission.

The Zack Marker Strip, Flat is a versatile solution for marking and labeling terminal blocks. This strip can be ordered in white color and is customizable according to customer specifications. It features a snap-fit mounting type that allows it to easily fit into flat marker grooves. The strip has a width of 6.2 mm, making it suitable for various applications. The lettering field size on each label measures 5.15 x 6.15 mm, providing ample space for clear and concise markings. With 10 individual labels included in the strip, users can easily identify and differentiate between various terminal blocks.

The PT4-MT is a knife disconnect terminal block designed for reliable electrical connections. It features a nominal voltage of 500 V and a nominal current capacity of 20 A.This terminal block utilizes a push-in connection method, ensuring easy and secure installation. The rated cross-sectional area is 4 mm², accommodating wire sizes ranging from 0.2 mm² to 6 mm².The PT4-MT is available in two mounting options: NS 35/7.5 and NS 35/15. It comes in a gray color for optimal visibility in various environments.

The marking foil for the zack marker strip, identified by the designation code TML (EX4,2)R P5 TR CUS, is a specialized product for terminal block labeling. This roll of foil measures 40 m in length and 4.2 mm in width, providing a substantial area for customized labels.Manufactured from polyester, the foil is rated for operation within an ambient temperature range of -40 °C to 150 °C. It features adhesive mounting for easy application, ensuring secure attachment to terminal blocks. Additionally, the product complies with the wipe resistance standard DIN EN 61010-1 (VDE 0411-1).With a text field width of 40000 mm and height of 4.2 mm, the foil can be labeled using various Thermomark printers, including THERMOMARK ROLL 2.0, THERMOMARK ROLL, THERMOMARK ROLL X1, and THERMOMARK ROLLMASTER 300/600. Each unit weighs 1.99 g and is sold in a minimum order quantity of one piece.

This distribution block, designated as PTFIX 10/18X4-NS35A BU, is designed for reliable electrical distribution with a nominal voltage of 800 V and a nominal current rating of 32 A. It utilizes a push-in connection method, accommodating a wide range of cross sections from 0.2 mm² to 6 mm² for load contacts and up to 10 mm² for line contacts. With a mounting type compatible with NS 35/7.5 and NS 35/15, this block is color-coded blue, ensuring visibility in various installations. The block allows for a maximum of 19 connections, organized in a single row, and is rated for overvoltage category III, making it suitable for a variety of applications. Constructed from high-quality insulating materials, the distribution block maintains performance under extreme conditions, with an operating temperature range of -60 °C to 110 °C. In terms of safety, it features a flammability rating of V0 according to UL 94 and meets multiple fire protection standards for rail vehicles.

The SP-H 2,5/1 plug is designed to operate at a nominal voltage of 500 V and supports a maximum current of 24 A. It is equipped with a spring-cage connection method, ensuring reliable contact for conductor cross-sections ranging from 0.08 mm² to 4 mm². With a rated cross section of 2.5 mm², this plug is applicable in various electrical configurations. Its dimensions include a width of 5.2 mm, height of 15.8 mm, and depth of 39 mm. The plug is manufactured in gray (RAL 7042) and meets the overvoltage category III standards. It is suitable for operation in a temperature range from -60 °C to 105 °C, with specific storage and transport conditions allowing for short durations at extreme temperatures. The insulating material is polyamide (PA), with a flammability rating according to UL 94 of V0. Additionally, it adheres to IEC 61984 standards for connection.SP-H 2,5/ 1

The LS-EMLP-AL (60X30) BK is an aluminum device marker designed for flexible labeling solutions. This black, unlabeled marker can be customized using TOPMARK NEO or TOPMARK LASER technologies. It features a practical adhesive mounting type, ensuring secure placement on various surfaces.With dimensions of 59.7 mm in width and 29.8 mm in height, the lettering field size measures 60 mm by 30 mm, providing ample space for clear identification. Each pack contains 10 individual labels, making it suitable for a range of applications.This product is built to withstand a wide temperature range from -25 °C to 70 °C, ensuring functionality in diverse environments. It adheres to DIN EN 61010-1 (VDE 0411-1) standards for wipe resistance. Furthermore, it has passed multiple tests for chemical resistance including isopropanol, ethanol, and acetone, making it a reliable choice for industrial labeling needs.