Phoenix Contact Ricambi per Automazione Industriale

The angled rotatable device connector, designated as ST-3EP1N8AAE00S, is designed for front mounting and utilizes SPEEDCON locking technology. It features a total of 3+PE positions and utilizes pin-type contacts with a diameter of 2 mm. The connector is shielded and has flange dimensions of 25 mm x 25 mm, ensuring a secure fit.Constructed with a metal housing and sealed with FPM material, it offers a degree of protection rated at IP67, making it suitable for demanding environments. The connector operates effectively within a temperature range of -40 °C to 125 °C and can function at altitudes of up to 3000 m. The connection method employed is crimp, with an overvoltage category of III, rated surge voltage of 6 kV, and a nominal voltage of 630 V.It is important to note that this connector may not be connected or disconnected under load to prevent damage to the device or injury to personnel. The device is made in Germany and has a weight of 85 g per piece.

The contact insert set, designated as VC-AR2/3M-S666-SET, is tailored for the VARIOCON series and is constructed from durable PA housing material. This insert accommodates 18 positions, allowing for a minimum conductor cross-section of 0.14 mm² and a maximum of 1.5 mm². It operates at a rated voltage of 250 V and supports a maximum current of 10 A. It is essential to note that connectors should only be connected or disconnected when not under load to prevent potential damage. The connectors possess a rated surge voltage of 4 kV and are designed for a degree of pollution rated at 3, ensuring reliable performance in various environments.With an ambient temperature range from -40 °C to 100 °C, this contact insert set is suitable for a wide array of applications. The dimensions are 65.6 mm in width, 25.5 mm in height, and 34.6 mm in length, with a weight of 48.86 g per piece. The contact surfaces are nickel-plated, contributing to its overall durability.

This 14 mm PLC basic terminal block is optimized for high continuous currents, employing a screw connection method. It is designed for mounting on DIN rail NS 35/7.5 and is equipped with a single changeover contact, operating with an input voltage of 230 V AC/DC. The item is part of the PLC-INTERFACE product family and is intended for applications requiring reliable performance under high current conditions.Constructed to comply with IEC/EN 60664-1, this component supports an operating temperature range of -40 °C to 55 °C, making it suitable for diverse environmental conditions. The terminal block also features a status display LED for operational clarity. With a compact dimension of 14 mm in width, 80 mm in height, and 94 mm in depth, it integrates seamlessly into tight spaces.Its robust design includes a protective circuit in the form of a bridge rectifier and a pollution degree rating of 3, ensuring reliability in various operational contexts. The product is manufactured in Germany and adheres to the relevant EMC and Low Voltage Directives, confirming its compliance with stringent industry standards.

The PTFIX 18X4-NS35 PK distribution block is designed for efficient electrical connections with a nominal voltage rating of 800 V and a maximum current capacity of 32 A. The block facilitates bridging between multiple units via its conductor shaft, which is compatible with specific plug-in bridging accessories.It features a vertical alignment and supports a cross-section range from 0.2 mm² to 6 mm², making it suitable for various applications. The mounting type is NS 35/7.5 or NS 35/15, and the unit is presented in a pink color.Constructed in compliance with IEC 60947-7-1 standards, this distribution block is equipped to handle a maximum load current of 41 A and a total current of 63 A. It operates effectively within a temperature range of -60 °C to 110 °C and retains functionality under varying humidity levels.

Bolt connection terminal block, nom. voltage: 1500 V, nominal current: 192 A, connection method: Bolt connection, 1 level, Rated cross section: 70 mm², mounting type: NS 35/7,5, NS 35/15, direct screw connection, color: gray

The device marker, identified by the designation code LS-EMP-AL (60X30) CUS, is constructed from aluminum and is tailored to meet specific customer requirements. With dimensions measuring 59.7 mm in width and 29.8 mm in height, the marker is designed to fit into a marker carrier through a snapped mounting type.Each marker features a designated lettering field size of 60 x 30 mm, allowing for clear identification. It is supplied with ten individual labels per unit, making it suitable for various labeling needs. The product adheres to the wipe resistance standard outlined in DIN EN 61010-1 (VDE 0411-1).This marker operates effectively in ambient temperatures ranging from -25 °C to 120 °C, although exposure to temperatures exceeding 80 °C may affect the surface material slightly. It is tested for compliance with stringent standards, ensuring resistance to various chemicals and environmental conditions. The marker is free from silicone, halogen, and cadmium, making it suitable for a wide range of industrial applications.Weighing 9.99 g, this non-returnable made-to-order item is packaged as a single piece. Its robust construction and compliance with relevant testing standards make it a reliable choice for industrial labeling applications.

The IBS RL PLUG-LK/POF-F is a high-quality bus connector designed for fiber optic bus systems. It features a polymer fiber cable and utilizes a spring-cage connection method for the power supply, ensuring a secure and reliable connection.Key Features:Polymer fiber cable for fiber optic busSpring-cage connection method for power supplyDurable and reliable designIdeal for:Industrial automationData communication systemsPower distribution networks

The Upper Housing Part U22 is specifically designed for use in DIN rail housings, conforming to the standards set forth by DIN 43880. This component features ventilation openings and has an installation depth of 22.35 mm. The dimensions are optimized for modular building installation, with a width of 53.6 mm, height of 89.7 mm, and depth of 49.78 mm.Manufactured from polycarbonate, the housing exhibits a flammability rating of V0 according to UL 94 standards and is available in light grey (RAL 7035). The product's design includes a maximum of 32 positions at a 2.5 mm pitch and accommodates two connection openings. It is intended for environments with an operational temperature range of -40 °C to 105 °C, depending on power dissipation, and can withstand storage temperatures from -40 °C to 70 °C.The assembly of the housing should be conducted in ambient conditions between -5 °C and 100 °C. The housing is equipped with six PCB holders, with a latching mount type, suitable for PCBs ranging in thickness from 1.4 mm to 1.8 mm. Additionally, it meets the IP20 protection class, ensuring effective containment within the specified environmental parameters. Consideration should be given to the application note available in the download area for optimal use. The Designation Code for reference is BC 53,6 OT U22 KMGY.

PCB connector, nominal cross section: 1.5 mm², color: green, nominal current: 8 A, rated voltage (III/2): 160 V, contact surface: Tin, type of contact: Female connector, number of potentials: 4, number of rows: 1, number of positions: 4, number of connections: 4, product range: MC 1,5/..-ST, pitch: 3.81 mm, connection method: Screw connection with tension sleeve, screw head form: L Slotted, conductor/PCB connection direction: 0 °, number of solder pins per potential: 1, plug-in system: COMBICON MC 1,5, locking: without, mounting: without, type of packaging: packed in cardboard

The Phoenix Contact SAC-4P-5,0-PUR/M12FSS PE Shielded Power Cable is a high-quality, halogen-free solution designed for reliable power distribution. This cable features an orange RAL 2003 color and advanced shielding technology to ensure optimal protection against electromagnetic interference (EMI).The cable is equipped with a free end that can be easily connected to various devices, making it versatile and adaptable for different applications. It is also designed to handle AC current up to 12 A/690 V, providing a safe and efficient power supply.

The PLC-INTERFACE, designated as PLC-OSC- 24DC/ 24DC/ 2/C1D2, is designed for DIN rail mounting and integrates a basic terminal block with screw connection and a compact solid-state relay. It operates with an input voltage of 24 V DC and provides an output ranging from 3 to 33 V DC, capable of handling continuous currents up to 3 A.This device is compliant with UL/cUL standards for use in Ex Zone Class I, Division 2 environments. It features basic insulation and is suitable for applications requiring a 100% operating factor. The input voltage can vary from 19.2 V DC to 28.8 V DC, with a typical input current of 8.5 mA at nominal conditions.Additional features include a reverse polarity protection circuit and a maximum inrush current of 15 A for short durations. The device also has a yellow LED indicator for operating voltage display, ensuring easy monitoring. It is compact, with dimensions of 6.2 mm in width, 80 mm in height, and 94 mm in depth, and is designed to operate within an ambient temperature range of -20 °C to 60 °C.

The PP-H 6/1-M GNYE plug is intended for self-assembly applications in various industries, particularly the railway sector. It operates at a nominal voltage of 1000 V and supports a maximum current of 41 A. The connection method employs a push-in configuration, facilitating straightforward assembly. This plug accommodates a rated cross section of 6 mm², with a versatile range of cross sections from 0.5 mm² to 10 mm². The component's dimensions include a width of 8.2 mm, a height of 21 mm, and a depth of 49.3 mm, all while featuring a green-yellow coloration. In terms of electrical specifications, it meets overvoltage category III standards and can handle a rated surge voltage of 8 kV. The plug is designed for a maximum power dissipation of 1.31 W under nominal conditions. It is compliant with IEC 61984 standards, ensuring safe operation when connected or disconnected without load or voltage. With an ambient operating temperature range of -60 °C to 70 °C and humidity tolerances from 20% to 90%, the plug is well-suited for diverse environmental conditions. The insulation material, made from PA, has a temperature index of 125 °C, contributing to its reliability in demanding scenarios.PP-H 6/ 1-M GNYE

The device connector front mounting, designated as ST-17S1N8AW500S, is designed for M17 applications and supports both standard and SPEEDCON interlock systems. It features a socket contact type with a crimp connection method, ensuring secure connectivity.With 17 positions available, this connector is shielded and incorporates an axial O-ring for enhanced sealing. The flange dimensions measure 25.75 mm x 25.75 mm, and it offers a degree of protection rated at IP67, making it suitable for demanding environments.This connector operates effectively across a wide temperature range of -40 °C to 125 °C and can function at altitudes up to 3000 m. The nominal current rating is 3.6 A, with a nominal voltage of 48 V AC and a rated surge voltage of 1.5 kV. The connector should not be connected or disconnected under load to prevent damage to persons or property.

The VC-TFS 6-PE contact insert is designed for use within the VARIOCON series. It is constructed from polyamide and is available in a light grey color. This insert supports a range of six positions and allows for conductor cross sections between 0.14 mm² and 1.5 mm². The rated voltage is 250 V, while the rated current is 10 A. Connections are made via a screw connection, and the type of contact is a socket.It is essential to note that connectors should only be connected or disconnected when no load is present to prevent damage. The insert measures 15 mm in width, 27.5 mm in height, and 21.8 mm in length, with a tightening torque range of 0.22 to 0.25 Nm. This product is suitable for ambient temperatures ranging from -40 °C to 100 °C, ensuring functionality across a variety of environments.

The Relay Module, identified by the designation code PLC-RSC-12DC/1/SSI, is specifically engineered for applications involving weak signal sources. This module comprises a fundamental terminal block equipped with a screw connection and a miniature relay that includes an internal amplifier circuit, ensuring reliable operation within its specified parameters.With a nominal input voltage of 12 V DC, the module supports an input voltage range of 9.6 V DC to 14.4 V DC at 20 °C, making it versatile for various applications. Its mechanical service life is rated for up to 20 million cycles, demonstrating a significant operational lifespan.Key characteristics include a single normally open (N/O) contact that can switch voltages up to 250 V AC/DC and a minimum switching voltage of 12 V AC/DC. The relay is designed with reverse polarity protection and features an operating voltage display via a yellow LED. The device is suitable for a wide range of conductor cross-sections, accommodating both rigid and flexible conductors from 0.14 mm² to 2.5 mm².For installation, it utilizes DIN rail mounting and supports various mounting positions. The relay operates effectively across a wide ambient temperature range from -25 °C to 60 °C and can withstand storage and transport conditions from -40 °C to 85 °C. Compliance with EMC and Low Voltage Directives ensures its suitability for industrial applications.

The PTFIX 2X1,5 TQ is designed as a terminal distribution block suitable for various applications. It supports a nominal voltage of 450 V and can handle a nominal current of 17.5 A, featuring a push-in connection method. The cross-section capacity ranges from 0.14 mm² to 2.5 mm², making it versatile for different conductor sizes. This component is mountable on a DIN rail adapter, allowing for direct installation with flanges and free-hanging configurations. Its dimensions include a width of 4.2 mm, height of 21.6 mm, and depth of 17.7 mm, with a striking turquoise color. Constructed in compliance with IEC 60998-2-2 standards, it offers high reliability with a rated surge voltage of 6 kV and operates effectively under an ambient temperature range of -60 °C to 110 °C. Additionally, it features a flammability rating of V0 according to UL 94, ensuring safety in various environments.

The PTFIX 10/6X4-NS35 PK distribution block is designed for applications requiring reliable electrical connections. It supports a nominal voltage of 800 V and a nominal current of 63 A. The block employs a push-in connection method for both load and line contacts, accommodating conductor cross sections from 0.2 mm² to 6 mm² and a rated cross section of 10 mm², enabling efficient power distribution. With a mounting type compatible with NS 35/7.5 and NS 35/15, this block is suitable for various installation scenarios. The unit is constructed with a pink insulating material, PA, and meets stringent flammability ratings, including V0 according to UL 94. It is also certified for fire protection in rail vehicles under DIN EN 45545-2. Notable features include a maximum power dissipation of 1.02 W under nominal conditions and a degree of pollution rated at 3, ensuring operational reliability in various environments. The block has a width of 28.6 mm, height of 58.1 mm, and a depth that measures 30.4 mm on NS 15 and 32.4 mm on NS 35/7.5. It is designed to withstand an ambient temperature range from -60 °C to 110 °C, making it suitable for both operational and storage conditions.

The device connector front mounting, designated as SM-5EPWN8AWT00, is designed for robust applications requiring a reliable connection. It accommodates a standard and SPEEDCON interlock with an M40 thread type. This model has a total of six positions, configured as 2+3+PE, utilizing pin-type contacts.Constructed with a shielded design, the connector ensures protection against environmental factors with a degree of protection rated at IP67. The flange dimensions measure 40 mm x 40 mm, facilitating straightforward installation using a front mounting/square flange method with mounting holes sized at 4x Ø4.2 mm.Manufactured in Germany, the device connector is compliant with RoHS II standards without Exemption 6c, ensuring that lead content is below 0.1%. The ambient temperature range for operation is between -40 °C and 125 °C, making it suitable for various conditions. It also features a rated surge voltage of 4 kV, providing additional safety and reliability in power applications.

This D-SUB plug features nine positions with a socket assignment of 2, 3, 5, 6, 7, and 9, and includes two cable entries at a 35° angle designed for M12 (A-coded) connections. This connector is specifically tailored for use within CAN and CANopen® bus systems, ensuring reliable data transmission. The termination resistor is provided via a separate M12 terminator.With a nominal voltage of 5 V and a current rating of 100 mA, the connector is designed to operate effectively within a temperature range of -30 °C to 80 °C. It also meets rigorous vibration resistance standards, withstanding operational vibrations of up to 5g across a frequency range of 10 to 150 Hz for 2.5 hours. Additionally, it can endure shock forces of 15g with an 11 ms period.Constructed from polyamide, this connector weighs 68.7 g and has dimensions of 79 mm in length, 16 mm in width, and 46 mm in height. The device is rated with an IP40 degree of protection, making it suitable for industrial environments. Its design adheres to the manufacturer’s specifications, which include compliance with the VDMA 24364:2018-05 standard for coatings.The designation code for this product is SUBCON-PLUS-CAN/35/M12.

The COMBI receptacle SC 2,5-RZ/ 1-L BU is designed for reliable connections with a nominal voltage of 500 V and a maximum load current of 24 A. This receptacle features a spring-cage connection method, accommodating conductor cross-sections ranging from 0.08 mm² to 4 mm². The rated cross section is set at 2.5 mm², ensuring compatibility with various wire gauges.Constructed for mounting on a plate, this blue receptacle complies with IEC 61984 standards, providing durability and safety in diverse applications. The dimensions include a width of 5.2 mm, a height of 37.2 mm, and a depth of 21.8 mm. It also features a pitch of 5.2 mm and a drill hole spacing of 5.2 mm.Designed to operate in challenging environments, the receptacle withstands ambient temperatures from -60 °C to 70 °C and maintains functionality in humid conditions ranging from 20% to 90%. With a fire protection rating according to DIN EN 45545-2, this receptacle meets stringent safety standards for rail vehicles.