Incontra i leader mondiali dell'automazione industriale ad ANEXPO 2027| Scopri di più
Categorie
Attualmente stai cercando prodotti esclusivamente correlati a Schneider Electric. Se desideri sfogliare tutti i prodotti disponibili, utilizza la nostra ricerca prodotti
Torna a:Valvole e collettoriFiltri
The subject of our discussion today is the PacDrive 3 range's offering in distribution boxes, specifically tailored for Lexium 62 ILM daisy chains. This particular distribution block boasts a unique…
Passive Connection Sub-Base ABE7 - 16 Digital Outputs with Fuses and Isolator
This passive connection sub-base, part of the Modicon ABE7 range, accommodates 16 digital output channels, each with two terminals. Operating at a control circuit voltage of 24VDC, it facilitates…
Miniature circuit breaker, Multi9 C60BPR, 2P, 6A, C curve, 10kA (UL489), 10kA (IEC/EN 60947-2)
The Miniature Circuit Breaker (MCB) Multi9 C60BPR features a two-pole configuration with a rated current of 6A and a C tripping curve. It is designed to handle a short circuit breaking capacity of up…
This connection sub-base, designated as ABE7, is engineered for distributing power to four thermocouples. It effectively manages isolated sensor power supplies using a converter while providing…
Time Delay Auxiliary Contact Block, 1NO + 1NC, On Delay 0.3-3s, Front Mounting, Spring Terminals
This time delay auxiliary contact block is engineered for compatibility with contactors LC1D and control relays CAD. It includes a configuration of 1 normally open (NO) and 1 normally closed (NC)…
The single contact block from the Harmony XB4 series features PCB terminals, allowing for straightforward integration with Harmony XB4 and XB5 control and signaling units. This design facilitates…
This limit switch contact block features a double-pole configuration with two changeover (C/O) contacts that operate simultaneously. It is compatible with ZCKJ2 limit switch bodies, which can be…
The VZN20 is an additional main pole module designed for the TeSys Vario switch-disconnector, capable of supporting a maximum of two modules per VN20 switch body. With a rated operational voltage of…
This sub-base is part of the Modicon ABE7 series, specifically designed for the Telefast pre-wired system. It accommodates 16 channels, each equipped with a switch disconnector, facilitating…
Power distribution block, 2 pole, 1 line, 1 load, 175A Cu, 135A Al, 600V
The power distribution block is designed for terminating wires in compliance with NEMA standards. It comprises a two-pole configuration with one lug opening on the line (main) side and another on the…
This passive connection sub-base is a component within the Modicon ABE7 range, specifically engineered for pre-wired system applications. It supports 16 channels, providing one terminal per channel…
The solid state input relay sub-base, identified by the model ABE7S16E2M0, is a crucial component within the Modicon ABE7 range designed for connecting pre-wired systems. It supports a control…
Power distribution block, 1 pole, 2 line, 8 load, 760A Cu, 620A Al, 600V
The power distribution block is constructed to meet NEMA standards and is suitable for terminating wires in various applications. This variant includes one pole with two lug openings on the line side…
The Multi9 C60SP functions as a low voltage miniature circuit breaker (MCB) designed for distribution applications. With a rated current of 45A and a B curve tripping characteristic, it offers…
The accessory is designed for use with PowerPact H circuit breakers, allowing for the connection of secondary disconnecting blocks that can accommodate up to nine wires each. It features a moving…
The Multi9 C60BPR is a low voltage miniature circuit breaker (MCB) designed for distribution applications. It features three protected poles and a rated current of 6A at 25 °C, complying with EN/IEC…
The auxiliary contact block is compatible with contactors LC1D and control relays CAD, providing 2 normally open (NO) and 2 normally closed (NC) contacts. Rated for operational currents up to 10A at…
The GK1EW fuse carrier block is designed for the protection of motors and transformers with a maximum rating of 50A at 690V. This unit is compatible with 14x51mm fuse links and features a front…
The auxiliary contact block is designed for front mounting and is compatible with TeSys K contactors, including models LC1K, CA2K, CA3K, and CA4K. It offers a configuration of 1NO+1NC contacts and…
The VZ4 is designed as an additional main pole module specifically for the TeSys Vario switch-disconnector system. It operates at a rated current of 80A and a voltage of 690V, allowing for enhanced…