Contattori e relè Schneider Electric

The TeSys Giga high power contactor is a robust solution for AC-3 applications up to 185A 110kW@440V. It features a wide band low consumption electronic coil (48-130V AC/DC) and an embedded highly…

TeSys K overload relays are designed to be used with TeSys K contactors to make a motor starter. These differential thermal overload relays detect over currents in the lines to the motor. When an…

LP1K0910BD is a compact 3-pole TeSys K contactor from Schneider Electric for motor applications. Rated 9A AC-3 4kW@400V, it includes a 24V DC coil and 1NO auxiliary contact allowing easy integration…

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in…

The miniature plug-in relay operates at a coil control voltage of 48V AC and is equipped with three changeover contacts (3PDT), each rated for a maximum current of 10A. Its design facilitates a…

The plug-in relay is designed with 4 changeover contacts, offering operational versatility in various applications. Each contact is configured with a common point, featuring one normally open and one…

This plug-in relay is part of the Harmony Electromechanical Relays series and operates at a control circuit voltage of 230 V AC. It is equipped with a single changeover contact (1 C/O) and supports a…

The RXM miniature relay is a component of the Harmony Electromechanical Relays series designed for various industrial applications. This relay is equipped with a 2 C/O configuration, capable of…

The miniature plug-in relay is designed for various automation applications, including industrial machinery and HVAC systems. It operates at 24V AC and supports a continuous output current of 5A…

The contactor features a 3-pole configuration (3NO) and is rated for 185A at 690V under AC-3 utilization category, making it ideal for motor applications reaching up to 90kW at 400V. It operates with…

The plug-in relay is designed with a control circuit voltage of 120V AC and incorporates 2 changeover contacts (DPDT) with a current rating of 5A . It is characterized by a compact design that allows…

This Harmony RE17R timing relay can be set between 0.1 seconds and 100 hours, has an output rating of 8A, is 17.5mm wide and can be supplied with 24V DC, 24V to 240V AC. It also has 1 changeover…

The miniature plug-in relay features a pre-assembled design and belongs to the Harmony electromechanical relays series. It is equipped with four changeover contacts (4 CO) and is rated for a…

The solid state modular relay is designed for single-phase applications and is part of the Harmony product line. With a rating of 45 A, it supports zero voltage switching, making it suitable for…

The Modicon ABE7 Relay Sub Base is part of the Schneider Electric's Telefast pre-wired system. This product offers 16 channels with 1 terminal per channel, making it an ideal choice for various…

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in…

This XPSAC safety module monitors emergency shutdown pushbuttons and limit switches. It meets the requirements of Performance Level PL e/Category 4 conforming to standard EN/ISO 13849-1 and SILCL3…

The RXM miniature relay operates at a control circuit voltage of 24 V AC with a frequency of 50/60 Hz, offering a maximum switching capacity of 1250 VA AC. Designed for installation on a RXZE socket…

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in…

The TeSys U auxiliary contact block is specifically designed for use with TeSys U starter controllers. It includes two normally open (NO) contacts, providing functionality for both open/close status…