Incontra i leader mondiali dell'automazione industriale ad ANEXPO 2027| Scopri di più
Categorie
Attualmente stai cercando prodotti esclusivamente correlati a Schneider Electric. Se desideri sfogliare tutti i prodotti disponibili, utilizza la nostra ricerca prodotti
Torna a:Quadri elettrici e alimentazioneFiltri
This XPSAC safety module monitors emergency shutdown pushbuttons and limit switches. It meets the requirements of Performance Level PL e/Category 4 conforming to standard EN/ISO 13849-1 and SILCL3…
TeSys F contactor, 3 poles (3NO), 330A/1000V AC-3, for motor applications up to 160kW@400V. Contactor with no coil to allow a later selection and installation (coil to be ordered separately), it…
Miniature circuit breaker (MCB), Multi9 C60SP, 2P, 40A, C curve, 5kA (UL1077), 10kA (IEC/EN 60947-2)
This Multi9 C60SP is a low voltage miniature circuit breaker (MCB). It is a 2P circuit breaker with 2 protected poles, 40A rated current and C tripping curve. The rated short circuit breaking…
Masterpact MTZ2 25H1 Drawout Circuit Breaker Frame, 2500A, 66 Ka/440VAC 50/60Hz
The Masterpact MTZ2 25H1 Drawout Circuit Breaker Frame is a robust solution designed to protect electrical systems from damage caused by overloads, short circuits, and equipment ground faults. This…
Illuminated push button, Harmony XB4, metal, green flush, 22mm, universal LED, plain lens, 1NO + 1NC, 24V AC DC
This Harmony XB4 illuminated modular green push button operates with a spring return mechanism, is supplied with 24V AC/DC, uses a universal LED. It has a metal bezel. This illuminated push button…
The Multi9 C60BPR is designed as a low voltage miniature circuit breaker (MCB) with a configuration of three protected poles and a rated current of 1A. It adheres to the C tripping curve, ensuring…
The switch disconnector is designed for emergency stop operations in motor applications up to 5.5kW at 400V AC-23. It features a compact design with a 60mm x 60mm base and is constructed for door…
The enclosed switch disconnector is designed for effective main and emergency stop switching in motor applications, rated for 32A at 690V. It is capable of handling loads up to 15kW at 400V under…
The Schneider Electric Harmony Electromechanical Relay Protection Accessories are designed to enhance the safety and reliability of your relay systems. Featuring a diode with a rated voltage of 6V to…
The switch disconnector MTZ2 32HF features a fixed design and operates with a rated current of 3200A. It is capable of handling a maximum operational voltage of 690VAC at 50/60Hz. The device has a…
miniature plug-in relay, 4 C/O, 6A, 110V DC with LED and lockable test button
The RXM series includes miniature plug-in relays designed for use with RXZE sockets. This specific model is configured with four changeover (C/O) contacts, supporting a maximum switching capacity of…
Miniature circuit breaker (MCB), Multi9 C60N, 2P, 25A, C curve, 10kA (IEC/EN 60947-2)
Key Features The Multi9 C60N is a 2P circuit breaker with 2 protected poles, 25A rated current and C tripping curve. It has a rated short circuit breaking capacity of 10kA at 415VAC conforming to…
This pre-assembled plug-in relay is part of the Harmony electromechanical relays range. It is equipped with two changeover contacts (2 CO) and operates at a rated operational voltage of 12V DC…
The 3-pole switch body is a crucial component of the TeSys Vario switch-disconnector from Schneider Electric, designed for use in motor applications up to 7.5kW at 400V AC-23. Rated at 25A and 690V…
Limit switch, Limit switches XC Standard, XCKMR, stay put crossed rods lever 6 mm, 2x(2 NC), slow, M20
This product is part of the XC Special range, an offer of limit switches. This limit switch is a device that converts a mechanical motion into an electrical control signal. It has 2 x (2 normally…
IEC contactor, TeSys Deca, nonreversing, 38A, 20HP at 480VAC, up to 100kA SCCR, 3 phase, 3 NO, 24VAC 50/60Hz coil, open
TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in…
TeSys Deca Manual Starter and Protector, thermal magnetic circuit protector, push buttons, 1.6...2.5 A, spring terminals
The Schneider Electric TeSys GV motor circuit breaker, designed for 3-phase motor applications, offers a robust thermal-magnetic protection mechanism with a thermal setting range of 1.6-2.5A and…
The TeSys D contactor is designed for motor control applications with a capacity of up to 50A at 690V AC-3. It features three normally open (3NO) poles and is equipped with a 60V DC control coil…
The high power contactor is designed for AC-1 applications, handling up to 330A at 440V using a 200-500V AC/DC electronic coil. With an operational capability of 600 cycles per hour and a maximum…
single phase relay, 25A, panel mount, zero voltage switching, input 3 to 32V DC, output 24 to 300V AC
The single-phase panel mount relay is designed for efficient control of resistive loads, featuring a rated current of 25A and a control voltage range of 3 to 32V DC. Its output can handle voltages…