Alimentatori e regolatori di potenza Siemens

The SINAMICS G120 PM250 is a high-power, regenerative power module designed for industrial applications. It operates at 3AC380-480V with a +10/-10% tolerance and a frequency range of 47-63Hz. This…

The SIRIUS soft starter is a versatile device designed to handle a wide range of power requirements. It offers values at 575 V and 50 °C, including 315 A for 300 hp and 546 A for 600 hp. This starter…

SINAMICS G120X Rated power: 0.75 kW At 110% 60s, 100% 240 s Radio interference suppression filter for category C2 380-480 V 3 AC +10/-20% 47-63 Hz Ambient temperature -20 to +45 °C Size: FSA Degree…

The SINAMICS G120C is a robust and versatile motor control solution, boasting a rated power of 4.0KW with an impressive 150% overload capacity for up to 3 seconds. Designed for three-phase AC…

SINAMICS G120 POWER MODULE PM240-2 WITHOUT FILTER WITH BUILT IN BRAKING CHOPPER 3AC380-480V +10/-20% 47-63HZ OUTPUT HIGH OVERLOAD: 110KW FOR 200% 3S.150% 57S.100% 240S AMBIENT TEMP -20 TO +50 DEG C…

SINAMICS g120d power module pm250d with built in cl. a filter possibility of regeneration 3AC380-480v +10/-10% 47-63HZ output high overload 4,0KW for 200% 3s,150% 60s,100% 300s ambient temp -10 to…

SINAMICS G120 MODULO DI POTENZA PM240-2 CON FILTRO INC A INCORPORATO CON CHOPPER DI FRENATA INC 3AC380-480V +10/-20% 47-63HZ USCITA ALTO SOVRACCARICO: 55KW PER 200% 3S.150% 57S.100% 240S TEMP…

The SINAMICS PM240-2 power module is designed without a filter, incorporating a built-in braking chopper for efficient operation. This module operates at 1/3AC 200-240V with a +10/-10% voltage…

MODULO DI POTENZA SINAMICS G120P PM230 CON FILTRO INTEGRATO CL. B PROTEZIONE IP55 / UL TYPE 12 3AC 380-480 V +10/-10% 47-63 HZ USCITA BASSO SOVRACCARICO: 1,1 KW PER 150% 3S. 110% 57S. 100% 240S TEMP…

L'unità SITOP UPS500S Basic è un gruppo di continuità esente da manutenzione, progettato per garantire una continuità di alimentazione affidabile per applicazioni critiche. Con un ingresso di 5 kW e…

The Siemens SITOP PS is a robust, high-performance power supply designed for stabilizing loads. It offers an impressive maximum output of 40A with a stable voltage of 24V DC. With a wide input…

SINAMICS g120 power module pm240-2 without filter with built in braking chopper 1/3AC200-240v +10/-10% 47-63HZ output high overload 0,75KW for 200% 3s,150% 57s,100% 240s ambient temp -10 to +50 deg c…

Modulo di potenza SINAMICS g120 PM250 con filtro integrato classe A, possibilità di rigenerazione 3AC380-480V +10/-10% 47-63Hz, uscita sovraccarico elevato 22 kW per 200% 3s, 150% 57s, 100% 240s…

SINAMICS v20 3AC380-480v -15/+10% 47-63HZ rated power 0.37KW with 150% overload for 60sec integrated filter c3 i/o-interface 4di, 2do,2ai,1ao fieldbus uss/ modbus rtu with inbuilt bop protection…

SINAMICS G120C RATED POWER 5,5KW WITH 150% OVERLOAD FOR 3 SEC 3AC380-480V +10/-20% 47-63HZ INTEGRATED FILTER CLASS A I/O-INTERFACE: 6DI, 2DO,1AI,1AO SAFE TORQUE OFF INTEGRATED FIELDBUS: USS/ MODBUS…

SINAMICS v20 3AC380-480v -15/+10% 47-63HZ rated power 2.2KW with 150% overload for 60sec integrated filter c3 i/o-interface 4di, 2do,2ai,1ao fieldbus uss/ modbus rtu with inbuilt bop protection IP20/…

The SINAMICS G120C, rated at 2.2KW with a 150% overload capability for 3 seconds, is designed to operate within the voltage range of 3AC380-480V with a tolerance of +10/-20%. This motor control…

The SINAMICS G120C DP is a high-performance drive system designed to deliver a rated power of 0.55KW with an overload capacity of 150% for up to 3 seconds. This drive operates at a voltage range of…

The SIRIUS Soft Starter , designed to handle up to 180A and 125HP, operates at a voltage of 690V. This starter is equipped with screw terminals for straightforward installation. It is rated for a…

The SINAMICS G120C is a high-performance drive system with a rated power of 1.1KW and an overload capacity of 150% for up to 3 seconds. It operates at 3AC380-480V with a voltage tolerance of…