SolaHD Ricambi per Automazione Industriale

Drive Isolation Transformers facilitate SCR (Silicon Control Rectifier) variable speed motor drive systems by providing magnetic isolation between the incoming line and the motor drive. These transformers also adjust the voltage to align with the SCR Drive requirements. The standard configurations include a delta primary and a wye secondary, which are compatible with the typical power sources found in three-phase rectifier circuits. This model, designated as PN DT661H27S, supports various kVA ratings ranging from 7.5 to 440 kVA. It operates on multiple input voltage ranges of 460-575 Vac and features an output voltage range of 133-460 Vac. The transformers are designed for three-phase systems and can accommodate varying drive horsepower from 5 to 400 HP. With aluminum windings, the transformers are rated for a temperature rise of +150°C, ensuring durability in demanding applications.

The Automation Transformers, designated as PN HT5F15AS, are designed for non-ventilated operation, serving a range from 50 VA to 45 kVA. These transformers are specifically constructed for deployment in hazardous locations and challenging industrial settings. Their encapsulation, combined with rugged NEMA 3R enclosures, ensures protection against dust and moisture while enhancing resistance to shock and vibration.These UL Listed transformers conform to the latest National Electrical Code standards for Class I, Division 2, Group A-D locations, contingent upon installation in accordance with NEC 501.100(B). The units are available in both single and three-phase configurations and support operational frequencies of 50 or 60 Hz. The windings are made of aluminum, contributing to their efficiency and durability.

The HZ Series industrial control transformers are specifically engineered for scenarios where external mounting outside the control panel is necessitated by thermal or economic constraints. This transformer features encapsulated copper windings tailored for industrial use. With a UL Class +180°C insulation system, it supports a temperature rise of +80°C when operating at full load.Standard configurations are UL Listed and NEMA Type 3R rated for rainproof applications, while custom options can be provided to meet UL Listed and NEMA Type 4, 4X, and 12 specifications. The transformers are available with various primary voltage options ranging from 220 to 575 volts and secondary voltage choices from 110 to 240 volts, designed for operation at 50/60 Hz.

Automation Transformers are designed for use in demanding environments, offering power ratings from 50 VA to 45 kVA. These non-ventilated transformers feature encapsulation and are housed in rugged NEMA 3R enclosures, ensuring protection against dust, moisture, and providing enhanced resistance to shock and vibration.These transformers are UL Listed and comply with the latest edition of the National Electrical Code, specifically for Class I, Division 2, Group A-D locations, provided they are installed according to NEC 501.100(B). With options for 50 or 60 Hz operation, they can be configured for either single or three-phase applications, utilizing aluminum windings to deliver reliable performance in industrial settings.

These automation transformers are designed for non-ventilated applications with power ratings ranging from 50 VA to 45 kVA. They are encapsulated and constructed to operate effectively in hazardous locations and tough industrial settings. The encapsulation process, along with rugged NEMA 3R enclosures, provides essential protection against dust and moisture, enhancing durability and resistance to shock and vibration. These transformers are UL Listed and comply with the latest National Electrical Code (NEC) for Class I, Division 2, Group A-D locations, provided they are installed according to NEC 501.100(B). Operating at either 50 or 60 Hz and available in single or three-phase configurations, these transformers utilize aluminum windings which contribute to their reliability in demanding operational conditions.

The SBE Series encapsulated copper wound transformers offer a robust solution for industrial control applications. These transformers are epoxy encapsulated, ensuring that the cores and coils are shielded from moisture, dirt, and various industrial contaminants. The design incorporates extra deep, molded terminal barriers, significantly minimizing the risk of electrical failures caused by arcing or damaged lead wires.These transformers support a range of primary voltages including 120 x 240V, 220 x 440V, and 240 x 480V with corresponding secondary voltages of 24V, 110V, and 120V. They operate efficiently at both 50Hz and 60Hz, with continuous VA ratings spanning from 50 to 1000. Notably, the SBE Series is rated for a temperature rise of +55°C, and features copper windings mounted on a durable steel plate, making them particularly well-suited for demanding industrial environments.

Drive Isolation Transformers facilitate the magnetic isolation of the incoming line from motor drives in SCR (Silicon Control Rectifier) variable speed applications. They are essential for matching the voltage requirements of the SCR drive. The typical configuration includes a delta primary with a wye secondary, aligning with the prevalent power sources used in three-phase rectifier circuits.This specific model operates with a primary voltage of 460 ∆ or 575 ∆, and secondary voltages of 266 or 133 Vac, depending on the configuration. The transformers are rated for a kVA range of 7.5 to 440 kVA and can accommodate drive horsepower from 5 to 400. The input voltage range spans 460-575 Vac, and the output voltage varies from 133 to 460 Vac. The design incorporates aluminum windings and is rated for a temperature rise of +150°C, ensuring reliable performance in demanding environments.

The automation transformers offered in this range are designed for floor mounting and feature a non-ventilated encapsulated construction. With power ratings varying from 15 kVA to 150 kVA, these transformers are suitable for use in Class I, Division 2/Zone 2 hazardous locations as well as in demanding industrial conditions. The UL Listed/NEMA Type 1, 2, 3R, 4, and 12 encapsulated enclosure ensures that these transformers are protected from dust and moisture, providing enhanced resistance to shock and vibration.These transformers comply with the latest National Electrical Code standards, ensuring reliability and safety in operation. The design includes options for aluminum or copper windings, with a frequency rating of 60 Hz and a three-phase configuration. Additionally, custom designs are available, including NEMA 4X stainless steel enclosures, low temperature copper wound options, and K-factor designs that cater to specific application needs.

The S4K2U-C and S4K2U-5C models are designed as single-phase, online uninterruptible power supplies (UPS), ensuring a continuous power supply through double conversion technology. These units are available in various capacities, specifically 500VA, 1000VA, 1500VA, 2000VA, and 3000VA, catering to both 120V and 230V applications. One of the key features of these UPSs is the zero transfer time from external to internal power sources, which guarantees that critical loads remain supported without interruption during utility power failures. The compact 2U form factor allows for flexible installation, whether in a rack or tower configuration. With a higher power factor, these UPSs also contribute to longer battery life and increased reliability, thus minimizing the total cost of ownership. The operating temperature range is specified from 0°C to +40°C, and the output voltage is user-configurable within the range of 110/115/120/127 Vac ±3%. The input voltage can handle a range from 60 to 140 Vac, operating at a frequency of 50/60 Hz.

These automation transformers are designed for non-ventilated applications, offering a power range from 50 VA to 45 kVA. They are encapsulated to ensure reliable operation in hazardous locations and challenging industrial settings. The transformers are housed in rugged NEMA 3R enclosures, providing protection against dust and moisture, as well as enhanced resistance to shock and vibration. The transformers are UL Listed and meet the latest National Electrical Code standards for Class I, Division 2, Group A-D locations when installed according to NEC 501.100(B). With options for both single and three-phase configurations, and aluminum windings, these transformers ensure versatility and reliability for various industrial applications.

The SBE Series encapsulated copper wound transformers provide reliable performance in industrial settings, featuring epoxy encapsulation that safeguards the cores and coils from moisture, dirt, and other contaminants. This design includes extra deep, molded terminal barriers to minimize the risk of electrical failures due to arcing or damaged lead wires.These transformers support multiple primary and secondary voltage configurations, including 120 x 240 Volt and 24 Volt, as well as 220 x 440 Volt with 110 Volt secondary options. They are rated for continuous VA ranging from 50 to 1000, accommodating various operational requirements. The windings are constructed from copper and mounted on a robust steel plate, ensuring durability and longevity.With a temperature rise of +55°C, these transformers are engineered for effective heat management, making them suitable for demanding industrial applications. The SBE Series is designed for 60 Hz and 50/60 Hz operations, providing versatility in different environments. For specifications, refer to Designation Code PN E100D.

The HZ Series industrial control transformers are specifically designed for scenarios where mounting within the control panel is impractical due to cost or heat constraints. This particular transformer is encapsulated and constructed with copper windings, making it suitable for a range of industrial applications. The transformer is rated for a temperature rise of +80°C under full load, supported by a UL Class +180°C insulation system. Standard configurations are UL Listed and meet NEMA Type 3R specifications, ensuring rainproof performance. Additionally, custom versions are available that comply with UL Listed/NEMA Type 4, 4X, and 12 standards, providing flexibility in installation and environmental adaptability. The transformer supports various primary voltage options from 220 to 575 volts and secondary voltage configurations between 110 and 240 volts, accommodating diverse operational requirements.

Buck-Boost Transformers offer a compact solution for adjusting voltage, providing an efficient and cost-effective method to raise or lower voltage by a small percentage. With a primary voltage of 120 x 240 Volts and secondary options of 12/24 Volts, these transformers are well-suited for applications that require specific voltage levels differing from the standard line voltage. The encapsulated design operates at 60 Hz and is available in various kVA ratings, including 0.5, 0.75, 1, 1.5, 2, 3, 5, and 7.5 kVA, ensuring compatibility with various loads. Additionally, the non-encapsulated versions cater to both 50 and 60 Hz at 0.05, 0.1, 0.15, and 0.25 kVA. Proper selection of a buck-boost transformer can enhance the performance and longevity of connected equipment. These transformers feature single-phase aluminum windings, ensuring reliable operation across multiple configurations, including 240 x 480 Volt primary with 24/48 Volt secondary options.

The SCP Series power supplies are engineered to meet the demands of industrial environments, ensuring dependable operation for a variety of control and instrumentation devices. With a compact design, these units can be mounted easily on DIN rails or chassis, facilitating installation in tight spaces. They operate within an input voltage range of 86-264 Vac and 100-375 Vdc, providing versatility for different power requirements. The output power is rated at 30W, with selectable voltage outputs of 5, 12, 15, 24, and 48 Vdc, accommodating a broad spectrum of low power devices. The operating temperature range spans from -25°C to +65°C, ensuring functionality in harsh environments. Additionally, the encapsulated IP20 construction enhances durability, while visual status indicators, including a green LED for DC OK, offer clear operational feedback. This device adheres to the Designation Code SCP102D24XC02, underscoring its specific model identification.

The SCD Series encapsulated DC to DC converters provide essential power for industrial applications where AC power is unavailable. These converters accept a broad input voltage range between 20-70 Vdc and deliver stabilized output voltage, effectively protecting sensitive devices from the voltage fluctuations common in battery-operated systems. With an output power rating of 30 W and an operating temperature range of -25°C to +65°C, the SCD30D15DN model is suitable for powering various sensors and transducers that require specific DC voltages. The output voltage can be adjusted from 5-48 Vdc, making it adaptable for diverse applications. This model is designed for easy installation, compatible with DIN TS35/7.5, TS35/15 or chassis mounting, enhancing its utility in industrial settings.

K-Factor Transformers are specifically engineered to accommodate harmonic currents generated by non-linear loads, ensuring the insulation system's temperature rating is not exceeded. This model incorporates a core and coil design that effectively manages the DC flux resulting from triplen harmonics, which can lead to overheating in standard transformers.The transformer operates with a primary voltage of 480 ∆ and a secondary voltage of 208Y/120, providing reliable performance across multiple kVA ratings, including 15, 30, 45, 75, 112.5, 150, 225, 300, and 500 kVA for Group A with a K-4 rating, Group B with a K-13 rating, and Group C with a K-20 rating. Designed for a three-phase system and rated at 60 Hz, this unit incorporates aluminum windings and maintains a temperature rise of +150°C.

The SMT Series aluminum wound open style transformers are available in ratings from 1 KVA to 5 KVA. These transformers are designed with varnished coils and operate under a class +180°C insulation system, achieving a temperature rise of +115°C at full load. The primary voltage options range from 220 to 480 volts, with secondary voltage configurations of 110, 115, or 120 volts depending on the application. Compliance with NEMA specifications ensures reliable electrical performance and regulation, offering significant cost advantages. The transformers are equipped with mounting feet for versatile installation.

K-Factor Ventilated Transformers are engineered to accommodate the harmonic currents generated by non-linear loads, ensuring that the temperature rating of the insulation system is not exceeded. This transformer model, designated as K-Factor Group A with a K-4 rating, operates with a primary voltage of 480 ∆ and a secondary voltage of 208Y/120. It is available in kVA ratings of 15, 30, 45, 75, 112.5, 150, 225, 300, and 500. The design effectively addresses the increase in stray losses that can lead to overheating and premature failure of standard transformers when subjected to non-linear loads. With a robust core and coil configuration, these transformers manage the DC flux induced by triplen harmonics, enhancing reliability. This model features a three-phase configuration, operates at a frequency of 60 Hz, and includes aluminum windings. It also has a temperature rise rating of +150°C, which is critical for applications demanding high performance under varying electrical loads.

K-Factor Transformers are engineered to accommodate harmonic currents generated by non-linear loads, effectively preventing insulation system temperature ratings from being exceeded. This design mitigates the effects of naturally occurring stray losses that can lead to significant overheating and premature failure in standard transformers.The transformer’s core and coil configuration efficiently manages DC flux resulting from triplen harmonics. Rated for Group A with K-4 specifications, the transformer operates on a 480 ∆ primary voltage with a 208Y/120 secondary voltage, and is available in various kVA ratings including 15, 30, 45, 75, 112.5, 150, 225, 300, and 500. Additionally, Group B and Group C configurations are available, with K-13 and K-20 ratings respectively, across similar voltage and kVA specifications.Designed for three-phase applications, this transformer operates at a frequency of 60 Hz and features aluminum windings with a temperature rise rating of +150°C.

The SBE Series encapsulated copper wound transformers are designed specifically for industrial control applications, offering extensive protection against moisture, dirt, and contaminants due to their epoxy encapsulation.These transformers feature deep, molded terminal barriers that minimize the risk of electrical failures caused by arcing or damaged lead wires. Their rugged construction ensures dependable performance in challenging environments.With specifications catering to various voltage configurations, including primary voltages of 120 x 240, 220 x 440, and 240 x 480 Volts, the transformers support multiple secondary voltages such as 24, 110, and 115 Volts. The SBE Series is available with continuous VA ratings ranging from 50 to 1000 VA, making it versatile for a range of industrial applications. The temperature rise for these units is rated at +55°C, and they are equipped with copper windings mounted on a steel plate.