XPSUS12AC

Complementary

Number Of Outputs

3 on/off configurable pulsed output

Height

100 mm

Mounting Support

35 mm symmetrical DIN rail

Minimum Output Voltage

12 V relay output

Minimum Output Current

10 mA relay output

[Ith] Conventional Free Air Thermal Current

8 A

Input/Output Type

semiconductor pulsed diagnostic output 24 V DC, 20 mA Z1, not safety-related

Associated Fuse Rating

10 A gG NO relay output circuit IEC 60947-1

[Uimp] Rated Impulse Withstand Voltage

4 kV II IEC 60947-1

Net Weight

0.200 kg

Type Of Start

automatic/manual/monitored

Number Of Inputs

2 safety input 24 V DC 5

Input Compatibility

normally closed circuit ISO 14119 || XC limit switch ISO 14119 || mechanical contact ISO 14119 || normally closed circuit ISO 13850 || antivalent pair ISO 14119 || OSSD pair IEC 61496-1-2 || two-hand control EN 574/ISO 13851-III A || two-hand control EN 574/ISO 13851-III C || 3-wire proximity sensors PNP

Power Consumption In Va

5.0 VA 24 V AC 50/60 Hz

[Ie] Rated Operational Current

5 A AC-1 for normally open relay contact || 3 A AC-15 for normally open relay contact || 5 A DC-1 for normally open relay contact || 3 A DC-13 for normally open relay contact || 3 A AC-1 for normally closed relay contact || 1 A AC-15 for normally closed relay contact || 3 A DC-1 for normally closed relay contact || 1 A DC-13 for normally closed relay contact

Auxiliary Contact Composition

2 NO

[Ui] Rated Insulation Voltage

250 V 2)IEC 60947-1

Power Consumption In W

2 W 24 V DC

Maximum Line Resistance

500 Ohm

Local Signalling

for power ON LED (green) || for error LED (red) || for safety output status LED (yellow) || for start input LED (yellow) || for safety input S12 LED (yellow) || for safety input S13 LED (yellow) || for safety input S22 LED (yellow) || for safety input S23 LED (yellow)

Input Protection Type

internal, electronic

Width

22.5 mm

Depth

120 mm

Synchronisation Time Between Inputs

0.5 s || 2 s || 4 s

Maximum Response Time On Input Open

20 ms

Environment

Product Certifications

TÜV || cULus

Ip Degree Of Protection

IP20 terminals)IEC 60529 || IP40 housing)IEC 60529 || IP54 mounting area)IEC 60529

Standards

IEC 60947-5-1 || IEC 61508-1 functional safety standard || IEC 61508-2 functional safety standard || IEC 61508-3 functional safety standard || IEC 61508-4 functional safety standard || IEC 61508-5 functional safety standard || IEC 61508-6 functional safety standard || IEC 61508-7 functional safety standard || ISO 13849-1 functional safety standard || IEC 62061 functional safety standard

Ambient Air Temperature For Storage

-25-85 °C

Relative Humidity

5-95 % non-condensing

Offer Sustainability

Rohs Exemption Information

Yes

Mercury Free

Yes

Environmental Disclosure

ENVPEP1811003EN

Sustainable Offer Status

Green Premium product

Pvc Free

Yes

Reach Regulation

Reference contains Substances of Very High Concern above the threshold

California Proposition 65

WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Weee

The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.

China Rohs Regulation

X

Circularity Profile

ENVEOLI1811003EN

Eu Rohs Directive

Pro-active compliance (Product out of EU RoHS legal scope)

Specifications

[Us] Rated Supply Voltage

24 V AC - 15...10 % || 24 V DC - 20...20 %

Range Of Product

Harmony Safety Automation

Product Or Component Type

safety module

Safety Module Name

XPSUS

Connections - Terminals

removable spring terminal block, 0.2...2.5 mm² solid or flexible || removable spring terminal block, 0.25...2.5 mm² flexible with ferrule single conductor || removable spring terminal block, 0.2...1.5 mm² solid or flexible twin conductor || removable spring terminal block, 2 x 0.25...1 mm² flexible with ferrule without cable end, with bezel || removable spring terminal block, 2 x 0.5...1.5 mm² flexible with ferrule with cable end, with bezel

Safety Module Application

for electrical monitoring of two-hand control stations || monitoring antivalent contacts || for emergency stop, guard and light curtain monitoring || for enabling switch monitoring

Safety Reliability Data

MTTFd > 30 years ISO 13849-1 || Dcavg >= 99 % ISO 13849-1 || PFHd = 1.13E-09 ISO 13849-1 || HFT = 1 IEC 62061 || PFHd = 1.13E-09 IEC 62061 || SFF > 99% IEC 62061 || HFT = 1 IEC 61508-1 || PFHd = 1.13E-09 IEC 61508-1 || SFF > 99% IEC 61508-1 || type = B IEC 61508-1

Electrical Circuit Type

NC pair || PNP pair || antivalent pair || OSSD pair

Function Of Module

emergency stop button with 2 NC contacts || guard monitoring with 1 or 2 limit switches || monitoring 2 PNP sensors || magnetic switch monitoring || light curtain monitoring || RFID switch || monitoring of electro-sensitive protection equipment (ESPE) || enabling switch monitoring || proximity sensor monitoring || monitoring two-hand control station

Safety Level

can reach PL e/category 4 ISO 13849-1 || can reach SILCL 3 IEC 62061 || can reach SIL 3 IEC 61508

Modelli CAD

traceparts

Scaricare