DEUTSCH

DEUTSCH DTM wedgelocks help confirm proper contact alignment within each connector. Wedgelocks are required components for all DEUTSCH DTM connectors.

DEUTSCH protective dust caps come with a mounting chain and are used to protect the connector while not mated. Dust caps are metal and available for 18 and 24 plug shell sizes.

DEUTSCH sealing plugs are non-conductive dummy pins that are inserted to fill an open cavity in a connector. Sealing plugs are required to maintain the integrity of the environmental seal.

DEUTSCH DRC backshells are designed to snap onto the back of the connectors and accept convoluted tubing. The backshells are available in straight and 90° version and are compatible with 40, 50, 60, and 70 cavity connectors.

DEUTSCH STRIKE housings feature a lever lock system and are available in 32 and 64 cavity arrangements. STRIKE housings accept DEUTSCH contacts from size 20 to 16 (7.5 and 13 amps).

DEUTSCH DTM backshells offer a high level of protection and allow convoluted tubing to nest within the rear of the backshell. Straight and 90° versions are available.

DEUTSCH DTM wedgelocks help confirm proper contact alignment within each connector. Wedgelocks are required components for all DEUTSCH DTM connectors.

DEUTSCH stamped & formed style contacts terminate wire from 10 AWG to 22 AWG (6.0 - 0.35mm2). They are available in nickel, tin, or gold plating and in multiple sizes to accommodate a wide range of wire insulation.

DEUTSCH DTM wedgelocks help confirm proper contact alignment within each connector. Wedgelocks are required components for all DEUTSCH DTM connectors.

Dust caps provide an environmental seal for HD10 receptacles with 3, 5, 6, or 9 cavities when unmated.

DEUTSCH DRC housings are rugged rectangular connectors that are available in 24-70 cavities and feature a jackscrew for mating. They accept size 16 and 20 DEUTSCH contacts that are rated for 13 and 7.5 amps.

DEUTSCH DTHD housings are available in three sizes, carrying 25, 60, or 100 amps. These single terminal connectors feature an integrated latch for mating and can be mounted or used in-line.

DEUTSCH printed circuit board enclosures are available with through hole mounting and optional venting. DEUTSCH DT and DTM snap-in headers are available in 12, 24, 36, or 48 configurations.

DEUTSCH DTP housings are available in 2 and 4 pin counts and use size 12 DEUTSCH contacts, each with 25-amp continuous capacity. DTP housings feature an integrated latch for mating.

DEUTSCH DTM wedgelocks help confirm proper contact alignment within each connector. Wedgelocks are required components for all DEUTSCH DTM connectors.

DEUTSCH DT wedgelocks help confirm proper contact alignment within each connector. Wedgelocks are required components for all DEUTSCH DT housings.

DEUTSCH DTHD housings are available in three sizes, carrying 25, 60, or 100 amps. These single terminal connectors feature an integrated latch for mating and can be mounted or used in-line.