Superstrut

Corner Fitting 90 degree, 316 Stainless Steel, Height 3-1/2 Inches, Width 5-3/8 Inches, Thickness 1/4 Inch, Hole Diameter 9/16 Inches, Number of Holes 4

Hinged Angle Bracket. 3-Holes with 2 holes on one side and 1 hole on the other side, 9/16 Inch Diameter. Steel (Q235) with GoldGalv Finish. Trivalent Chromium, RoHS Compliant, OSHA Safe. UV Stable. Will not form white rust when left outdoors. Will not chip, peel or crack. Superior corrosion resistant. Ends and punched holes are protected. Clean, paintable surface. Plating is in compliance with ASTM Specifications (B 633-85).

Channel, 14 Gauge, 1-5/8 Inch x 13/16 Inch, Length 2 Feet 2 Inches, Half Slot Pre-Galvanized Steel with 9/16 Inch x 1-1/8 Inch Slots on 2 Inch Centers

NYLON CONE NUT

Clamp, One-Piece Cable and Pipe, EMT and Rigid Conduit Trade Size 3/4 Inch, Cable Outer Diameter Range .860-1.110 Inches, Steel, Bag of 2

1-1/2 inch, Steel Riser Clamp with Hot-Dip Galvanized finish.

Brackets, 6 Inch, Hot Dipped Galvanized

Channel, 14 Gauge, 1-5/8 Inch x 13/16 Inch, Length 1 Feet 6 Inches, Half Slot Pre-Galvanized Steel with 9/16 Inch x 1-1/8 Inch Slots on 2 Inch Centers

6 inch Steel Adjustable Clevis Hanger with SilverGalv finish.

U Shape Fitting for A Series Channel. Does not include strut nut or bolts. 7-1/4 Inch Length. Hole Spacing 1-3/16 from End, 1-7/8 Inch Centers, 9/16 Inch Diameters. Width 1-5/8 Inch. 1/4 Inch Thick. Zinc coating is applied by hot-dipping after fabrication. Is in conformance with ASTM A-123, Grade 65 specification standards. Minimum of 2.5 mill thickness.

Bracket, Cantilever Channel Support, Bracket Length 9 Inches, Hole to Hole 3-1/4 Inches, Channel Length 20-1/2 Inches, Design Load 1000 Pounds, Type 316 Stainless Steel

2 inch. Malleable Iron Extension Ring Hanger with SilverGalv finish.

Five hole Steel Corner Plate with Hot-Dip Galvanized finish.

Small Pipe Roller. 1 Inch to 3 Inch pipe. Includes strut and mounting screws. Aluminum.

3 inch Malleable Iron Extension Ring Hanger with SilverGalv TM finish.

BRACKET

Cross or X Bracket. 5 Hole. 1 hole on each side and in center, 9/16 Inch Diameter. 5-3/8 Inch X 5-3/8 Inch. Thickness 1/4 Inch. 316 Stainless Steel.

Channel, 14 Gauge, 1-5/8 Inch x 13/16 Inch, Length 2 Feet 8 Inches, Half Slot Pre-Galvanized Steel with 9/16 Inch x 1-1/8 Inch Slots on 2 Inch Centers

Four hole Steel Corner Plate with SilverGalv finish.

Nonmetallic Rigid Pipe Clamp. Nominal Pipe size 1 Inch. Design Load 300 pounds.