Turck Części zamienne do automatyki przemysłowej

The BI10-EM30-Y1X-H1141 Inductive Sensor is designed for precise switching at a rated distance of 10 mm. This sensor features a flush design and a M30 × 1.5 threaded tube, constructed from stainless steel with the material grade 1.4301. It operates on DC 2-wire with a nominal voltage of 8.2 VDC. The output complies with DIN EN 60947-5-6 (NAMUR) standards. The sensor comes equipped with an M12 x 1 male connector, and it is certified for ATEX category II 1 G, Ex zone 0, ATEX category II 1 D, Ex zone 20. It also meets SIL2 (Low Demand Mode) according to IEC 61508, PL c according to ISO 13849-1 at HFT0, and SIL3 (All Demand Mode) according to IEC 61508, PL e according to ISO 13849-1 with redundant configuration HFT1.

The Turck BI1.5-EG08K-Y1 is an inductive sensor designed for precise and reliable operation. It features a rated switching distance of 1.5 mm, ensuring accurate detection in tight spaces. The cable length (L) is 2 m, providing flexibility in installation. Constructed with a flush, threaded barrel made from stainless steel, the sensor boasts robustness and durability. It adheres to stringent safety standards, including ATEX category II 1 G, Ex zone 0, ATEX category II 1 D, Ex zone 20, SIL2 (Low Demand Mode) acc. to IEC 61508, PL c acc. to ISO 13849-1 at HFT0, and SIL3 (All Demand Mode) acc. to IEC 61508, PL e acc. to ISO 13849-1 with redundant configuration HFT1.

The C3-A30FX/048VDC Comat Releco by Turck is an advanced power relay designed for demanding industrial applications. This relay features a robust 11-pin configuration, providing versatile connectivity options.With its 3 pole changeover contacts, this relay offers reliable switching capabilities. The contact rating is impressive at 10A/250V AC1 and 0.5A/110V DC1, ensuring efficient power distribution. The coil voltage is a standard 48 VDC.

Inductive Sensor, With Extended Switching Distance, Rated switching distance 2 mm, Cable length (L) 2 m, Flush, Threaded barrel, M8 x 1, Stainless steel, 1.4427 SO, Factor 1 for all metals, Protection class IP68, Resistant to magnetic fields, Large switching distance, High switching frequency, Recessed mountable, DC 3-wire, 10…30 VDC, NO contact, NPN output, Cable connection

Magnetic Field Sensor, Magnetic-inductive Proximity Sensor, Rated switching distance 90 mm, Cable length (L) 2 m, Threaded barrel, M12 x 1, Chrome-plated brass, Rated operating distance 90 mm with DMR31-15-5 magnet, DC 2-wire, nom. 8.2 VDC, Output acc. to DIN EN 60947-5-6 (NAMUR), Cable connection, ATEX category II 1 G, Ex zone 0, ATEX category II 1 D, Ex zone 20, SIL2 (Low Demand Mode) acc. to IEC 61508, PL c acc. to ISO 13849-1 at HFT0, SIL3 (All Demand Mode) acc. to IEC 61508, PL e acc. to ISO 13849-1 with redundant configuration HFT1

The M2-QR24 Accessories, consisting of a Protecting Ring and Shield Plate, are designed to enhance the functionality of the RI-QR24 encoder. These accessories provide a hollow shaft with an internal diameter of 6 mm and include a mounting option for a shaft adapter.

The NI40U-CP40-FDZ30X2 Inductive Sensor is designed with an extended switching distance of 40 mm. It features a non-flush design and a rectangular shape with a height of 40 mm. The active face can be oriented in 9 different directions, providing versatility in installation. Constructed from PBT-GF30-V0 material, this sensor incorporates high luminance corner LEDs for optimal visibility. It offers a factor of 1 for all metals, ensuring reliable performance across various applications. The increased switching distance enhances coverage and resistance to magnetic fields. With an extended temperature range and high switching frequency, the NI40U-CP40-FDZ30X2 Inductive Sensor is suitable for a wide range of environments. It supports both AC 2-wire (20–250 VAC) and DC 2-wire (10–300 VDC) power supplies, and offers programmable NC/NO switching states. The sensor features a terminal chamber for easy wiring. It is protected by an IP68 rating, ensuring resistance to dust and water. The NI40U-CP40-FDZ30X2 Inductive Sensor is compatible with various automation systems, making it a reliable choice for industrial applications.

The NI10U-M12-AN6X-H1141 Inductive Switch is designed for applications requiring extended switching distances. With a rated switching distance of 10 mm, this non-flush switch features a M12 × 1 threaded barrel and is chrome-plated brass for durability. It's suitable for all metals with a factor of 1, offering protection class IP68 and resistance to magnetic fields. The switch boasts an integrated predamping protection feature, making it ideal for environments with little metal-free spaces. This switch operates on DC 3-wire at voltages ranging from 10 to 30 VDC, providing NO contact and NPN output. It comes with a M12 x 1 male connector for easy integration.

The Turck NI15-M30E-LIU-H1141 inductive sensor is designed for precise measurement of non-ferromagnetic materials. It features an analog output, allowing for a measuring range of 2 mm with a maximum range of 12 mm. This sensor is available in a long version and is constructed from chrome-plated brass. It comes with a threaded barrel of M30 x 1.5 and is equipped with a 4-wire connection, capable of operating within a voltage range of 15 to 30 VDC. The sensor provides an analog output in the form of either 0 to 10 volts or 0 to 20 milliamps. It is also equipped with an M12 x 1 male connector for easy integration into your system.

Inductive Sensor, Rated switching distance 8 mm, Non-flush, M12 × 1 threaded barrel, Chrome-plated brass, Factor 1 for all metals, Protection class IP68, Resistant to magnetic fields, Extended temperature range, High switching frequency, DC 3-wire, 10…30 VDC, NO contact, NPN output, M12 x 1 male connector

Inductive Sensor, Rated switching distance 8 mm, Non-flush, Threaded barrel, M12 x 1, Stainless steel, 1.4301, Duroplast front cap, very resistant to thermal and mechanical load, Factor 1 for all metals, Protection class IP68, Resistant to magnetic fields, Extended temperature range, High switching frequency, Auto-compensation protects against pre-damping, DC 3-wire, 10…30 VDC, NO contact, PNP output, M12 x 1 male connector

The NI12U-M18-AN6X-H1141 Inductive Sensor is a high-performance device designed for precise switching in industrial applications. It features a non-flush design with a threaded barrel, ensuring reliable and accurate performance. The sensor is rated at a switching distance of 12 mm and offers a protection class of IP68, making it resistant to harsh environmental conditions. With a temperature range of -40°C to +85°C, this sensor can operate effectively in extreme temperatures. It also boasts a high switching frequency, ensuring fast response times. The DC 3-wire design allows for easy integration into various systems, while the NO contact and NPN output provide versatile control options. With its M12 x 1 male connector, this sensor is compatible with a wide range of industrial devices.

Inductive Sensor, Rated switching distance 15 mm, Cable length (L) 2 m, Non-flush, Threaded barrel, M30 x 1.5, Chrome-plated brass, DC 2-wire, nom. 8.2 VDC, Output acc. to DIN EN 60947-5-6 (NAMUR), Cable connection, ATEX category II 1 G, Ex zone 0, ATEX category II 1 D, Ex zone 20, SIL2 (Low Demand Mode) acc. to IEC 61508, PL c acc. to ISO 13849-1 at HFT0, SIL3 (All Demand Mode) acc. to IEC 61508, PL e acc. to ISO 13849-1 with redundant configuration HFT1

Inductive Sensor, Rated switching distance 15 mm, Non-flush, M30 × 1.5 threaded tube, Stainless steel, 1.4301, DC 2-wire, nom. 8.2 VDC, Output acc. to DIN EN 60947-5-6 (NAMUR), M12 x 1 male connector, ATEX category II 1 G, Ex zone 0, ATEX category II 1 D, Ex zone 20, SIL2 (Low Demand Mode) acc. to IEC 61508, PL c acc. to ISO 13849-1 at HFT0, SIL3 (All Demand Mode) acc. to IEC 61508, PL e acc. to ISO 13849-1 with redundant configuration HFT1

Inductive Sensor, Rated switching distance 3 mm, Non-flush, Threaded barrel, M8 x 1, Stainless steel, 1.4427 SO, DC 2-wire, nom. 8.2 VDC, Output acc. to DIN EN 60947-5-6 (NAMUR), M12 x 1 male connector, ATEX category II 1 G, Ex zone 0, ATEX category II 1 D, Ex zone 20, SIL2 (Low Demand Mode) acc. to IEC 61508, PL c acc. to ISO 13849-1 at HFT0, SIL3 (All Demand Mode) acc. to IEC 61508, PL e acc. to ISO 13849-1 with redundant configuration HFT1

The Turck Inductive Sensor, model NI4-M12-VP6X-H1141, offers a non-flush design with a M12 × 1 threaded barrel. Crafted from chrome-plated brass, this sensor is robust and durable. It operates on DC 4-wire, with a voltage range of 10…30 VDC. The sensor features changeover contact, providing PNP output. The M12 x 1 male connector ensures easy integration into your system.

Inductive Sensor, With Extended Switching Distance, Rated switching distance 10 mm, Non-flush, M12 × 1 threaded barrel, Long version, Chrome-plated brass, Factor 1 for all metals, Protection class IP68, Resistant to magnetic fields, Large switching distance, Integrated protection against predamping, Little metal-free spaces, DC 3-wire, 10…30 VDC, NO contact, PNP output, M12 x 1 male connector

Inductive Sensor, With Extended Switching Distance, Rated switching distance 10 mm, Non-flush, M12 × 1 threaded barrel, Chrome-plated brass, Factor 1 for all metals, Protection class IP68, Resistant to magnetic fields, Large switching distance, Integrated protection against predamping, Little metal-free spaces, DC 3-wire, 10…30 VDC, NO contact, PNP output, M8 x 1 male connector

The Turck PT10R-2001-IOL-H1141 is a high-quality pressure transmitter designed for industrial applications. It features a fully welded metal measuring cell, ensuring durability and precision in harsh environments. The device has a pressure range of 0 to 10 bar relative and operates on a voltage range of 18 to 33 V DC. The PT10R-2001-IOL-H1141 provides two switching outputs, with NO/NC contact. These outputs are PNP/NPN, making them versatile for various control systems. The device also supports IO-Link communication, allowing seamless integration into modern automation systems. The process connection is G1/4 female thread, with front sealing for easy maintenance and replacement. The connector device is M12 × 1, ensuring reliable and secure connections. This pressure transmitter is a reliable solution for monitoring and controlling pressures in industrial processes.

The Turck Pressure Sensor is designed for industrial applications that require precise pressure measurement. With a relative pressure range of -1 to 10 bar, this sensor provides accurate and reliable data for a wide range of industrial processes. Key Features: 4-digit, 2-colored, 12-segment display for easy reading Rotatable by 180° for flexible installation Metal measuring cell for durability and precision IO-Link for seamless integration with automation systems Analog output (current/voltage) for versatile use Process connection G1/4 female thread for easy connection Plug-in device for quick and easy installation M12 × 1 for secure and reliable mounting