MIC-ALM-WAS-24

Specifications

Country of Origin

Portugal

Gross Weight (Kg)

0.86

Net Weight (Kg)

0.77

Length (M)

0.285

Width (M)

0.198

Height (M)

0.14

Gross Weight (Lbs)

1.89598

Net Weight (Lbs)

1.69756

Length (In)

11.22048

Width (In)

7.79528

Height (In)

5.511819999999999

Material

F.01U.286.248

Technical Specifications

Alarm Output

3 open collector outputs, 32 VDC, 150 mA

Communications Protocol

Proprietary half-duplex RS-485, 57600 baud

Protection on Relay Outputs

Peak current 7.3 A, peak power 600 W (10/1000 μ)

Weight

0.6 kg (1.3 lb)

Cold Start-up Temperature

-40 °C (-40 °F) (Requires 60 minute warm-up prior to operation)

Humidity

0-100%

Standard Color

Grey (RAL 7035)

Alarm Input

4 normal dry contacts (selectable N.O./N.C.)2 monitored tamper alarm inputs, 2.2K ohm end-of-line termination

Standard Finish

sand finish

Protection on RS-485

Peak current 10 A, peak power 300 W (8/20 μ)

Power

24 VAC

Power consumption

1.5 W

Construction Material

Polycarbonate

Protection on Power Input (Camera)

Peak current 7.3 A, peak power 600 W (10/1000 μ)

Dimensions(L

W x H) x 200 mm x 120 mm x 79 mm(7.9 in. x 4.7 in. x 3.1 in.)

Alarm/Data

3-wire RS-485 (to external alarm/washer accessory unit) up to 100 m

Protection on Alarm Inputs

Peak current 17 A, peak power 300 W (8/20 μ)

Operating Temperature

-40 °C to +60 °C (-40 °F to +140 °F)

Input voltage

24 VAC ± 10%, 50/60 Hz

Storage Temperature

-40 °C to +70 °C (-40 °F to +158 °F)

Relay Output

1 dry contact relay, 24VAC/VDC, 5 A (for washer pump)

Protection on Alarm Outputs

Peak current 2 A, peak power 300 W (8/20 μ)

LEDs

Red LED (ON indicates power on)Green LEDs (blinking indicates activation for each alarm input)Yellow LED (blinking indicates active communication between the MIC-ALM-WAS-24 and the MIC7000 camera)

Ingress Protection Rating/ Standard

IP67NEMA 4, 4X, 6, 12, 13

Documents