Schmersal
101165883
- Condición:
- Nuevo Precintado de Fábrica
- Disponible:
- 6 piezasEn stockActualizado en: 19-11-2024
- Oferta de:
Proveedor de confianza de Automa.Net- Entrega Estimada:
- Bajo pedido
- Garantía:
- 12 meses
1
Schmersal
101165883
1 / 3
- Part Number
- 101165883
- ETIM
- Group Code : EG000019
- Group Description : Relays
- Class Description : Device for monitoring of safety-related circuits
- Class Code : EC001449
- Version : 7
Métodos de pago:
- Mejor oferta de:
Proveedor de confianza de Automa.Net- Disponibilidad:
- 1 piezaEn stockActualizado en: 16-10-2024
- Garantía:
- 24 meses
- Entrega Estimada:
- Bajo pedido
- Condición:
- Nuevo Precintado de Fábrica
Nuevo Precintado de Fábrica - Un artículo completamente nuevo, sin usar, sin abrir, sin daños, en su embalaje original sellado por el fabricante.
Un total de 8 Parts In-Stock de 3 Distributors
Información de envío
Proceso de Pago Seguro
Políticas de Devolución y Reembolso
Políticas de Envío
Políticas de Garantía
Ofertas Disponibles (2)
Schmersal
101165883
- Condición:
- Nuevo Precintado de Fábrica
- Disponible:
- 1 piezaEn stockActualizado en: 19-11-2024
- Oferta de:
Proveedor de confianza de Automa.Net- Entrega Estimada:
- Bajo pedido
- Garantía:
- 12 meses
1
Oferta con plazo de entrega del fabricante
Entrega:Bajo pedido
El mejor precio:
€226.04
Electrical data
- Frequency range
- 50 Hz
- Operating voltage
- 24 VAC -10 % / +10 % | 24 VDC -10 % / +20 %
- Rated operating voltage
- 24 VAC
- Rated operating voltage
- 24 VDC
- Operating current
- 500 mA
- Rated AC voltage for controls, 50 Hz, minimum
- 21.6 VAC
- Rated control voltage at AC 50 Hz, maximum
- 28.8 VAC
- Rated AC voltage for controls at DC minimum
- 21.6 VDC
- Rated control voltage at DC, maximum
- 28.8 VDC
- Utilisation category AC-15
- 230 VAC
- Utilisation category AC-15
- 2 A
- Utilisation category DC-13
- 24 VDC
- Utilisation category DC-13
- 2 A
- Electrical power consumption, maximum
- 4 W
- Pull-in delay at RESET
- 100 ms ... 2000 ms
Note
- Note (General)
- The overall machine safety depends on the professional mounting and installation of the safety monitoring module and the signal transmitter, as well as on the correct and professional electrical connection of the components. | If there it any risk whatsoever, the machine may not be restarted.
Mechanical data - Dimensions
- Width
- 22.5 mm
- Height
- 100 mm
- Depth
- 121 mm
Ambient conditions - Insulation values
- Rated impulse withstand voltage U
- 4 kV
- Overvoltage category
- III
- Degree of pollution
- 2
General data - Features
- Stop-Category
- 0
- Electronic Fuse
- Yes
- Wire breakage detection
- Yes
- Cross-circuit detection
- Yes
- Start input
- Yes
- Feedback circuit
- Yes
- Automatic reset function
- Yes
- Reset edge detection
- Yes
- Reset after disconnection of supply voltage
- Yes
- Earth connection detection
- Yes
- Integral system diagnostics, status
- Yes
- Number of LEDs
- 5
- Number of undelayed semi-conductor outputs with signaling function
- 1
- Number of safety contacts
- 1
- Number of signalling outputs
- 1
General data
- Standards
- EN ISO 13849-1 | EN ISO 13850
- Climatic stress
- EN ISO 13856-2
- Enclosure material
- Glass-fibre, thermoplastic
- Gross weight
- 175 g
- Reaction time, maximum
- 17 ms
Safety classification
- Performance Level, up to
- d
- Category
- 3
- Control category to EN954
- 3
- PFH value
- 1.01 x 10⁻⁷ /h
- Note (PFH-value)
- up to max. 5,000 switching cycles/year
- Mission time
- 20 Year(s)
Wiring example
- Note (Wiring diagram)
- Both re-initialisation and auto-reset must comply with the requirements of EN 1760-2 (diagram A2, A3). | The wiring diagram is shown for the de-energised condition. | Monitoring the safety edges SE 40 / SE 70 with a safety monitoring unit SE-304C up to PL d and Category 3. | Manual reset function or auto-reset: the manual reset function is triggered by an edge-sensitive signal (edge switching "0-1-0" within 100 ms up to 2 s) (X2/X3). Alternatively, the auto-reset function can be activated by a connection (A3/X2). | If less than 4 safety edges are connected, the following diagram must be observed.
Other data
- Note (applications)
- Safety edges
Ambient conditions
- Degree of protection of the enclosure
- IP40
- Degree of protection of the mounting space
- IP54
- Degree of protection of clips or terminals
- IP20
- Ambient temperature
- +5 ... +55 °C
- Resistance to vibrations
- 10 … 55 Hz, amplitude 0.15 mm
Mechanical data - Connection technique
- Termination
- Screw terminals M20 x 1.5
- Length of cable
- 200 m
- Cable section, maximum
- 2 x 1.5 mm²
- Note (Cable section)
- All indications including the conductor ferrules.
Mechanical data
- Mechanical life, minimum
- 10,000,000 Operations
- Mounting
- Snaps onto standard DIN rail to EN 60715
Specifications
- Width
- 22.5 mm
- Height
- 100 mm
- Depth
- 121 mm
Approvals - Standards
- Certificates
- TÜV
Electrical data - Electromagnetic compatibility (EMC)
- EMC rating
- EMC-Directive
Status indication
- Indicated operating states
- Authorised operation | fault indication
