101216956

Electrical data - Fail-safe digital outputs

Rated operating current (safety outputs)

250 mA

Output current, (fail-safe output), maximum

0.25 A

Versions

p-type

Voltage drop U

1 V

Current leakage I

0.5 mA

Voltage, Utilisation category DC-12

24 VDC

Current, Utilisation category DC-12

0.25 A

Voltage, Utilisation category DC-13

24 VDC

Current, Utilisation category DC-13

0.25 A

Safety appraisal

Standards

EN ISO 13849-1 | IEC 60947-5-3 | EN 62061 | IEC 61508

Performance level, up to

e

Control category to EN13849

4

PFH-value

2.70 x 10⁻¹⁰ /h

Safety Integrity Level (SIL), suitable for applications in

3

Mission Time

20 Year(s)

Electrical data

Voltage type

DC (direct current)

No-load supply current I

100 mA

Rated operating voltage

24 VDC −15 % / +10 %

Rated operating voltage, minimum

20.4 VDC

Rated operating voltage, maximum

26.4 VDC

Operating current

600 mA

Required rated short-circuit current to EN 60947-5-1

100 A

Switching frequency, approx.

1 Hz

Mechanical data - Dimensions

Length of sensor

22 mm

Width of sensor

106.3 mm

Height of sensor

25 mm

Pin assignment

PIN 1

A1 Ue Brown

PIN 2

X1 Safety input 1 White

PIN 3

A2 GND Blue

PIN 4

Y1 Safety output 1 Black

PIN 5

OUT Diagnostic output OUT Grey

PIN 6

X2 Safety input 2 violet

PIN 7

Y2 Safety output 2 red

PIN 8

IN without function Pink

Scope of delivery

Included in delivery

Actuators must be ordered separately.

Ambient conditions - Insulation value

Rated insulation voltage U

32 VDC

Rated impulse withstand voltage U

0.8 kV

Overvoltage category

III

Degree of pollution to VDE 0100

3

General data - Features

Diagnostic output

Yes

Short circuit detection

Yes

Short-circuit recognition

Yes

Safety functions

Yes

Cascadable

Yes

Integral System Diagnostics, status

Yes

Number of LEDs

3

Number of semi-conductor outputs with signaling function

1

Number of fail-safe digital outputs

2

General data

Standards

IEC 60947-5-3

General information

Individual coding, multiple teaching

Coding level according to ISO 14119

High

Active principle

RFID

Housing construction form

Block

Installation conditions (mechanical)

not flush

Sensor topology

Sensor for series wiring

Enclosure material

Plastic, glass-fibre reinforced thermoplastic, self-extinguishing

Active area

Glass-fibre, reinforced thermoplastic

Gross weight

80 g

Time to readiness, maximum

2,000 ms

Reaction time, maximum

100 ms

Duration of risk, maximum

200 ms

Ambient conditions

Degree of protection

IP65 to EN 60529 | IP67 to EN 60529 | IP69 to EN 60529

Ambient temperature, minimum

-25 °C

Ambient temperature, maximum

+70 °C

Storage and transport temperature, minimum

-25 °C

Storage and transport temperature, maximum

+85 °C

Material temperature resistance of the cable (in motion), minimum

-10 °C

Material temperature resistance of the cable (at rest), minimum

-30 °C

Material temperature resistance (long-term), maximum

+105 °C

Resistance to vibrations to EN 60068-2-6

10 … 55 Hz, amplitude 1 mm

Restistance to shock

30 g / 11 ms

Protection rating

III

Electrical data - Diagnostic output

Versions

p-type

Voltage drop U

2 V

Voltage, Utilisation category DC-12

24 VDC

Current, Utilisation category DC-12

0.05 A

Voltage, Utilisation category DC-13

24 VDC

Current, Utilisation category DC-13

0.05 A

Mechanical data - Connection technique

Terminal Connector

Connector M12, 8-pole

Note

The cable section of the interconnecting cable must be observed! Cable length and cable section alter the voltage drop depending on the output current

Mechanical data - Switching distances according IEC 60947-5-3

Switch distance

12 mm

Ensured switch distance "ON" S

10 mm

Ensured switch distance "OFF" S

20 mm

Mechanical data

Actuating panels

lateral

Active area

lateral

Hysteresis (Switch distance), maximum

2 mm

Repeat accuracy R R

0.5 mm

Note (Repeat accuracy

Axial offset: The long side allows for a maximum height misalignment (x) of sensor and actuator of 8 mm (e.g. mounting tolerance or due to guard door sagging). The axial misalignment (y) is max. ± 18 mm (see figure: Operating principle). Minimum clearance between two sensor systems 100 mm.

Mounting

A screw length of 25 mm is sufficient for sensor mounting and for side mounting of the actuators. 30 mm long screws are recommended when the actuator is mounted upright and/or when the sealing discs are used.

Accessory

Recommendation (actuator)

RST 36-1 | RST 36-1-R

Recommended safety switchgear

PROTECT PSC1 | SRB-E-301ST | SRB-E-201LC

Electrical data - Electromagnetic compatibility (EMC)

Interfering radiation

IEC 61000-6-4

EMC rating

IEC 60947-3

Approval - Standards

Certificates

TÜV | cULus | ECOLAB | EAC | FCC | IC

Status indication

Note (LED switching conditions display)

LED yellow: Operating condition | LED green: Supply voltage | LED red: Fault

Modelos CAD

traceparts

Descargar