Fluke Networks
MS2-100
MicroScanner™ Cable Verifier Series
- Get up to 90 days payment terms from 500+ suppliers
- Reselling discounts up to 40%!
4032,60 zł
1
Payment methods:
A total of 72 Parts In-Stock from 1 Distributor
Product Conditions:
General Specifications
- Test connectors
- || Shielded 8-pin modular jack accepts 8-pin modular (RJ45) and 4-pin modular (RJ11) plugs. MicroScanner || : F-connector for coaxial cable.
- Power
- Battery type: 2 AA (NEDA 15A, IEC LR6) alkaline batteries || Battery life: 20 hours of typical use || Other compatible battery types: 2 AA photo lithium, NIMH, NICAD
- Dimensions and weight (with batteries installed and wiremap adapter attached)
- : 10. 6 oz (300 g)MicroScanner PoE: 10. 6 oz (300 g) || 3 in x 6. 4in x 1. 4 in (7. 6 cm x 16. 3 cm x 3. 6 cm)MicroScanner
- Display
- Monochrome LCD with backlight
Environmental Specifications
- Operating temperature
- 32 °F to 113 °F (0 °C to 45 °C)
- Storage temperature
- -4 °F to +140 °F (-20 °C to +60 °C)
- Operating relative humidity (% RH without condensation)
- 75 % (95 °F to 113 °F 35 °C to 45 °C) || 90 % (50 °F to 95 °F 10 °C to 35 °C)
- Shock and Vibration
- Random, 2 g, 5 Hz-500 Hz (Class 2) || 1 m drop test with and without wiremap adapter attached
- Safety
- IEC 61010-1 3rd Edition
- Altitude
- 4,000 m; Storage: 12,000 m
- EMC
- IEC 61326-1
Performance Specifications
- Cable types tested
- Twisted pair: UTP, FTP, SSTP || Coaxial (MicroScanner2): 75 Ω, 50 Ω, 93 Ω
- Length test
- Resolution: 0. 3 m (1 ft) || Range: 460 m (1500 ft) || Calibration: User-settable NVP for twisted pair and coax (MicroScanner2). Can determine actual NVP with known length of cable. || Typical accuracy: ± 4% or 0. 6 m (2 ft) whichever is greater. NVP uncertainty is an additional error.
- Wiremap test
- Detects single-wire faults, shorts, miswires, split pairs, and up to seven far-end adapter IDs. The wiremap is drawn with proportional length to visually indicate the approximate location of faults.
- Ethernet port detection
- : Detects the advertised speed of 802. 3 Ethernet ports with speeds of 10 Mbps, 100 Mbps, and 1 Gbps. MicroScanner PoE: Detects the advertised speed of 802. 3 Ethernet ports with speeds of 10 Mbps, 100 Mbps, 1 Gbps, 2. 5 Gbps, 5 Gbps, and 10 Gbps. || MicroScanner
- Tone generator
- Supports toning and cable mapping with a Fluke Networks digital IntelliTone™ probe. Generates four tones compatible with typical analog probes. SmartTone™ feature gives positive identification of cables in bundles when using an IntelliTone or an analog probe.
Test Modes
- Cable test
- Measures length, verifies wiremap, identifies remote ID locators, and detects Ethernet ports. MicroScanner PoE also shows HIGH Ω when the resistance of the cable is more than 12. 5 Ω. Displays results on one screen.
- Tone
- Generates Intellitone™ and normal analog toning signals
- PoE
- : Solicits and detects the presence of 802. 3af compatible PoE (Power over Ethernet) devicesMicroScanner PoE: Solicits and detects the presence of 802. 3af, at, bt, and UPOE (Cisco’s Universal Power over Ethernet) compatible PoE devices || MicroScanner
Other Categories
ActuatorsBlocksCables, Pipes & HosesCompressorsControlCouplings & FittingsCylinders & PistonsElectronicsFiltersHVACIndustrial PC's & HMIsLightingLinear techniqueMotorsPower SupplyPower TransmissionPumps & ValvesRenewable energyRoboticsSeals, Rings & ConnectorsSensors & Measuring DevicesTools and AccessoriesCNCOther