FLK-1587/MDT FC Kit

Capacitance

Range  Resolution

Accuracy ±(% of Rdg+Counts)

1000 nF  1 nF

±(1.2% + 2)

10.00 μF  0.01 μF

±(1.2% + 2)

100.0 μF  0.1 μF

±(1.2% ±90 counts)

9999 μF  1 μF

±(1.2% ±90 counts)

Frequency Measurement

Range Resolution

Accuracy ±(% of Rdg+Counts)

99.99 Hz

0.01 Hz : ±(0.1% + 1)

999.9 Hz

0.1 Hz : ±(0.1% + 1)

9.999 kHz

0.001 kHz : ±(0.1% + 1)

99.99 kHz

0.01 kHz : ±(0.1% + 1)

DC Millivolts Measurement

Range Resolution

Accuracy ±(% of Rdg + Counts)

600.0 mVdc

0.1 mV: ±(0.1% + 1)

Insulation Specifications

Measurement range

0.01 MΩ to 2 GΩ

Test voltages

50, 100, 250, 500, 1000 V

Test voltage accuracy

+20%, -0%

Short-circuit test current

1 mA nominal

Auto discharge

Discharge time <0.5 second for C = 1 μF or less

Live circuit detection

Inhibit test if terminal voltage > 30 V prior to initialization of test

Maximum capacitive load

Operable with up to 1 μF load

Mechanical and General Specifications

Size

124 x 61 x 27 mm

Warranty

1 year

Weight

200 g

Maximum conductor diameter

32 mm (1.25 in)

Maximum conductor size (busbar)

750 MCM

Power supply

From unit under test

Warranty

2 years

Output cable length

1.5 m (59 in)

Shrouded banana plugs

Yes

Continuity Test

Continuity indication

Continuous audible tone for testresistance below 25 Ω and off above 100 Ω. Maximum Reading; 1000 Ω

Open circuit voltage

<8.0 V

Short circuit current

1.0 mA typical

Overload protection

1000 V rms

Response time

>1 m sec

AC 45 Hz to 1000 Hz

Range

400 mA || 60 mA

Resolution

0.1 mA || 0.01 mA

Accuracy ±(% of Rdg+Counts)

±(1.5% + 2)¹ || ±(1.5% + 2)¹

Burden voltage (Typical)

2 mV/mA || 2 mV/mA

Electromagnetic Compatibility

International

IEC 61326-1:Portable Electromagnetic Environment; IEC 61326-2-2 CISPR 11: Group 1, Class A || Group 1: Equipment has intentionally generated and/or uses conductively-coupled radio frequency energy that is necessary for the internal function of the equipment itself. || Class A: Equipment is suitable for use in all establishments other than domestic and those directly connected to a low-voltage power supply network that supplies buildings used for domestic purposes.  There may be potential difficulties in ensuring electromagnetic compatibility in other environments due to conducted and radiated disturbances. || Emissions that exceed the levels required by CISPR 11 can occur when the equipment is connected to a test object. The equipment may not meet the immunity requirements of this standard when test leads and/or test probes are connected.

Korea (KCC)

Class A Equipment (Industrial Broadcasting & Communication Equipment) || Class A: Equipment meets requirements for industrial electromagnetic wave equipment and the seller or user should take notice of it. This equipment is intended for use in business environments and not to be used in homes.

USA (FCC)

47 CFR 15 subpart B. This product is considered an exempt device per clause 15.103.

Enclosure protection

IEC 60529: IP40 (non-operating)

Diode Test

Diode test indication

Display voltage drop: 0.6 V at1.0 mA nominal test current:

Accuracy

±(2% + 3)

DC Voltage Measurement

Range Resolution

Accuracy ±(% of Rdg + Counts)

6.000 V dc

0.001 V: ±(0.09% + 2)

60.00 V dc

0.01 V: ±(0.09% + 2)

600.0 V dc

0.1 V: ±(0.09% + 2)

1000 V dc

1 V: ±(0.09% + 2)

Input impedance

10 MΩ (nominal), <100 pF

Normal mode rejection ratio

>60 dB @ 50 Hz or 60 Hz

Common mode rejection ratio

>120 dB @ dc, 50 Hz or 60 Hz (1 k unbalance)

Ohms Measurement

Range Resolution

Accuracy +(% of Rdg+Counts)¹

600.0 Ω

0.1 Ω: ±(0.9% + 2)

6.000 kΩ

0.001 kΩ: ±(0.9% + 2)

60.00 kΩ

0.01 kΩ: ±(0.9% + 2)

600.0 kΩ

0.1 KΩ: ±(0.9% + 2)

6.000 MΩ

0.001 MΩ: ±(0.9% + 2)

50.0 MΩ ²

0.01 MΩ: ±(1.5% + 3)

Overload protection

1000 V rms or dc

Open circuit test voltage

<8.0 V dc

Short circuit current

<1.1 mA

DC

Range

400 mA || 60 mA

Resolution

0.1 mA || 0.01 mA

Accuracy ±(% of Rdg+Counts)

±(0.2% + 2) || ±(0.2% + 2)

Burden voltage (Typical)

2 mV/mA || 2 mV/mA

Overload

600 mA for 2 minutes maximum

Fuse protection for mA input

0.44 mA, 1000 V, IR 10 kA

AC conversion

Inputs are ac-coupled and calibrated to the rms value of sine wave input

Technical Specifications

Voltage range

40-700 V

Frequency range

15-400 Hz

Operating timer

Continuous

Temperature Measurement

Range  Resolution

Accuracy ±(% of Rdg+Counts)¹

-40 ° C to 537 ° C

0.1 °C : ±(1% + 10 counts)

-40 ° F to 998 ° F

0.1 °F : ±(1% + 18 counts)

Specifications

Nominal current range

400  A

Continuous current range

1 A - 400 A

Maximum non-destructive current

1000 A

Lowest measurable current

1 A

Basic accuracy

(% reading + floorspec)

Useable frequency

5 Hz - 20 kHz

Output level(s)

1 mA/A

Safety Specifications

Electrical safety

EN 61010,  EN 61557-7

Safety

CAT IV 600 V, CAT III, 1000 V

Overvoltage category

CAT IV, 300V

Maximum voltage

1000 V AC rms from earth to ground, in compliance with EN61010

Frequency Counter Sensitivity

600.0 mV ac

V ac Sensitivity (RMS Sine Wave)¹  5 Hz to 20 kHz : 100.0 mV  || V ac Sensitivity (RMS Sine Wave)¹  20 kHz to 100 kHz: 150.0 mV  || DC Trigger Levels¹ to 20 kHz²: NA

6.0 V

V ac Sensitivity (RMS Sine Wave)¹  5 Hz to 20 kHz : 1.0 V  || V ac Sensitivity (RMS Sine Wave)¹  20 kHz to 100 kHz: 1.5 V  || DC Trigger Levels¹ to 20 kHz²: -400.0 mV and 2.5 V

60.0 V

V ac Sensitivity (RMS Sine Wave)¹  5 Hz to 20 kHz : 10.0 V  || V ac Sensitivity (RMS Sine Wave)¹  20 kHz to 100 kHz: 36.0 V  || DC Trigger Levels¹ to 20 kHz²: 1.2 V and 4.0 V

600.0 V

V ac Sensitivity (RMS Sine Wave)¹  5 Hz to 20 kHz : 100.0 V  || V ac Sensitivity (RMS Sine Wave)¹  20 kHz to 100 kHz: - || DC Trigger Levels¹ to 20 kHz²: 12.0 V and 40.0 V

1000.0 V

V ac Sensitivity (RMS Sine Wave)¹  5 Hz to 20 kHz : 300.0 V  || V ac Sensitivity (RMS Sine Wave)¹  20 kHz to 100 kHz: - || DC Trigger Levels¹ to 20 kHz²: 12.0 V and 40.0 V

Environmental Specifications

Operating temperature

0 °C to 40 °C

Dust/water resistance

IP 40

General Specifications

Maximum voltage applied to any terminal and common

1000 V

Storage temperature

-40 °C to 60 °C (-40 °F to 140 °F)

Operating temperature

-20 °C to 55 °C (-4 °F to 131 °F)

Temperature coefficient

0.05 x (specified accuracy) per °C for temperatures <18 °C or >28 °C (<64 °F or >82 °F)

Relative humidity

Noncondensing || 0% to 95% @ 10 °C to 30 °C (50 °F to 86 °F) || 0% to 75% @ 30 °C to 40 °C (86 °F to 104 °F) || 0% to 40% @ 40 °C to 55 °C (104 °F to 131 °F)

Vibration

Random, 2 g, 5-500 Hz per MIL-PRF-28800F, Class 2 instrument

Radio frequency communication

2.4 GHz ISM Band

Radio frequency certification

FCC: T68-FBLE, IC: 6627A-FBLE

Safety

IEC 61010-1

Pollution Degree 2

IEC 61010-2-033

CAT IV 600 V / CAT III 1000 V

Batteries

Four AA batteries (NEDA 15A or IEC LR6)

Battery life

Meter use 1000 hours; Insulation test use: Meter can perform at least 1000 insulation tests with fresh alkaline batteries at room temperature. These are standard tests of 1000 V into 1 MΩ with a duty cycle of 5 seconds on and 25 seconds off.

Size (H x W x L)

5.0 x 10.0 x 20.3 cm (1.97 x 3.94 x 8.00 in)

Weight

550 g (1.2 lb)

Altitude

Operating: 2000 m

Altitude Storage

12,000 m

Over-range capability

110% of range except for capacitance which is 100%

Frequency overload protection

<107 V Hz

Fuse protection for mA input

0.44A, 1000 V, IR 10 kA

Range

600.0 mV Resolution

0.1 mV || 0.1 mV

600.0 mV

Accuracy 50 Hz to 60 Hz ±(% of Rdg + Counts): ±(1% + 3) || Accuracy 60 Hz to 5000 Hz ±(% of Rdg + Counts): ±(2% + 3) || Accuracy 50 Hz to 60 Hz ±(% of Rdg + Counts): ±(1% + 3) || Accuracy 60 Hz to 400 Hz ±(% of Rdg + Counts): +(2% + 3), -(6% - 3)

6.000 V Resolution

0.001 V || 0.001 V

6.000 V

Accuracy 50 Hz to 60 Hz ±(% of Rdg + Counts): ±(1% + 3) || Accuracy 60 Hz to 5000 Hz ±(% of Rdg + Counts): ±(2% + 3) || Accuracy 50 Hz to 60 Hz ±(% of Rdg + Counts): ±(1% + 3) || Accuracy 60 Hz to 400 Hz ±(% of Rdg + Counts): +(2% + 3), -(6% - 3)

60.00 V Resolution

0.01 V || 0.01 V

60.00 V

Accuracy 50 Hz to 60 Hz ±(% of Rdg + Counts): ±(1% + 3) || Accuracy 60 Hz to 5000 Hz ±(% of Rdg + Counts): ±(2% + 3) || Accuracy 50 Hz to 60 Hz ±(% of Rdg + Counts): ±(1% + 3) || Accuracy 60 Hz to 400 Hz ±(% of Rdg + Counts): +(2% + 3), -(6% - 3)

600.0 V Resolution

0.1 V || 0.1 V

600.0 V

Accuracy 50 Hz to 60 Hz ±(% of Rdg + Counts): ±(1% + 3) || Accuracy 60 Hz to 5000 Hz ±(% of Rdg + Counts): ±(2% + 3)¹ || Accuracy 50 Hz to 60 Hz ±(% of Rdg + Counts): ±(1% + 3) || Accuracy 60 Hz to 400 Hz ±(% of Rdg + Counts): +(2% + 3), -(6% - 3)

1000 V Resolution

1 V || 1 V

1000 V

Accuracy 50 Hz to 60 Hz ±(% of Rdg + Counts): ±(2% + 3) || Accuracy 60 Hz to 5000 Hz ±(% of Rdg + Counts): ±(2% + 3)¹ || Accuracy 50 Hz to 60 Hz ±(% of Rdg + Counts): ±(2% + 3) || Accuracy 60 Hz to 400 Hz ±(% of Rdg + Counts): +(2% + 3), -(6% - 3)

Output Voltage

50 V (0% to +20%) Display range

0.01 to 6.00 MΩ || 6.0 to 50.0 MΩ

50 V (0% to +20%) Resolution

0.01 MΩ || 0.1 MΩ

50 V (0% to +20%) Test current

1 mA @ 50 kΩ || 1 mA @ 50 kΩ

50 V (0% to +20%) Resistance accuracy ±(% of Rdg + Counts)

±(3% + 5 counts) || ±(3% + 5 counts)

100 V (0% to +20%) Display range

0.01 to 6.00 MΩ || 6.0 to 60.0 MΩ || 60 to 100 MΩ

100 V (0% to +20%) Resolution

0.01 MΩ || 0.1 MΩ || 1 MΩ

100 V (0% to +20%) Test current

1 mA @ 100 kΩ || 1 mA @ 100 kΩ || 1 mA @ 100 kΩ

100 V (0% to +20%) Resistance accuracy ±(% of Rdg + Counts)

±(3% + 5 counts) || ±(3% + 5 counts) || ±(3% + 5 counts)

250 V (0% to +20%) Display range

0.1 to 60.0 MΩ  || 60 to 250 MΩ

250 V (0% to +20%) Resolution

0.1 MΩ || 1 MΩ

250 V (0% to +20%) Test current

1 mA @ 250 kΩ  || 1 mA @ 250 kΩ

250 V (0% to +20%) Resistance accuracy ±(% of Rdg + Counts)

±(1.5% + 5 counts) || ±(1.5% + 5 counts)

500 V (0% to +20%) Display range

0.1 to 60.0 MΩ || 60 to 500 MΩ

500 V (0% to +20%) Resolution

0.1 MΩ || 1 MΩ

500 V (0% to +20%) Test current

1 mA @ 500 kΩ  || 1 mA @ 500 kΩ

500 V (0% to +20%) Resistance accuracy ±(% of Rdg + Counts)

±(1.5% + 5 counts) || ±(1.5% + 5 counts)

1000 V (0% to +20%) Display range

0.1 to 60.0 MΩ  || 60 to 600 MΩ  || 0.6 to 2.0 GΩ

1000 V (0% to +20%) Resolution

0.1 MΩ || 1 MΩ || 100 MΩ

1000 V (0% to +20%) Test current

1 mA @ 1 MΩ || 1 mA @ 1 MΩ || 1 mA @ 1 MΩ

1000 V (0% to +20%) Resistance accuracy ±(% of Rdg + Counts)

±(1.5% + 5 counts) || ±(1.5% + 5 counts) || ±(10% + 3 counts)

Documents