Fluke
FLK-VT04-M-Kit
- Get up to 90 days payment terms from 500+ suppliers
- Reselling discounts up to 40%!
Send request for price
1
Payment methods:
General Features
- Battery life
- Eight (8) hours
- Temperature measurement range
- -10°C to +250°C (14°F to 482°F)
- Temperature measurement accuracy
- ±2°C or ±2%
- Temperature measurement
- Yes, centerpoint
- Storage medium (micro SD card)
- Stores up to 10,000 images per Gb (4 Gb card included)
- Infrared spectral band
- 6.5 μm to 14 μm
- Level and span
- Auto
- Focus mechanism
- Focus free, no training required with built-in intelligence
- Focus options-exclusive user selectable NEAR/FAR options
- NEAR < 23 cm (9 in); FAR > 23 cm (9 in)
- Dimensions
- 21 x 7.5 x 5.5 cm (8.3 x 3 x 2.2 in); < 300 g (10.5 oz)
- File format
- is2 format saved to SD card. User can create professional reports or export images in SmartView (BMP, DIB, GIF, SPE, FIF, SPEG, JPG, PNG, TIF and TIFF)
- Safety and compliance
- CFR47: 2009 Class A. Part 15 subpart B; CE: EN 61326:2006; IEC/EN 61010-1:2010
- Warranty
- Two (2) years
Key Features
- Built-in digital camera
- Yes
- Thermal heat map overlay
- Yes, five blending modes
- Image optics system
- PyroBlend® Plus optic *4x sharper image than VT02
- Field of view
- 28° x 28°
- Hi-Lo temperature alarms
- Yes
- Time lapse image capture
- Yes
- Auto-monitor alarm
- Yes
- Battery type
- Li-Ion rechargeable
- Training
- No training required
- Ergonomics
- Slim pocket-sized design
- Hot and cold markers
- Yes
Insulation Specifications
- Measurement range
- 0.01 MΩ to 10 GΩ
- Test voltage
- 50 V, 100 V, 250 V, 500 V, 1000 V
- Test voltage accuracy
- +20%, - 0%
- Short circuit current
- 1 mA nominal
- Auto discharge
- Discharge time < 0.5 second for C = 1 µF or less
- Live circuit indicator
- Inhibit test if terminal voltage > 30 V prior to initialization of test
- Maximum capacitive load
- Operable with up to 1 µF load
- Measure accuracy
- 50 V: ±(3% + 5) || 100 V: ±(3% + 5) || 250 V: ±(1.5% + 5) || 500 V: ±(1.5% + 5) || 1000 V: ±(1.5% + 5) to 2000 MΩ, ±(10% + 3) above 2000 MΩ
Earth Bond Resistance Measurement
- Range/Resolution
- 20.00 Ω: 0.01 Ω || 200.0 Ω: 0.1 Ω || 2000 Ω: 1.0 Ω || 20.00 kΩ: 0.01 kΩ
- Accuracy
- ±(1.5% + 3)
- Overload protection
- 2 V rms or DC
- Open circuit test voltage
- > 4.0 V, < 8 V
- Short circuit current
- > 200.0 mA
AC/DC Voltage Measurement
- Accuracy Range
- 600.0 V
- Accuracy Resolution
- 0.1 V
- Accuracy
- 50 Hz to 400 Hz±(% of Rdg + Digits): ±(2% + 3)
- Input impedance
- 3 MΩ (nominal), < 100 pF
- Common mode rejection ratio (1 kΩ unbalanced)
- > 60 dB at DC, 50 or 60 Hz
- Overload protection
- 600 V rms or DC
General Specifications
- Maximum voltage applied to any terminal
- 600 V AC rms or DC
- Storage temperature
- -40°C to 60°C (-40°F to 140°F)
- Operating temperature
- -20°C to 55°C (-4°F to 131°F)
- Temperature coefficient
- 0.05 x (specified accuracy) per°C for temperatures < 18°C or > 28°C (< 64°F or > 82°F)
- Relative humidity
- 0% to 95% @ 10°C to 30°C (50°F to 86°F) || 0% to 75% @ 30°C to 40°C (86°F to 104°F) || 0% to 40% @ 40°C to 55°C (104°F to 131°F)
- Vibration
- Random, 2 g, 5-500 Hz per MIL-PRF-28800F, Class 2 instrument
- Shock
- 1 meter drop per IEC 61010-1 2nd Edition (1 meter drop test, six sides, oak floor)
- Electromagnetic compatibility
- In an RF field of 3 V/M, accuracy = specified accuracy (EN 61326-1:1997)
- Safety
- Complies with ANSI/ISA 82.02.01 (61010-1) 2004, CAN/CSA-C22.2 NO. 61010-1-04, and IEC/EN 61010-1 2nd Edition for measurement category IV 600 V (CAT IV)
- Certifications
- CSA per standard CSA/CAN C22.2 No. 61010.1-04; TUV per standard IEC/EN 61010-1 2nd Edition
- Batteries
- Four AA batteries (NEDA 15A or IEC LR6)
- Battery life Insulation test use
- Tester can perform at least 1000 insulation tests with fresh alkaline batteries at room temperature. These are standard tests of 1000 V into 1 MΩ with a duty cycle of 5 seconds on and 25 seconds off.
- Battery life Resistance measurements
- Tester can perform at least 2500 earth bond resistance measurements with fresh alkaline batteries at room temperature. These are standard tests of 1 Ω with a duty cycle of 5 seconds on and 25 seconds off.
- Size (H x W x L)
- 5.0 x 10.0 x 20.3 cm (1.97 x 3.94 x 8.00 in)
- Weight
- 550 g (1.2 lb)
- IP rating
- IP40
- Altitude
- Operating: 2000 m CAT IV 600 V, 3000 m CAT III 600 V || Non-operating (storage): 12,000 m
- Over-range capability
- 110% of range
- Included accessories
- TL224 Test Leads, TP74 Test Probes, clips PN 1958654 (red) and PN 1958646 (black), holster and remote probe
Related products
Other Categories
ActuatorsBlocksCables, Pipes & HosesCompressorsControlCouplings & FittingsCylinders & PistonsElectronicsFiltersHVACIndustrial PC's & HMIsLightingLinear techniqueMotorsPower SupplyPower TransmissionPumps & ValvesRenewable energyRoboticsSeals, Rings & ConnectorsSensors & Measuring DevicesTools and AccessoriesCNCOther