Fluke 369 FC

Safety and Environmental Specifications

General safety

IEC 61010-1: Pollution Degree 2

Measurement safety

IEC 61010-2-032: CAT III 600 V / CAT IV 300 V

Operating temperature

-10 °C to +50 °C

Storage temperature

-40 °C to +60 °C

Operating humidity

Non-condensing (<10 °C) || 90% relative humidity (10 °C to 30 °C) || 75% relative humidity (30 °C to 40 °C) || 45% relative humidity (40 °C to 50 °C)

Protection class

IEC 60529: IP30 (jaw closed)

Operating altitude

2000 m

Storage altitude

12000 m

Current sensor action category

IEC 61557-13: Class 1, ≤100 A / m

Physical

Display (LCD)

Digital readout: 3300 count

Display refresh rate

4 times / sec

Maximum conductor diameter

61 mm

Dimensions

257 x 116 x 46 mm

Weight

600 g

Battery

2 AA, IEC LR6, NEDA 15A, alkaline

Battery life

Expected battery life, without using backlight and spotlight, is more than 150 hours

Automatic shut-down

Meter automatically shuts down after 15 minutes of inactivity

Electrical Specifications

Measurement function

Alternating current

AC ampere range

3 mA, 30 mA, 300 mA, 3 A, 30 A, 60 A

Range selection

mA / A: manual selection3 mA / 30 mA / 300 mA: automatic selection3 A / 30 A / 60 A: automatic selection

Range / Resolution

3 mA¹ / 0.001 mA || 30 mA / 0.01 mA || 300 mA / 0.1 mA || 3 A / 0.001 A || 30 A / 0.01 A || 60 A / 0.1 A

Accuracy – filter activated (40 to 70 Hz), filter off (40 to 1 kHz)²

3 mA – 30 A60 A: 1% + 5 digits2% + 5 digits

Frequency

40 Hz to 1 kHz

Crest Factor

3

International

IEC 61326-1

Industrial Electromagnetic Environment

CISPR 11

Group 1 Class B

Group 1

Generated inside the equipment and / or use radio frequency energy associated with conducting the energy for the device's own internal functions is essential.

Class B

Equipment for home appliances and residential buildings directly connected to a low voltage power supply network equipment. When this device is connected to a test object, it may exceed the emission levels produced by CISPR 11 requirements.Korea (KCC): Class A Equipment (Industrial Broadcasting & Communication Equipment)

Class A

This product meets the requirements of industrial electromagnetic equipment, vendors or users should be aware of this. This device is intended for use in a commercial environment, instead of the home environment.USA (FCC): 47 CFR 15 subpart B. This product is considered an exempt device per clause 15.103.

Documents