Harting

09120012662

Connector sets, Axial screw termination, Male, Rated current: ‌100 A, Contacts: 1, Copper alloy, Silver plated, Bulkhead mounted housing, Size: 3 A
09120012662
  • Get up to 90 days payment terms from 500+ suppliers
  • Reselling discounts up to 40%!
Sign-Up
Send request for price
1
Payment methods:

Technical characteristics

Rated current
‌ 100 A
Rated voltage
400 V
Rated impulse voltage
6 kV
Pollution degree
3
Insulation resistance
>10
Contact resistance
≤ 0.3 mΩ
Limiting temperature
-40 ... +125 °C
Mating cycles
≥ 500

Version

Termination method
Axial screw termination
Gender
Male
Locking type
Single locking lever
Size
3 A
Number of contacts
1
Details
The described connectors are connectors without breaking capacity (COC) according to IEC 61984 and must not be coupled or decoupled under electrical load during use as intended! || Only cables with protection class 2 shall be used! || The axial screw termination is suitable for fine stranded wires according to EN 60228 class 5. Using alternative cables have to be tested separately. || For the assembly within bulkhead mounted housings the described installation conditions of the data and type sheets must be respected. || For the connection of the conductor into the axial screw contact use hex key with A/F 4.

Commercial data

Packaging size
1
Net weight
95.9 g
Country of origin
Germany
European customs tariff number
85366990
ECl@ss
27440101 Rectangular connectors (set)

Specifications and approvals

Specifications
EN 60664-1 || IEC 61984

Material properties

Material (insert)
Polycarbonate (PC)
Colour (insert)
RAL 7032 (pebble grey)
Material (contacts)
Copper alloy
Surface (contacts)
Silver plated
Material (hood/housing)
Zinc die-cast
Surface (hood/housing)
Powder-coated
Colour (hood/housing)
RAL 3000 (flame red)
Material (seal)
NBR
Material (locking)
Steel
Surface (locking)
Zinc plated
Material flammability class acc. to UL 94
V-0
RoHS
compliant with exemption
RoHS exemptions
Lead as an alloying element in steel for machining purposes and in galvanised steel containing up to 0,35 % lead by weight / Lead as an alloying element in steel for machining purposes containing up to 0,35 % lead by weight and in batch hot dip galvanised steel components containing up to 0,2 % lead by weight || Copper alloy containing up to 4 % lead by weight
ELV status
compliant with exemption
China RoHS
50
REACH Annex XVII substances
No
REACH ANNEX XIV substances
No
REACH SVHC substances
Lead || Potassium 1,1,2,2,3,3,4,4,4-nonafluorobutane-1-sulphonate

Identification

Category
Connector sets
Series
Han
Identification
1/0 protected
Type of hood/housing
Bulkhead mounted housing

Documents

Data Sheet

Download

Related products