M7285Q1024/U

Specifications

Valve Compatibility

Globe valves with Q5001 linkage

Switch Configuration

SPDT

Supply Voltage Frequency

50 Hz ; 60 Hz

Shaft Mounting

Adaptable using crank arm or linkage

Regulatory Approvals

ApprovalsCTick: ApprovalsUnderwritersLaboratoriesInc: Listed: File No. E4436, Guide No. XAPX for USA and CanadaApprovalsCanadianStandardsAssociation: ApprovalsCE: EN55011 (Emission) EN50082-2 (Immunity) 73/23/EEC (LVD)

Power Loss Action

Spring return

Overall Width

5.5 in ; 140 mm

Overall Height

6.4375 in ; 164 mm

Overall Depth

8.75 in ; 222 mm

NEMA Rating

NEMA 3

Mounting Style

Foot-mounted

Model

Series 2

Spring Return

Yes

Minimum Operating Ambient Temperature

-40 °F ; -40 °C

Runtime

30 to 53 s

Maximum Operating Humidity

85 %rh

Maximum Operating Ambient Temperature

150 °F ; 60 °C

Manual Override Included

No

IP Rating

IP44 Weather protection kit is available as accessory to upgrade to IP54

Number of End Switches

2

Internal Auxiliary Switch Voltage

120 V AC ; 240 V AC

Internal Auxiliary Switch Current

120 Vac-- 7.2 AFL / 43.2 ALR ; 240 Vac-- 3.6 AFL / 21.6 ALR

Input Signal

4 … 20 mA

Includes

Screw terminals

Housing Material

Die-cast Aluminum

Fire & Smoke Rating

No

Feedback Included

No

Features

Adjustable zero and span ; Adjustible stroke, 90° to 160° Asymmetrical

Driving Power Consumption

34 VA

Damper Compatibility

With crankarm and linkage

Connection Type

Screw terminals

Compatible with External Auxiliary Switches

Yes, Q607

Built In Rotation Limiter

No

Application

HVAC

Angle of Rotation

90 °

Torque

60 in·lb ; 6.8 Nm

Supply Voltage

24 V AC

Control Signal

Modulating (4-20 mA)

Additional Description

Modutrol IV Motors are spring return and non-spring return motors used to control dampers and valves. M62xx models are three-wire floating control motors for use with controllers that provide a switched spdt or floating output and have an internal electrically isolated feedback potentiometer that provides indication of the motor shaft position.; M72xx models accept a current or voltage signal from an electronic controller to position the motor shaft to any point between open and closed.; M91xx and M94xx models use a 135 Ohm modulating proportional signal to position the motor shaft to any point between open and closed. ; Modutrol IV Servo Motors ; Modutrol IV motors are used for damper and valve control in industrial burner applications and air handling installations. ; Modutrol motor timings are independent of line frequency.; Torque ratings for dual-ended shaft motors are the sum of the shaft torques (power-end torque plus auxiliary-end torque).; Breakaway torque is the maximum torque available to overcome occasional large loads such as a seized damper or valve. The breakaway torque is 1.5x the normal rated torque.; Other models than listed in this catalogue are available outside Europe. Most models can be replaced by the available European models.

Documents