HBL3200CS2WR

Specifications

Cord clamp range

1.00" To 2.50"

Product Type

insulgrip-devices

Cord Grip Retention

Per CSA C22.2 N0. 182.1 / UL1682

Certification

UL Listed, UL Standard 1682, UL50 and UL1010 (plugs only), CSA Certified to CSA C22.2 No. 182.1, No.94 and No. 159 (plugs only), UL Listed and CSA Certified Type 4X.

Hinge Bushing

Aluminum

Amperage

200A

Replacement Interior Number

IN3200MS2

Contact Carrier

Thermoset Polyester

Cord Clamps

Expoy Painted Aluminum

Impact Resistance

Per CSA C22.2 N0. 182.1 / UL1682

Certifications

UL Listed, UL Standard 1682, UL 50, and UL 1010 (plugs only) CSA Certified to CSA Spec. C22.2 No. 182.1, No. 94 and No. 159 (plugs only) UL Listed, CSA Certified Type 4X.

Retainer

Thermoset Polyester

Spring Washer

Stainless Steel (300 series)

Cord Accommodation

Round portable service cords of diameters commensurate with the device rating as defined in UL Standard 62, CSA C22.2 No. 49 and the harmonized European Standards.

Cover Screw/Rivet

Aluminum

Gaskets

Neoprene

Dielectric Withstand Voltage

Withstands 3,000V AC Min.

Weight in LBs

12.45

Voltage

250V DC/600V AC

Service Style

Reversed

Grommet/Glands

Neoprene

Gland Cap

Expoy Painted Aluminum

Product Identification

Identification and ratings are a permanent part of the device housing.

Cord Clamp Screws

Stainless Steel (300 Series)

Endurance

Up to 1,000 connect and disconnect cycles at full rated current and voltage.

Ground Bracket

Nickel Plated Spring Bronze

Terminal Identification

Terminals identified in accordance with UL1682 (1, 2, 3, Green).

Clamp Nut

Nickel Plated Brass

Terminal Accommodations

#1 To #250 KCMIL copper wire only

Current Interrupting

Certified for current interruption at full pated current.

Flammability

UL 94V-0 and CSA C22.2 No.0.17

Moisture Resistance

Type 3, 4, 4X per UL 50 and CSA C22.2, No. 94.

Device

Connector

Poles and Wires

2 Pole, 3 Wire

Springs, Arm and Wave

Stainless Steel (300 series)

Temperature Rise

Max 30° C temperature rise at full rated current after 50 cycles of overload at 150% of rated current.

Cover

Epoxy Painted Aluminum

Ground/Phase Sleeve

Brass

Insulgrip Grounding Style

Style II

Max Working Voltage

600V AC RMS (i.e., minimum creepage and clearance distance of 6.4 mm, per UL 1682).

Housing

Epoxy Painted Aluminum

Terminal Screws

Heat treated and Zinc Plated Steel

Operating Temperatures

Maximum Continuous: 75° C; Minimum Continuous: -40° C w/o impact, -25° with impact.

Spring Guide

Stainless Steel (300 series)