HBL3200PS2WR

Specifications

Certification

UL Listed, UL Standard 1682, UL50 and UL1010 (plugs only), CSA Certified to CSA C22.2 No. 182.1, No.94 and No. 159 (plugs only), UL Listed and CSA Certified Type 4X.

Weight in LBs

11.15

Retainer

Thermoset Polyester

Operating Temperatures

Maximum Continuous: 75° C; Minimum Continuous: -40° C w/o impact, -25° with impact.

Cord Grip Retention

Per CSA C22.2 N0. 182.1 / UL1682

Product Identification

Identification and ratings are a permanent part of the device housing.

Shroud

Aluminum

Terminal Accommodations

#1 To #250 KCMIL copper wire only

Device

Plug

Lock Ring

Epoxy Painted Aluminum

Replacement Interior Number

IN3200FS2

Gland Cap

Expoy Painted Aluminum

Hazardous Locations

Plugs Only- Class I, Division I & II, Groups B & C & D and Class II Division I & II, Groups F & G per UL 1010 & CSA 22.2, No. 459.

Grommet/Glands

Neoprene

Cord clamp range

1.00" To 2.50"

Poles and Wires

2 Pole, 3 Wire

Impact Resistance

Per CSA C22.2 N0. 182.1 / UL1682

Product Type

insulgrip-devices

Flammability

UL 94V-0 and CSA C22.2 No.0.17

Temperature Rise

Max 30° C temperature rise at full rated current after 50 cycles of overload at 150% of rated current.

Amperage

200A

Certifications

UL Listed, UL Standard 1682, UL 50, and UL 1010 (plugs only) CSA Certified to CSA Spec. C22.2 No. 182.1, No. 94 and No. 159 (plugs only) UL Listed, CSA Certified Type 4X.

Cord Clamps

Expoy Painted Aluminum

Dielectric Withstand Voltage

Withstands 3,000V AC Min.

Current Interrupting

Certified for current interruption at full pated current.

Endurance

Up to 1,000 connect and disconnect cycles at full rated current and voltage.

Assembly Screws

Stainless Steel (300 series)

Cord Clamp Screws

Stainless Steel (300 Series)

Moisture Resistance

Type 3, 4, 4X per UL 50 and CSA C22.2, No. 94.

Gaskets

Neoprene

Service Style

Reversed

Cord Accommodation

Round portable service cords of diameters commensurate with the device rating as defined in UL Standard 62, CSA C22.2 No. 49 and the harmonized European Standards.

Terminal Identification

Terminals identified in accordance with UL1682 (1, 2, 3, Green).

Ground/Phase Pins

Brass

Ground Bracket

Nickel Plated Spring Bronze

Max Working Voltage

600V AC RMS (i.e., minimum creepage and clearance distance of 6.4 mm, per UL 1682).

Voltage

250V DC/600V AC

Terminal Screws

Heat treated and Zinc Plated Steel

Insulgrip Grounding Style

Style II

Contact Carrier

Thermoset Polyester

Pin/Sleeve Spring

Beryllium Copper

Housing

Epoxy Painted Aluminum