Hubbell Wiring Device-Kellems
HBL330CS2W
The interchangeable product line, INSULGRIP pin and sleeve features metallic where you want it and non-metallic where you need it offers two different styles of grounding.
- Get up to 90 days payment terms from 500+ suppliers
- Reselling discounts up to 40%!
Send request for price
1
Payment methods:
Additional Information
- Part Number
- HBL330CS2W
- UPC
- 783585010083
- UNSPSC
- 39121421
- Country of Origin
- PR
Specifications
- Weight in LBs
- 2
- Contact Carrier
- Thermoset Polyester
- Flammability
- UL 94V-0 and CSA C22.2 No.0.17
- Ground Bracket
- Nickel Plated Spring Bronze
- Cord Grip Retention
- Per CSA C22.2 N0. 182.1 / UL1682
- Service Style
- Standard
- Clamp Nut
- Nickel Plated Brass
- Hinge Bushing
- Aluminum
- Ground/Phase Pins
- Brass
- Certifications
- UL Listed, UL Standard 1682, UL 50, and UL 1010 (plugs only) CSA Certified to CSA Spec. C22.2 No. 182.1, No. 94 and No. 159 (plugs only) UL Listed, CSA Certified Type 4X.
- Product Type
- insulgrip-devices
- Voltage
- 250V DC/600V AC
- Certification
- UL Listed, UL Standard 1682, UL50 and UL1010 (plugs only), CSA Certified to CSA C22.2 No. 182.1, No.94 and No. 159 (plugs only), UL Listed and CSA Certified Type 4X.
- Cord Clamp Screws
- Stainless Steel (300 Series)
- Retainer
- Thermoset Polyester
- Insulgrip Grounding Style
- Style II
- Gaskets
- Neoprene
- Temperature Rise
- Max 30° C temperature rise at full rated current after 50 cycles of overload at 150% of rated current.
- Cord Accommodation
- Round portable service cords of diameters commensurate with the device rating as defined in UL Standard 62, CSA C22.2 No. 49 and the harmonized European Standards.
- Cover Screw/Rivet
- Aluminum
- Terminal Identification
- Terminals identified in accordance with UL1686 (1, 2, 3, Green).
- Amperage
- 30A
- Housing
- Valox 357
- Springs, Arm and Wave
- Stainless Steel (300 series)
- Spring Washer
- Stainless Steel (300 series)
- Endurance
- Up to 1,000 connect and disconnect cycles at full rated current and voltage.
- Current Interrupting
- Certified for current interrupting at full rated current.
- Operating Temperatures
- Maximum Continuous: 75° C; Minimum Continuous: -40° C w/o impact, -25° with impact.
- Shroud
- Epoxy Painted Aluminum
- Product Identification
- Identification and ratings are a permanent part of the device housing.
- Terminal Screws
- Heat treated and Zinc Plated Steel
- Max Working Voltage
- 600V AC RMS (i.e., minimum creepage and clearance distance of 6.4 mm, per UL 1682).
- Grommet/Glands
- Neoprene
- Impact Resistance
- Per CSA C22.2 N0. 182.1 / UL1682
- Cord Clamps
- Rynite SST35
- Cover
- Epoxy Painted Aluminum
- Spring Guide
- Stainless Steel (300 series)
- Terminal Accommodations
- #10 To #8 AWG copper wire only
- Poles and Wires
- 2 Pole, 3 Wire
- Moisture Resistance
- Type 3, 4, 4X per UL 50 and CSA C22.2, No. 94.
- Replacement Interior Number
- IN330FS2
- Device
- Connector
- Gland Cap
- Rynite SST35
- Cord clamp range
- .600" To .990"
- Pin/Sleeve Spring
- Beryllium Copper
- Ground Standoff
- Brass
- Dielectric Withstand Voltage
- Withstands 3,000V AC Min.
Related products
Other Categories
ActuatorsBlocksCables, Pipes & HosesCompressorsControlCouplings & FittingsCylinders & PistonsElectronicsFiltersHVACIndustrial PC's & HMIsLightingLinear techniqueMotorsPower SupplyPower TransmissionPumps & ValvesRenewable energyRoboticsSeals, Rings & ConnectorsSensors & Measuring DevicesTools and AccessoriesCNCOther