HBL4100C7W

Specifications

Flammability

HB or Better per UL 94 or CSA C22.2 No. 0.17

Terminal Identification

Terminals identified in accordance with North American and IEC conventions.

IEC Product Type

Watertight

Housing

Zytel 801 Nylon

Cover Arm

Rynite SST35

Certification

UL Listed, File E146032 Receptacles and Inlets, E146033 Plugs and Connectors, UL Standard UL1682 & UL1686C2, CSA Certified File LR280C for Plugs, Connectors and Inlets, LR285C for Receptacles, CSA Standard C22.2 No. 182.1, UL Classified to IEC60309-1, IEC

Temperature Rise

Max 30° C temperature rise at full rated current after 50 cycles of overload at 150% of rated current at a power factor of 75%.

Poles and Wires

3 Pole, 4 Wire

Ingress Protection

IP 67 Suitability

Max Working Voltage

600V RMS (i.e.minimum creepage distance 10 mm minimum)

Amperage

100A

Cord Clamp Screws

Stainless Steel (300 Series)

Product Identification

Identification and ratings are a permanent part of the device housing.

Replacement Interior Number

IN4100DF

Current Interrupting

Certified for current interrupting at full rated current.

Device

Connector

Terminal Screws

Stainless Steel (300 series)

Arm Spring

Stainless Steel (17-1 Type)

Service Style

Standard

Gaskets

Solid Neoprene

Weight in LBs

4.8

Moisture Resistance

Watertight per IEC 60309-1

Dielectric Withstand Voltage

Withstands 3,000V AC Min.

Color

red

Cover Screw/Rivet

Nickel Plated Brass

Terminal Accommodations

#3 To #1/0 AWG copper wire only

Cover

Rynite SST35

Impact Resistance

Per CSA C22.2 No. 182.1 / UL1682.

Clamp Nut

Nickel Plated Brass

Product Type

iec-devices

Cord Accommodation

Round portable service cords of diameters commensurate with the device rating as defined in UL Standard 62, CSA C22.2 No. 49 and the harmonized European Standards.

Contact Carrier

High-Impact Thermoset

Cord clamp range

1.065" To 1.940"

Cord Clamps

Rynite SST35

Grommet/Glands

Solid Neoprene

Ground/Phase Sleeve

Brass

Assembly Screws

Stainless Steel (300 series)

Rotating Sealing Disc

Polycarbonate

Retainer

High-Impact Thermoset

Endurance

5,000 connect and disconnect cycles with load for 16A and 20A, 1,000 cycles with load and 1,000 cycles w/o load for 30A, 32A, 60A and 63A, and 250 cycles with load and 250 cycles w/o load for 100A and 125A.

Voltage

3 Phase 480V

Certifications

UL Listed, UL Standard 498 CSA Certified to CSA Spec. C22.2 No. 182.2 UL Classified to IEC 309-1 and IEC 309-2.

Cord Grip Retention

Per CSA C22.2 No. 182.1 / UL1682.

Pin/Sleeve Spring

Beryllium Copper multi-contact insert with silver plating.

Operating Temperatures

Maximum Continuous: 75° C; Minimum Continuous: -40° C w/o impact.