HBL4200PS1WR

Specifications

Certifications

UL Listed, UL Standard 1682, UL 50, and UL 1010 (plugs only) CSA Certified to CSA Spec. C22.2 No. 182.1, No. 94 and No. 159 (plugs only) UL Listed, CSA Certified Type 4X.

Weight in LBs

11.1

Product Type

insulgrip-devices

Amperage

200A

Current Interrupting

Certified for current interrupting at full rated current.

Contact Carrier

Thermoset Polyester

Assembly Screws

Stainless Steel (300 series)

Cord Clamps

Epoxy Painted Aluminum

Replacement Interior Number

Consult Factory

Cord clamp range

1.00" To 2.50"

Housing

Epoxy Painted Aluminum

Product Identification

Identification and ratings are a permanent part of the device housing.

Terminal Accommodations

#1 To #250 KCMIL copper wire only

Cord Accommodation

Round portable service cords of diameters commensurate with the device rating as defined in UL Standard 62, CSA C22.2 No. 49 and the harmonized European Standards.

Impact Resistance

Per CSA C22.2 N0. 182.1 / UL1682

Shroud

Aluminum

Device

Plug

Voltage

250V DC/600V AC

Poles and Wires

3 Pole, 4 Wire

Dielectric Withstand Voltage

Withstands 3,000V AC Min.

Certification

UL Listed, UL Standard 1682, UL50 and UL1010 (plugs only), CSA Certified to CSA C22.2 No. 182.1, No.94 and No. 159 (plugs only), UL Listed and CSA Certified Type 4X.

Cord Clamp Screws

Stainless Steel (300 Series)

Terminal Identification

Terminals identified in accordance with UL1682 (1, 2, 3, Green).

Retainer

Thermoset Polyester

Terminal Screws

Heat treated and Zinc Plated Steel

Ground/Phase Pins

Brass

Operating Temperatures

Maximum Continuous: 75° C; Minimum Continuous: -40° C w/o impact, -25° with impact.

Service Style

Reversed

Temperature Rise

Max 30° C temperature rise at full rated current after 50 cycles of overload at 150% of rated current.

Pin/Sleeve Spring

Beryllium Copper

Gland Cap

Epoxy Painted Aluminum

Max Working Voltage

600V AC RMS (i.e., minimum creepage and clearance distance of 6.4 mm, per UL 1682).

Hazardous Locations

Plugs Only- Class I, Division I & II, Groups B & C & D and Class II Division I & II, Groups F & G per UL 1010 & CSA 22.2, No. 459.

Endurance

Up to 1,000 connect and disconnect cycles at full rated current and voltage.

Insulgrip Grounding Style

Style I

Lock Ring

Epoxy Painted Aluminum

Grommet/Glands

Neoprene

Gaskets

Neoprene

Ground Bracket

Nickel Plated Spring Bronze

Moisture Resistance

Type 3, 4, 4X per UL 50 and CSA C22.2, No. 94.

Flammability

UL 94V-0 and CSA C22.2 No.0.17

Cord Grip Retention

Per CSA C22.2 N0. 182.1 / UL1682