HBL420C5W

Specifications

Flammability

HB or Better per UL 94 or CSA C22.2 No. 0.17

Grommet/Glands

Solid Neoprene

Endurance

5,000 connect and disconnect cycles with load for 16A and 20A, 1,000 cycles with load and 1,000 cycles w/o load for 30A, 32A, 60A and 63A, and 250 cycles with load and 250 cycles w/o load for 100A and 125A.

Service Style

Standard

Replacement Interior Number

IN420DF

Terminal Screws

Stainless Steel (300 series)

Cord clamp range

.330" To .830"

Terminal Identification

Terminals identified in accordance with North American and IEC conventions.

Clamp Nut

Nickel Plated Brass

Dielectric Withstand Voltage

Withstands 3,000V AC Min.

Impact Resistance

Per CSA C22.2 No. 182.1 / UL1682.

Rotating Sealing Disc

Polycarbonate

Retainer

High-Impact Thermoset

Cover

Rynite SST35

Voltage

3 Phase 600V

Temperature Rise

Max 30° C temperature rise at full rated current after 50 cycles of overload at 150% of rated current at a power factor of 75%.

Gaskets

Solid Neoprene

IEC Product Type

Watertight

Cord Accommodation

Round portable service cords of diameters commensurate with the device rating as defined in UL Standard 62, CSA C22.2 No. 49 and the harmonized European Standards.

Operating Temperatures

Maximum Continuous: 75° C; Minimum Continuous: -40° C w/o impact.

Ingress Protection

IP 67 Suitability

Cord Grip Retention

Per CSA C22.2 No. 182.1 / UL1682.

Color

black

Product Identification

Identification and ratings are a permanent part of the device housing.

Weight in LBs

1.3

Certifications

UL Listed, UL Standard 498 CSA Certified to CSA Spec. C22.2 No. 182.2 UL Classified to IEC 309-1 and IEC 309-2.

Cover Arm

Rynite SST35

Max Working Voltage

600V RMS (i.e.minimum creepage distance 10 mm minimum)

Device

Connector

Poles and Wires

3 Pole, 4 Wire

Amperage

20A

Current Interrupting

Certified for current interrupting at full rated current.

Cord Clamps

Rynite SST35

Ground/Phase Sleeve

Brass

Moisture Resistance

Watertight per IEC 60309-1

Contact Carrier

High-Impact Thermoset

Arm Spring

Stainless Steel (17-1 Type)

Cover Screw/Rivet

Nickel Plated Brass

Certification

UL Listed, File E146032 Receptacles and Inlets, E146033 Plugs and Connectors, UL Standard UL1682 & UL1686C2, CSA Certified File LR280C for Plugs, Connectors and Inlets, LR285C for Receptacles, CSA Standard C22.2 No. 182.1, UL Classified to IEC60309-1, IEC

Housing

Zytel 801 Nylon

Terminal Accommodations

#14 To #10 AWG copper wire only

Assembly Screws

Stainless Steel (300 series)

Cord Clamp Screws

Stainless Steel (300 Series)

Product Type

iec-devices

Pin/Sleeve Spring

Stainless Steel (300 Series)