HBL420P12W

Specifications

Gland Cap

Rynite SST35

Ground/Phase Pins

Brass

Endurance

5,000 connect and disconnect cycles with load for 16A and 20A, 1,000 cycles with load and 1,000 cycles w/o load for 30A, 32A, 60A and 63A, and 250 cycles with load and 250 cycles w/o load for 100A and 125A.

Retainer

High-Impact Thermoset

Contact Carrier

High-Impact Thermoset

Dielectric Withstand Voltage

Withstands 3,000V AC Min.

Terminal Accommodations

#14 To #10 AWG copper wire only

Cord Clamps

Rynite SST35

Replacement Interior Number

IN420CM

Color

orange

Impact Resistance

Per CSA C22.2 No. 182.1 / UL1682.

Current Interrupting

Certified for current interrupting at full rated current.

Operating Temperatures

Maximum Continuous: 75° C; Minimum Continuous: -40° C w/o impact.

IEC Product Type

Watertight

Product Type

iec-devices

Assembly Screws

Stainless Steel (300 series)

Grommet/Glands

Solid Neoprene

Cord Clamp Screws

Stainless Steel (300 Series)

Lock Ring

Rynite SST35

Certification

UL Listed, File E146032 Receptacles and Inlets, E146033 Plugs and Connectors, UL Standard UL1682 & UL1686C2, CSA Certified File LR280C for Plugs, Connectors and Inlets, LR285C for Receptacles, CSA Standard C22.2 No. 182.1, UL Classified to IEC60309-1, IEC

Terminal Identification

Terminals identified in accordance with North American and IEC conventions.

Terminal Screws

Stainless Steel (300 series)

Cord Grip Retention

Per CSA C22.2 No. 182.1 / UL1682.

Ingress Protection

IP 67 Suitability

Voltage

125/250V

Clamp Nut

Nickel Plated Brass

Device

Plug

Amperage

20A

Product Identification

Identification and ratings are a permanent part of the device housing.

Flammability

HB or Better per UL 94 or CSA C22.2 No. 0.17

Cord Accommodation

Round portable service cords of diameters commensurate with the device rating as defined in UL Standard 62, CSA C22.2 No. 49 and the harmonized European Standards.

Poles and Wires

3 Pole, 4 Wire

Housing

Zytel 801 Nylon

Service Style

Standard

Weight in LBs

0.95

Certifications

UL Listed, File E146032 Receptacles and Inlets, E146033 Plugs and Connectors, UL Standard UL1682 & UL 1686C2, CSA Certified File LR280C for Plugs, Connectors and Inlets and LR285C for Receptacle CSA Standard C22.2 No. 182.2, UL Classified to IEC 309-1 and

Temperature Rise

Max 30° C temperature rise at full rated current after 50 cycles of overload at 150% of rated current at a power factor of 75%.

Cord clamp range

.330" To .830"

Moisture Resistance

Watertight per IEC 60309-1

Max Working Voltage

600V RMS (i.e.minimum creepage distance 10 mm minimum)