HBL430C12W

Specifications

Retainer

High-Impact Thermoset

Terminal Screws

Stainless Steel (300 series)

Housing

Zytel 801 Nylon

Terminal Identification

Terminals identified in accordance with North American and IEC conventions.

Rotating Sealing Disc

Polycarbonate

Cord Grip Retention

Per CSA C22.2 No. 182.1 / UL1682.

Clamp Nut

Nickel Plated Brass

Replacement Interior Number

IN430CF

Terminal Accommodations

#12 To #8 AWG copper wire only

Service Style

Standard

Cover

Rynite SST35

Cord Accommodation

Round portable service cords of diameters commensurate with the device rating as defined in UL Standard 62, CSA C22.2 No. 49 and the harmonized European Standards.

Product Identification

Identification and ratings are a permanent part of the device housing.

Cover Arm

Rynite SST35

Arm Spring

Stainless Steel (17-1 Type)

Certifications

UL Listed, UL Standard 498 CSA Certified to CSA Spec. C22.2 No. 182.2 UL Classified to IEC 309-1 and IEC 309-2.

Certification

UL Listed, File E146032 Receptacles and Inlets, E146033 Plugs and Connectors, UL Standard UL1682 & UL1686C2, CSA Certified File LR280C for Plugs, Connectors and Inlets, LR285C for Receptacles, CSA Standard C22.2 No. 182.1, UL Classified to IEC60309-1, IEC

Poles and Wires

3 Pole, 4 Wire

Cord Clamps

Rynite SST35

IEC Product Type

Watertight

Flammability

HB or Better per UL 94 or CSA C22.2 No. 0.17

Contact Carrier

High-Impact Thermoset

Moisture Resistance

Watertight per IEC 60309-1

Gaskets

Solid Neoprene

Color

orange

Assembly Screws

Stainless Steel (300 series)

Ground/Phase Sleeve

Brass

Temperature Rise

Max 30° C temperature rise at full rated current after 50 cycles of overload at 150% of rated current at a power factor of 75%.

Operating Temperatures

Maximum Continuous: 75° C; Minimum Continuous: -40° C w/o impact.

Weight in LBs

1.85

Ingress Protection

IP 67 Suitability

Cover Screw/Rivet

Nickel Plated Brass

Dielectric Withstand Voltage

Withstands 3,000V AC Min.

Device

Connector

Amperage

30A

Impact Resistance

Per CSA C22.2 No. 182.1 / UL1682.

Product Type

iec-devices

Cord Clamp Screws

Stainless Steel (300 Series)

Pin/Sleeve Spring

Stainless Steel (300 Series)

Cord clamp range

.375" To 1.250"

Max Working Voltage

600V RMS (i.e.minimum creepage distance 10 mm minimum)

Grommet/Glands

Solid Neoprene

Current Interrupting

Certified for current interrupting at full rated current.

Voltage

125/250V

Endurance

5,000 connect and disconnect cycles with load for 16A and 20A, 1,000 cycles with load and 1,000 cycles w/o load for 30A, 32A, 60A and 63A, and 250 cycles with load and 250 cycles w/o load for 100A and 125A.